GAI-Tronics XCP0080A User Manual

Pub. 43003-019B

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model XCP0080A Battery Revert Kit

Field Installation Kit Instructions

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model XCP0080A Battery Revert Kit for the ICP9000 Series Desktop Console or the ICP9000
Navigator Series MCU provides the ability to connect external back-up power. The kit provides the
following component:

Qty Description

1 Power Supply with auxiliary dc power connections

Note: The ICP9000 Series Desktop Console and the ICP9000 Navigator Series MCU, as shipped from
the factory, contains the necessary battery revert circuitry already present on the main PCBA.

Installation

1. Disconnect the power from the ICP9000 Series Desktop Console or ICP9000 Navigator Series MCU.

Then, disconnect existing power supply.

2. Connect the battery revert power supply by plugging in the DIN plug into the rear of the console or

MCU. Refer to the Figure 1.

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374 n 800-492-1212 n Fax: [phone]

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Pub. 43003-019B

Model XCP0080A Battery Revert Kit Page: 2 of 2

3. Connect the red (+) and black (-) cables from the power supply DIN plug to a 12 volt dc power

source.
Note: External source voltage must be between 11 V dc and 16 V dc.

4. Reconnect the power.

Figure 1.

1102