Page 1
Pub. 42004-354C
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Model 10453-501 Centra-Page Headset
Confidentiality Notice
This manual is pr ovided s olely as a n op erat ional, installation, and maintenance guide and contains sens itive
bus ines s and t echnic al infor ma tion tha t is confident i al and p roprietary to G AI-Tronics. GAI-Tronics
retains a ll intellectual pr operty and other rights in or to t he inf ormation c ontained herein, and s uch
informa tion may only be used in connection wit h the operation of you r GAI- Tronic s pr oduct or system.
This ma nual may not be disclosed in any form, in whole or in p art, dir ec tly or indirectly, to any t hird pa rty.
General Information
The GAI-Tronics Model 10453-501 Headset provides hands-free communication with Centra-Page
syst ems. The 3 0 -foot extension ca ble provides the user s with mobility when connect ed t o Centr a-Page jack
station. The cable is equipp ed with a belt c lip. A push-b utton switch is provided on the left ear cup to
allow paging ac c es s.
The GAI- Tr onic s headset provides a noise r edu c tion rating of 2 3 dB, ma king it ideal for use wher e hea ring
protection is requi red. Pl ease refer t o the a ttach ed Environmental Protection Agency (EPA) Use and Care
Sheet for information on maint aining the headset’s noise reduction rating (N RR). The goos eneck
(flexboom) microphone is fully adjustable but remains stat ionary onc e it is in pla c e. In addition, the gelfilled ear c u ps a nd adjustab le b lack clot h head strap maximize comfor t and keep t he hea dset secu rely in
place. These factors allow the use of the headset in areas with up to 110 dB SPL ambient noise, improving
safet y for employees wo rking i n these areas.
The headset is adaptable for use with or without hard hats. An employee working in diff erent a reas with
different requir ements c an alterna te the us e of the same heads et, r equ iring a reduced investment.
Operation
To operate, the GAI-Tronics 10453-501 Headset must be connected to a Centr a-Page jack using a
GAI-Tronics Model 10410-002 Extension Cable.
HEADSET REPLACEMENTS
Old Model Number New Model Number
10452-301 Headset 10453-501 Headset
10453-301 Headset (for use with a hard hat) 10453-501 Headset
10453-401 Headset 10453-501 Headset
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 800-492-1212 Fax : 610-796-5954
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
V
Page 2
Pub. 42004-354C
Model 10453-501 Centr a- P age Headset Page:
2 of 4
Specifications
Noise reduction rating.......................................................................................................................23 dB
Microphone ....................................................................Gooseneck (flexboom); dynamic, noise-canc eling,
Receiver........................................................................................................................300-ohm; dynamic
DC line current draw.........................................................................................................8 mA dc typic al
Configuration......................................................................... Adaptable for use with or without a hard hat
External controls......................................................................................................... Push-to-page switch
Cable...................................................................................................12-inch; with phono plug connector
Ear cups......................................................................................................................................Gel-filled
Temperature range (operating and storage)........................................-22° F to +140° F (-30° C to +60° C)
Temperature code..................................................................................................................................T4
Headset weight ................................................................................................................1.1 lbs. (0.51 kg)
Shipping weight.............................................................................................................2.25 lbs. (1.03 kg)
Approvals ........................ NRTL approved for use in US and Canada in the following hazardous locations:
Intrinsically safe for use in Class I, Div. I, Groups C a nd D
hazardous locations when installed in accordance with Control Drawing No. 72979 Exia
Listed for use in Class I, Div. 2, Groups C and D
hazardous locations when installed in accordance with Control Drawing No. 72979
Extra accessories packed with unit:....... One microphone muff and one pack of comfort covers for ear c ups
\\s_eng\gtc proddoc s \ s t andard iom s - current release\42004 inst r. m anuals \ 42004-354c .doc 19532P-71(08-04)
04/06
Page 3
Pub. 42004-354C
Model 10453-501 Centr a- P age Headset Page:
3 of 4
Use the R eference Designator numbers on the chart above t o f i nd the part nu mb er and desc ription on the
Replacement Parts Table on page 4.
\\s_eng\gtc proddoc s \ s t andard iom s - current release\42004 inst r. m anuals \ 42004-354c .doc 19532P-71(08-04)
04/06
Page 4
Pub. 42004-354C
Model 10453-501 Centr a- P age Headset Page:
REPLACEMENT PARTS
4 of 4
Reference
Designator
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
Part Number
Spring Assembly 12610-006
Dome, Right 12610-016
Support Assembly 12610-005
Dome, Left (mic side) 12610-017
Overhead Cord Assembly Kit 12610-004
Push-to-Talk Switch 12610-018
Nut and Washer Kit 12610-003
Communications Cord Assembly Kit 12610-022
Boom Attachment Kit 12610-015*
Flexboom Assembly 12610-007*
Microphone Plug Cor d 12610-008
Microphone 13501-001
Microphone Mu f f 12610-009
14
15
16
17
18
19
20
21
22
Dome Filter 12610-019
Receiver 12610-025
Screws (10 pack) 12610-010
Dome Filter 12610-021
Filter 12610-011
Ear Cup, Liquid or Gel Filled (pair) 12610-012
Ear Cup, Comfort Cover 12610-013
PCB Assembly 69206-001
Connector, E l ectrical 12610-024
* If item 9 or it em 10 requi re replacement, bot h pieces must b e purchas ed to ma k e the repair .
Replacement Extension Cable
Description Part Number
30-Foot Extension Cable with Belt Clip 10410-002
\\s_eng\gtc proddoc s \ s t andard iom s - current release\42004 inst r. m anuals \ 42004-354c .doc 19532P-71(08-04)
04/06
Page 5
Warranty
Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any
GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall
comply with the then-current product specifications and product literature, and if applicable, shall be fit
for the purpose specified in the agreed-upon quotation or proposal document. If (a) Seller’s goods prove
to be defective in workmanship and/or material under normal and proper usage, or unfit for the purpose
specified and agreed upon, and (b) Buyer’s claim is made within the warranty period set forth above,
Buyer may return such goods to GAI-Tronics’ nearest depot repair facility, freight prepaid, at which time
they will be repaired or replaced, at Seller’s option, without charge to Buyer. Repair or replacement shall
be Buyer’s sole and exclusive remedy. The warranty period on any repaired or replacement equipment
shall be the greater of the ninety (90) day repair warranty or one (1) year from the date the original
equipment was shipped. In no event shall GAI-Tronics warranty obligations with respect to equipment
exceed 100% of the total cost of the equipment supplied hereunder. Buyer may also be entitled to the
manufacturer’s warranty on any third-party goods supplied by GAI-Tronics hereunder. The applicability
of any such third-party warranty will be determined by GAI-Tronics.
Services. Any services GAI-Tronics provides hereunder, whether directly or through subcontractors,
shall be performed in accordance with the standard of care with which such services are normally
provided in the industry. If the services fail to meet the applicable industry standard, GAI-Tronics will
re-perform such services at no cost to buyer to correct said deficiency to Company's satisfaction provided
any and all issues are identified prior to the demobilization of the Contractor’s personnel from the work
site. Re-performance of services shall be Buyer’s sole and exclusive remedy, and in no event shall GAITronics warranty obligations with respect to services exceed 100% of the total cost of the services
provided hereunder.
Warranty Periods. Every claim by Buyer alleging a defect in the goods and/or services provided
hereunder shall be deemed waived unless such claim is made in writing within the applicable warranty
periods as set forth above. Provided, however, that if the defect complained of is latent and not
discoverable within the above warranty periods, every claim arising on account of such latent defect shall
be deemed waived unless it is made in writing within a reasonable time after such latent defect is or
should have been discovered by Buyer.
Limitations / Exclusions. The warranties herein shall not apply to, and GAI-Tronics shall not be
responsible for, any damage to the goods or failure of the services supplied hereunder, to the extent
caused by Buyer’s neglect, failure to follow operational and maintenance procedures provided with the
equipment, or the use of technicians not specifically authorized by GAI-Tronics to maintain or service the
equipment. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE IN LIEU OF AND
EXCLUDE ALL OTHER WARRANTIES AND REMEDIES, WHETHER EXPRESS OR IMPLIED BY
OPERATION OF LAW OR OTHERWISE, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Return Policy
If the equipment requires service, contact your Regional Service Center for a return authorization number
(RA#). Equipment should be shipped prepaid to GAI-Tronics with a return authorization number and a
purchase order number. If the equipment is under warranty, repairs or a replacement will be made in
accordance with the warranty policy set forth above. Please include a written explanation of all defects to
assist our technicians in their troubleshooting efforts.
Call 800-492-1212 (inside the USA) or 610-777-1374 (outside the USA) for help identifying the
Regional Service Center closest to you.
(Rev. 10/06)
Loading...