GAI-Tronics 12505-004 User Manual
Pub. 42003-018H
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Replacement Door Kit for
Weatherproof Enclosures
MODELS 12505-005, 12505-005OR & 12505-005YL
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAITronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Models 12505-005, 12505-005OR and 12505-005YL are for use with engineered plastic
weatherproof enclosures and can be used with all other GAI-Tronics weatherproof products. This kit
includes the following components:
Qty Description Item No.
1 Door Assembly 1
2 Hinge Pin 2
1 Label 3
Installation
1. To remove the hinge pins, compress the slotted end of each pin with needle-nose pliers and drive the
pin upward.
2. Remove the door assembly from the enclosure.
3. Check the fit and clearance of the replacement door assembly by placing the door assembly in
position on the enclosure hinge bosses. File the material from the door bosses for more clearance, if
necessary.
4. Position the door assembly onto the enclosure with the hinge pin holes in alignment. Compress the
slotted end of each pin with needle-nose pliers and drive the pins downward through the holes in the
enclosure and hinge ears until completely inserted. See Figure 1.
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
V
Pub. 42003-018H
M
ODEL 12505-005, -005OR & -005YL REPLACEMENT DOOR KITS FOR WPF ENCLOSURES Page 2 of 2
5. Place the label on the outside center of the door if desired.
2
2
3
(ON OUTSIDE
OF DOOR)
1
Figure 1. Assembly Details
e:\standard ioms - current release\42003 kit manuals\42003-018h.doc
04/14
Loading...