GAI-Tronics 12510-002, 12510-003 User Manual
Pub. 42003-222A
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Access Panel Replacement Kits
Models 12510-002 and 12510-003
Confidentiality Notice
This manua l is provide d sole ly as an operatio nal, installation, and ma inte nance guide and conta ins
sensitive business and t e chnical informatio n tha t is confidentia l and pr opri et ary to GAI- Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manu al may not be dis clos e d in any form, in whole or in pa rt, direct ly or i ndir ectly, to a ny
third pa r ty.
General Information
The Model 12510-002 Small Access Panel Kit and Model 12510-003 Large Access Panel Kit are needed
to mount the 10458-xxx Electronics Paging Module in either the Stanchion Broadcast Assembly, or in an
existing sta nchio n equ ippe d w ith a S tanchion Broadc ast Module.
The Model 12510-002 Kit contains the following:
Qty Description
1 Small Access Panel with gasket
4 Washers, felt
4 #10-32 Screws, tamper-resistant
4
The Model 12510-003 Kit contains the following:
Qty Description
1 Large Access Panel with gasket
6 Washers, felt
6 #10-32 Screws, tamper-resistant
4
Screws, ¼-20 × 3/4 Hex washer head (thread-cutting)
Screws, ¼-20 × 3/4 Hex washer head (thread-cutting)
Installation
1. Model 10458-xxx Electronics Paging Module should be attached to the access panel in accordance
with the Paging Module instructions, Pub. 42004-415.
2. All interconnections should be made to the paging module from speaker kits, beacon, antenna kits,
etc., before attaching Access Panel Kit to the stanchion body.
3. The Small Access Panel Kit should be attached to the stanchion body using the four #10-32 tamper-
resistant screws and four felt washers provided. The Large Access Panel Kit should be attached to
the stanchion body using the six #10-32 tamper-resistant screws and six felt washers provided.
GAI-Tronics Corporation 400 E. Wyomissing Av e. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
V
Pub. 42003-222A
M
ODEL 12510-002 AND 12510-003 ACCESS PANEL KITS Page: 2 of 2
4. Four ¼-20 × ¾-inch hex washer head thread-cutting screws are also supplied for mounting the
Stanchion Broadcast Module to the top of the stanchion. Refer to Pub. 42004-416 SBM Stanchion
Installation Manual.
Figure 1. Typical Application of Access Panel Kit
Figure 2. Exploded View of Access Panel Kits
\\s_eng\gtc proddoc s \st andard iom s - current release\42003 kit manuals \ 42003-222a.doc
10/08
Loading...