Gai-tronics 702-006 User Manual
Pub. DS702-006
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Model 702-006
Single-Party Amplifier Enclosure
General Information
This data sheet applies to the Model 702-006 Single-Party Amplifier Enclosure, which is a component of
the 700 Series Page/Party< system. It is constructed of fabricated steel and is extremely weatherproof and
corrosion-resistant. This enclosure is equipped with terminal strips for connecting system cable. The
Page/Party
For continued IP 66 protection, torque setting for securing the amplifier to the enclosure should be 10 to
12 in-lbs. or 1.13 to 1.36 n-m.
®
Series Amplifiers mate directly with this enclosure.
Figure 1. Model 702-006 Single Party Enclosure
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. DS702-006
Model 702-006 Single-Party Amplifier Enclosure Page:
2 of 2
Specifications
Construction/finish................................................................. 16-gauge cold-rolled steel/gray polyurethane
Mounting............................................................................. Wall or column, four 5/16-inch mounting holes
Connections ............................................................................... Internal screw-type barrier terminal blocks
Dimensions ................................................................ 9.6 H × 8.1 W × 5.1 D inches (245 × 206 × 129 mm)
Temperature range (operating and storage) ........................................ −22º F to +158º F (−30º C to +70º C)
Shipping weight .................................................................................................................... 5.5 lbs. (2.5 kg)
Approvals
Model 702-006 Enclosure............................................................................................. II 3G EEx nA IIC T6
Temp -30 to 70ºC
Location Zone 2
IP 66 when installed with a Model 701-305, 751-005, 701-905, or 751-905 Amplifier
NRTL listed ..............................Suitable for use in hazardous locations Class I, Div. 2, Groups A, B, C, D;
Class II, Div. 2, Groups F, G;
Class III, Div. 2
when used with listed 701-305, 701-905, 751-005 or 751-905 Amplifier
Enclosure environmental rating: Type 13
CE Mark
Certificate No. DEMKO 04 ATEX 0424225X
Notified Body Id No. 0539
UL International DEMKO A/S
Lyskear 8
DK-2730 Herlev
Denmark
f:\standard ioms - current release\data sheets\ds702-006.doc
11/10
Loading...