GAI-Tronics 709-901 User Manual

Pub. 42006-012B

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Addendum to Model 709-901

SmartSeries Handset/Speaker Amplifier

Confidential ity Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

Procedure

Your Model 709-901 Handset/Speaker Amplifier comes equipped with a 61504-121 Plug Assembly
installed on P2. This plug assembly must be removed and discarded when the Model 709-901 is used in
conjunction with the Model 708 or 7085 Series Handset Station Enclosures. Use extra care not to damage
the protruding latch wings of connector J2 located on the bottom edge of the amplifier during installation.

This plug assembly must be allowed to remain in place when the Model 709-901 is used with Model 707
Series Speaker Amplifier Enclosures. Refer to Figure 1 below:

Figure 1.

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374  800-492-1212  Fax: [phone]

V

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Pub. 42006-012B

Addendum to Model 709-901 SmartSeries Handset/Speaker Amplifier Page: 2 of 2

Supplemental Inf ormation

Reference Documentation

For additional information, plea se ref er to Pub. 42004-699L2, Model 709- 901 SmartS er ies
Handset/Speaker Amplifier Manual.

f:\standard ioms - cur rent release\42006 field maint bulletins\42006-012b.doc
03/11