How it Works
Gainward
Loading...
RTX 3070 Phantom GS
User Manual
2 pgs533.94 Kb0

Gainward RTX 3070 Phantom GS User Manual

GAINWARD GeForce RTX 3070
Phantom
“Golden Sample”
Board: 304mm(L)x136mm(W) Cooler : 2.7 slot Bracket: 2 slot
GW GeForce RTX 3070 Phantom GS_bar code: 471056224-2201_P/N:NE63070T19P2-1040P
✓ GAINWARD’s Expertool II – the whole
new design utility adds flexible fan curve control, LED Lighting control and BIOS saving feature for powerful GeForce RTX 3070 card.
Graphics card require:
◼ PCI Express-compliant motherboard with one dual-
width x16 graphics slot
◼ Two 8-pin PCI Express supplementary power
connectors
◼ Minimum 650W or greater system power supply ◼ Microsoft® Windows® 10 64-bit, Linux 64-bit
Specifications
Process Technology
8nm
Boost
Clock
1815 MHz
CUDA Cores
5888
Max.
TGP
270W
Memory
Amount
8 GB
Memory Clock
7000 MHz
Memory Type
256b GDDR6
Memory Bandwidth
448 (GB/Sec)
Key Features
GAINWARD Unique Features
Output Support Minimum System Requirements
Dimension Accessory
*Subject to change without notice.
✓ Golden Sample
TM
Powered by GAINWARD’s unique
technology for over-clocking can provide stable operating under all kinds of gaming application.
◼ NVIDIA Ampere Architecture ◼ 2nd Gen Ray Tracing Cores ◼ 3rd Gen Tensor Cores ◼ PCI Express
®
Gen 4
◼ NVIDIA DLSS ◼ NVIDIA
®
GeForce Experience™
◼ NVIDIA G-SYNC
®
◼ Game Ready Drivers ◼ Microsoft DirectX
®
12 Ultimate
◼ Vulkan RT API, OpenGL 4.6 ◼ NVIDIA GPU Boost™ ◼ VR Ready ◼ 3* DisplayPort 1.4a, HDMI 2.1 ◼ HDCP 2.3
HDMI : (max. resolution) 7680x4320@60Hz DP *3 : (max. resolution) 7680x4320@60Hz
1. Manual
2. Power Cable
3. A-RGB Sync. Cable
GW GeForce RTX 3070 Phantom GS_bar code: 471056224-2201
*Subject to change without notice.
Extreme silent acoustics in heavy
loading mode
Extreme cool temperature in heavy
loading mode
GAINWARD GeForce RTX 3070 Phantom “GS” with
factory over-clocked runs very quiet under full load operation thanks to the new Phantom fan design.
GAINWARD GeForce RTX 3070 Phantom “GS” with
factory over-clocked speed performs extremely low GPU temperature even under heavy loading condition.
Dual BIOS
1: Performance mode
(factory setting)
2: Silence mode
GAINWARD provides two VBIOS for GeForce
RTX 3070 Phantom “GS” board. The “Performance mode” VBIOS is set on position #1 of the “dual BIOS switch”. It provides higher
performance setting of the board. Users can switch to second VBIOS on position #2
- the “Silence mode”. It provides quieter setting for the board to offer the quietest gaming experience.
GAINWARD superior hardware design
GAINWARD re-designs the entire hardware, that brings higher stability under high current operation (heavy loading operation).
DrMOS
DrMOS is designed to handle high current with low noise operation and less heat generating.
GAINWARD’s Expertool II – the whole new design utility adds flexible fan curve control, LED Lighting control and BIOS saving feature for powerful GeForce RTX 3070 card.
ARGB Lighting
Addressable RGB allows gamers to customize each LED color. You can personalize the lighting effects with Expertool Utility
ZERO RPM
The fans Keep stop rotationwhile you are experiencing the multimedia application or general workload. The fans start rotation while working on heavier loading such as gaming that the GPU temperature surpasses 60°C
2-Ball Bearing - long life span
• IP5X dust resistant
• Lower fan vibration
• Prolonged fan life expectancy
Metal Plate Kit
Two die casting molded plates fully cover the circuit board and directly attach to all the hot spots on PCB.
• Strong-as-armor protection
• Optimized heat dissipation
The special design of plates also provides best airflow for the third fan in order to achieve the best cooling efficiency.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use