GAI-Tronics 12508-006 User Manual

Pub. 42003-250A

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Valox® Enclosure Mid-Section

Drain Hole Sealing Kit

Model 12508-006

Confidential ity Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model 12508-006 Valox® Enclosure Mid-Section Drain Hole Sealing Kit services the Model 272
Series Intrinsically Safe Telephones and the Model 351 Series Div. 2 Telephones.

It includes the following components:

Qty Description

3
3 Fiber washers

#7 × 3/8-inch thread-cutting screws

Sealing the Drain Holes

1. Locate and confirm that there are three drain holes on the bottom of the enclosure’s mid-section.

NOTE: If there are no existing drain holes, do not install the screws and washers provided in
this kit.

2. Using the supplied fiber washers and #7 thread-cutting screws, install as a sealing mechanism in each

of the three drain holes. Refer to Figure 1. Take care not to over-torque the screws when tightening.

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374  800-492-1212  Fax: [phone]

V

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Pub. 42003-250A

ODEL 12508-006 VALOX ENCLOSURE MID-SECTION DRAIN HOLE SEALING KIT Page: 2 of 2

M

Figure 1. Installation Location of the Sealing Screws and Fiber Washers.

f:\standard ioms - current release\42003 kit manuals\42003-250a.doc
12/11