www.galaxykorea.com
Galaxy Premium Juicer
Instruction Manual
Customer
Service
This is a universal user’s manual, and the color of the product can vary depends on each model.
The color and specification of a product can be changed without any prior notice to improve the quality
of the product.
02
01
Name of Each part
1. Hopper
(Funnel)
2. Drum Lid
3. Pulp Cup
4. Juicing Bowl
5. Juice Cup
7. Juicing Screw 8. Rotation Wiper 9. Strainer
10. Pusher 11. Cleaning Brush 12. Tofu Mold
Depending on the product model, the actual product's color may be different.
How to assemble Juicing Bowl Set
How to assemble Juicing bowl set and Base
Align the red on each part and
put them together in order. Align
the red on the drum lid and
close it by turning clockwise.
After raising the juicing bowl set
on the base, align the black
upside point in the drum lid
with the point in the base and
turn it in the direction of (close)
direction.
04
03
Detailed Assembly Method
/ Assembly Method for Juicing Bowl Set / Assembly Method for Juicing Bowl Set and Base
Before the usage,
please check!
Use the set after sufficiently washing the juicing bowl set.
Check that squeeze silicon and silicon ring are correctly plugged.
Fully fit the squeeze silicon to the bottom of
the container in the direction of arrow as
shown in the photo.
Fit the rotation wiper to the strainer and
align the point in the strainer and
rotation wiper to assemble.
Caution
If the squeezed silicon and the silicon ring
is not completely fitted in, the juice amount
may be little or the juice may seep out.
Caution
When assembling the juicing bowl set to
the base, securely turn it until a clicking
sound is made. If it is not tightened
properly, it does not operate.
Turn the screw in the center of strainer
and gently press it down.
Align each of points in the juicing bowl
set and drum lid, and turn it in clockwise
direction to align at point to close it.
Caution
If the screw is not fully tightened, bowl and
drum cannot be tightened.
After raising the juicing bowl set on the
base, point in the drum lid with point
in the base and turn it in the direction of
(close) direction
Match the pulp cup and juice up at the
outlet as shown in the photo.
Silicon Ring/Silicon Brush
After separating it for washing, it must be put
back in the direction shown in the photo for use.
Put the wide surface to the top to use.
Aim the tail side to the bottom to use.
Depending on the product model, the actual product's color may be different.
06
05
Usage Method
After getting the prepared ingredients ready, plug the power plug into the outlet
and then turn on the power.
Press the "FORWARD" of operation switch to begin its operation.
Insert cleanly prepared ingredients one by one to the slot.
Caution
Caution
Caution
Caution
Do not operate the power plug with wet hands.
Check that the condition of the outlet is proper.
Forward: Press the ingredients down to do low-speed squeeze extraction
Reverse: Turn the ingredients in reverse direction to the top.
If the screw stops or opening the lid is difficult due to inserting too much ingredients,
press reverse ↔ stop ↔ forward for about 2~3 times repeatedly.
(This can be the cause of electric shock, electric leakage, or fire.)
*
If the product suddenly stops during operation
If the product suddenly stops during operation, then set the switch to "stop," press the "reverse"
to push up the ingredients that are stuck in the screws, and then press the "forward" again.
reverse ↔ stop ↔ forward for about 2~3 times repeatedly
ForwardReverseStop
Reverse: Turn the ingredients in reverse direction to the top.
While the "forward" rotation is going on, first press the "stop" switch to fully stop the operation and
then press the "reverse" switch.
If the product is still not working properly, separate the juicing bowl and wash it to use.
(reverse switch only operates while it is pressed).
(Pressing the "reverse" switch while the "forward" rotation is going on may be the cause of malfunctioning.)
While extracting, prepare the ingredient according to its characteristics.
If the release of residues are not fully finished after the extraction, the lid may not open.
For ingredients with strong fiber:
(After finishing the extraction, release the remaining pulp in the screw for about 30 seconds.)
Leafy vegetables (celery, water celery, angelica, kale, and others)
and ingredientswith long and strong fiber
Stem part 3~5cm or under (1cm or under for angelica), and leaf part should be
rolled for extraction
For fruits with hard seeds, remove the seeds, and even the small sizes of frozen
ingredients should be fully thawed before they can be used.
For more detailed information, please refer to p18~p27.
When inserting too much ingredients at once, the operation may be stopped,
so slowly insert one at a time.
Once the juice and pulp are fully released at the end of extraction,
"stop" the operation switch.
If the lid does not open easily at this time, repeatedly press reverse ↔ stop ↔ forward
for about 2~3 times, and with the palm of the hand tightly pressed down on the top
side of the drum lid, turn it to open.
Depending on the ingredient, water may be added to the slot to do simple washing, and then
turn the lid to open.
Forward : Press the ingredients down to do low-speed squeeze extraction /
Stop : Stop the operation. / Reverse : Turn the ingredients in reverse direction to the top.
08
07
Disassembling and Cleaning Method Disassembling and Cleaning Method
Depending on the product model, the actual product's color may be different. Depending on the product model, the actual product's color may be different.
After placing the operation switch on “stop”,
unplug the cord.
From the container, disassemble the rotation
wiper, strainer, and screw. After disassembling each parts in the reverse order of
assembling, wash with a soft brush.
After turning the container lid in counterclockwise direction, disassemble by pulling
up the drum lid.
After turning the juicing bowl set in
counterclockwise direction, disassemble by
pulling up the juicing bowl set.
Clean the main body by wiping it with a soft,
lightly moistened cloth.
Caution
Caution
Stop after all of the juicing bowl set is
eliminated of the pulp.
Please be aware that if you do not immediately wash
after usage, debris will dry off and not only make
disassemble and cleaning hard, but also becomes the
cause of decrease in operation efficiency.
Caution
If the squeezed silicon and the silicon ring are not completely fitted
in, the juice amount may be little or the juice may seep out.
Caution
If the washing cloth has much moisture, be sure
to remove the excessive water by squeezing the
towel out well before wiping.
The juicing bowl set disassembling can be easily
disassembled in the sink by letting tap water flow from
top to bottom.
Dry off well so that the inner side of the metal part in the
screw shaft does not have any moisture.
Depending on the ingredient, if opening the lid is
difficult, repeat 2~3 times of reverse ↔ stop ↔
forward rotation and then firmly press the drum lid’s
top side with the palm of your hand and open by
turning.
For convenient washing, after the juicing
is completed, run it for about 30 seconds.
Depending on the ingredient, insert water
into the slot as a quick washing, and then
turn the lid.
※
Clean the rotating wiper under running water.
Always use it when it is dried after washing. Before assembling the juicing bowl set,
be sure to check if the squeezed silicon and silicon ring is correctly fitted in.
Assembling After Washing Silicon Brush
Assembling After Washing Squeezed Silicon
Assembling After Washing Silicon Ring
<Silicon Brush>
Separate washing is possible.
After washing, point the silicon brush’s
tail part in the downward direction, and
as shown in the picture, place in the
middle wide space and fit in the order of
down → up and then use.
<Squeezed Silicon>
Can be opened and then washed.
After washing as shown in the picture,
place it in the direction of the arrow and
then use.
<Silicon Ring>
Separate washing is possible.
After washing, fit in the silicon ring in the
home accurately by having the wide
surface in the upper direction as shown
in the picture.
10
09
Screw Cleaning Method Option | Rotating Brush Usage Instruction
Caution
Be sure to thoroughly wash the screw even under the dip in the screw when used with seeded
ingredients (rubus coreanus, grape, and etc.). If there are leftover seeds in the screw during
juicing, the screw and the strainer may move in irregular motion resulting in sharpening of the
screw.
Caution
Push it in until you hear the clicking sound.
Depending on the product model, the actual product's color may be different. Depending on the product model, the actual product's color may be different.
Thoroughly wash the screw with a cleaning brush under running water.
After washing with water, use it after it is dried.
Before assembling the juicing bowl set, be sure to always check if there are any
debris on the screw.
Juice net can be more conveniently and easily cleansed by using
the rotating brush.
Always use it when it is dried after washing.
Under running water,
thoroughly wash the outside
of the screw.
By using the end of the
cleaning brush, eliminate
debris (seeds, little bits of
food) stuck in the home part
of the screw.
Hold and fix the rotating brush with one hand
and fit in the strainer.
Under running water, wash the cleaning brush and
strainer’s inside and out alternately.
Alternately rinse the cleaning brush and the inside
and outside of juice net with running water.
After washing, disassemble the rotating brush and
the juice net.
Store the disassembled product after they are dried.
Loading...