Features .................................................................................................................................................... 1
Optional Zone Operation ...................................................................................................................................... 4
Optional AMI Redundancy ................................................................................................................................... 4
Field Wiring ............................................................................................................................................. 6
Digital Outputs ...................................................................................................................................................... 6
Digital Inputs ........................................................................................................................................................ 7
System ................................................................................................................................................................... 8
Power .................................................................................................................................................................... 9
Settings and Adjustments ..............................................................................................................10
Opening the Unit ................................................................................................................................... 10
Phone Line Levels .............................................................................................................................................. 11
Party Line Levels ................................................................................................................................................ 11
Page Line Levels ................................................................................................................................................. 11
600-Ohm Line Termination ................................................................................................................................ 11
Date and Time Set Up ........................................................................................................................... 13
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Table of Contents Pub. 42004-404F
MODEL 10959-207 AND -208RACK-MOUNT AUDIO MESSENGER INTERFACES
Date Set Up ......................................................................................................................................................... 13
Time Set Up ........................................................................................................................................................ 13
Play Message ...................................................................................................................................................... 16
Reset AMI ........................................................................................................................................................... 16
Optional Zone Groups......................................................................................................................................... 18
Replacement Parts ................................................................................................................................ 20
f:\standard ioms - current release\ 42004 instr. manuals\42004-404f.docx
11/13
PUB.42004-404F
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Model 10959-207 and -208
Rack-Mount Audio Messenger Interfaces
Confidential ity Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
Product Overview
The GAI-Tronics Audio Messenger Interface (AMI) tone/speech generator broadcasts live pages,
telephone pages, pre-recorded alarm tones, pre-recorded speech messages, etc., for use in virtually any
application.
Figure 1. Rack-Mount Audio Messenger Interface
Features
Recorded alarm tones
Eight inputs and eight outputs upgradeable to
40 inputs and outputs
600-ohm, 1 Vrms audio output
CompactFlash
®
memory
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
AMI Configuration Tool (ACT) PC Software
Scheduled events
Day/Night modes
Live/recorded speech messages
Integration to Page/Party
®
systems
Pub. 42004-404F
ODEL 10959-207 AND -208RACK-MOUNT AUDIO MESSENGER INTERFACES PAGE 2 of 20
M
Options
Telephone access
Integration to Page/Party
Up to 40 general inputs and 40 general outputs
Routability to eight controlled audio zones
AMI redundancy for system reliability
Integration to ADVANCE systems
Model Description
10959-207 AMI, Rack-Mount with Page/Party® Interface
10959-208 AMI Rack-Mount with Telephone Interface and Page/Party® Interface
12584-001 I/O Control Module Option
XDM002A Desktop Paging Microphone
®
systems
Table 1. Rack-Mount AMI Models and Accessories
10960-001 Zone Interface Module
10962-00x AMI Redundancy Controller
Configurations
Alarms
The ACT tool includes pre-recorded tones suitable for almost any application. The tones include typical
emergency tones (i.e., a siren, slow whoop, etc.) and signaling or process tones (i.e., a gong, steady tone,
etc.). All of the tones and speech messages broadcast by the AMI are stored in MP3 file format. For
applications where a required tone is not supplied, any tone recorded or stored in an MP3 file format can
be used with the AMI.
Inputs/Outputs
The AMI includes eight configurable inputs and outputs. Typically, the inputs are configured to activate
tones and/or speech messages, mute audio playback, or reset alarms. The outputs are typically used to
activate remote alarm systems, interface to automated process equipment or interface to paging system
equipment.
If the standard eight inputs and outputs are not sufficient for an application, an I/O Control Module can be
added to the system. The I/O control module includes 32 inputs and 32 digital outputs expanding the total
I/O to 40 each.
Timed Events
The AMI has the capability to perform several functions based on the time of day. With the ACT
software, events can be scheduled to occur at any interval (hourly, daily, weekly, monthly, etc.).
f:\standard ioms - current release\ 42004 instr. manuals\42004-404f.docx
11/13
Pub. 42004-404F
ODEL 10959-207 AND -208RACK-MOUNT AUDIO MESSENGER INTERFACES PAGE 3 of 20
M
Optional Telephone Operation
The Telephone Interface has multiple operational modes. The appropriate mode is configurable by the
AMI Configuration Tool software application.
The AMI can provide passcode-protected telephone access to the system. The AMI can be configured to
allow telephone access only if the correct Remote Access Security Code is entered. The remote access
code is used to prevent unwanted callers from directly accessing the system. If the system is configured
to use a security code, callers are required to enter the correct code to gain access to the system. Day and
Night modes can have different security codes.
The modes of operation are as follows:
®
Page/Party
- Delivers a live voice page (not pre-recorded) to the page line output. The party line is
held open following the page.
Record Page - Records a page, and delivers it to the page line output.
Mixed Mode - Records a page, delivers it to the page line output, and holds the party line open
following the page.
Live Page Mode - Delivers a live voice page (not pre-recorded) to the page line output. The party
line is not open following the page.
Ring Mode – Does not deliver a page, but instead plays a configured message on the page line to
signal the incoming call.
Manual/Disabled – The Telephone Interface does not automatically answer a phone call. However,
an input can be configured for “Manual Access” to allow an attendant to manually answer the phone,
and transfer calls to a party line.
The AMI can support two modes of operation: Day and Night Mode. The day and night modes can be
configured independently of each other.
As an example of the Day and Night modes, day mode may be configured to allow callers the ability of
paging and subsequent party line communications. The night mode may be configured to play a tone over
the paging system alerting personnel of an incoming call. In this mode, the call can be answered at any
Page/Party
Page/Party® Operation
The Page/Party® operation allows for the AMI to play messages/alarms and connect phone calls to a
Page/Party
The Page/Party
Page/Party
When the AMI is interfaced to a Page/Party
®
station.
®
system.
®
operation has the ability to generate the VLC tone during a message/alarm that gives
®
stations the information to change the volume of the message/alarm played.
®
system, the operation of the telephone interface is as
described above, and includes all page modes. The selection of a party line is hardwired in the system,
and cannot be changed by the caller or the AMI configuration.
In addition to the telephone operation described above, a user on the Page/Party
by using Party Hot Dial. When configured via the ACT tool, the AMI recognizes when a station goes offhook on the designated party line, and automatically dials the preprogrammed telephone number. When
the station goes on-hook, the call is terminated after the hang-up delay expires.
f:\standard ioms - current release\ 42004 instr. manuals\42004-404f.docx
11/13
®
system can initiate a call
Pub. 42004-404F
ODEL 10959-207 AND -208RACK-MOUNT AUDIO MESSENGER INTERFACES PAGE 4 of 20
M
Optional ADVANCE Operation
The Page/Party® operation allows for the AMI to play messages/alarms and connect phone calls to an
ADVANCE system.
When the AMI is interfaced to an ADVANCE system, the operation of the telephone interface is as
described above, and includes all page modes. The selection of a party line is hardwired in the
ADVANCE system, and cannot be changed by the caller or the AMI configuration.
Scheduled events and live pages can be played through the ADVANCE system to a specified zone group.
Zone groups are configured using the ACT tool. Configured zone groups can be assigned to individual
events, messages, or the AMI auxiliary microphone jack.
Refer to the required “Jumper Settings” section on page 11 when the AMI is used with an ADVANCE
system.
Optional Zone Operation
The optional Zone Interface Modules provide the capability for the AMI to route audio to eight
individually controlled zones. Each zone provides a 0 dBm/600-ohm output. Zones can be assigned to
zone groups via the ACT tool. A maximum of 60 zone groups may be created. Each zone group has a
unique description, and can consist of any combination of output zones. The ACT tool provides
configuration of zone groups, which can then be assigned to various events and messages. Via the remote
control function, the caller has the option of choosing the zone group destination prior to making a page.
Optional AMI Redundancy
The optional AMI Redundant Controller (ARC) provides the capability to increase system reliability by
using two AMI units, one as the primary and one as a backup. The ARC module(s) control which AMI is
active and which is backup.
During normal alarm operation, input contacts are applied simultaneously to both the active and back-up
AMIs. The ARC module(s) allow only the active generator to play the tone/speech message over the
system speakers. The backup AMI is held in standby mode to prevent audio mixing of the two AMI
tone/speech messages.
In the event of a failure of the active AMI, the backup AMI becomes active and plays its tone/speech
message over the system speakers.
f:\standard ioms - current release\ 42004 instr. manuals\42004-404f.docx
11/13
Pub. 42004-404F
ODEL 10959-207 AND -208RACK-MOUNT AUDIO MESSENGER INTERFACES PAGE 5 of 20
M
Installation
Power Disconnect. The power cord is the main power disconnect for all units.
Disjontion de l’alimentation. Le cordon d’alimentation est la disjonction d’alimentation principale tous les appareils.
Para Desconectar la Alimentación: El cable de alimentación es el medio principal de desconexión del equipo.
Netzanschluß. Wenn man das Netzkabel aus der Steckdose zieht, dann ist die Spannungszuführung zum Gerät vollkommen
unterbrochen.
CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
ATTENTION Pour réduire le risque d’incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou
de section supérieure.
PRECAUCIÓN Para aminorar la posibilidad de incendios, utilice solamente cable de telecomunicaciones de calibre 26
(sistema AWG americano) o mayor.
VORSICHT Um die Brandgefahr zu verringern, verwenden Sie bitte nur Fernmeldekabel der Stärke Nr. 26 AWG oder
höher.
Model 10959-207 and –208 Rack-Mount AMI units can be placed on a table or desk, or can be mounted
in a standard EIA 19-inch electronic equipment rack. The 10959-207/8 AMI requires 1U (1.75 inches) in
a standard 19-inch rack. Install the mounting brackets with the eight 8–32 × 3/8-inch screws provided.
Mount the AMI into the rack using the four 10–32 × ¾-inch screws provided.
If the AMI is to be placed on a table or desk, install the five stabilizing feet and use the four #4
countersunk toothed washers when attaching the top to the base. These washers help to provide good
contact between the two to ensure adequate grounding.
f:\standard ioms - current release\ 42004 instr. manuals\42004-404f.docx
11/13
Figure 2. AMI with feet for tabletop
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.