Gainward RTX 2080 SUPER phantom GLH User Manual

GAINWARD GeForce RTX 2080 SUPER

Phantom

“Golden Sample- Goes Like Hell”

Board: 292mm(L)x130mm(W)
Cooler : 2.7 slot
Bracket: 2 slot

1. Driver Disc

2. Manual

3. Power cable

GW GeForce RTX 2080s Phantom GLH_bar code: 471056224-0955

© 2019 NVIDIA Corporation. All Rights Reserved. NVIDIA, the NVIDIA logo, GeForce, GeForceExperience, G-SYNC, NVIDIA
GPU Boost, and NVLink are registered trademarks and/or trademarks of NVIDIA Corporation in the United States and other
countries. All other trademarks and copyrights are the property of their respective owners.

Expertool II

✓ GAINWARD’s Expertool II – the

brand-new utility adds flexible fan
curve control and BIOS saving
feature for powerful

✓ GeForce RTX 2080 SUPER card.

HDMI : (max. resolution)
4096x2160@60Hz
DP *3 : (max. resolution)
7680x4320@60Hz
USB-C (VirtualLink)

Specifications

Process Technology

12nm

Boost

Clock

1860

MHz

CUDA Cores

3072

Max.

TGP

250W

Memory

Amount

8 GB

Memory Clock

7750

MHz

Memory Type

256b GDDR6

Memory Bandwidth

496

(GB/Sec)

Key Features

GAINWARD Unique Features

Output Support Minimum System Requirements

Dimension Accessory

*Subject to change without notice.

✓ Golden SampleTM– Goes Like Hell

Powered by GAINWARD’s unique

technology for over-clocking can
provide stable operating under all kinds
of gaming application.

Graphics card require:

◼ PCI Express-compliant motherboard with one dual-

width x16 graphics slot

◼ Two 8-pin PCI Express supplementary power

connectors

◼ Minimum 650W or greater system power supply
◼ Microsoft® Windows® 10 64-bit (November 2018 or

later), Windows ®7 64-bit, Linux 64-bit

◼ NVIDIA Turing Architecture, 12nm IC Process
◼ 16Gbps GDDR6 Memory
◼ 65T RTX-OPS
◼ Real-Time Ray Tracing
◼ Tensor Cores

◼ NVIDIA® GeForce Experience™

◼ NVIDIA Ansel
◼ NVIDIA Highlights
◼ NVIDIA G-SYNC® -Compatible
◼ Game Ready Drivers
◼ Microsoft® DirectX® 12 API, Vulkan API, OpenGL 4/5

◼ NVIDIA GPU Boost™

◼ NVIDIA NVLink™ (NVIDIA SLI®)
◼ VR Ready
◼ 3* DisplayPort 1.4, HDMI 2.0b and USB Type-C
◼ HDCP 2.2
◼ Maximum Total Board Power Include USB-C – 285W

GW GeForce RTX 2080s Phantom GLH_bar code: 471056224-0955

© 2019 NVIDIA Corporation. All Rights Reserved. NVIDIA, the NVIDIA logo, GeForce, GeForceExperience, G-SYNC, NVIDIA
GPU Boost, and NVLink are registered trademarks and/or trademarks of NVIDIA Corporation in the United States and other
countries. All other trademarks and copyrights are the property of their respective owners.

*Subject to change without notice.

Expertool II

Extreme silent acoustics in heavy loading

mode

Extreme cool temperature in heavy

loading mode

GAINWARD GeForce RTX 2080 SUPER Phantom “GLH”
with factory over-clocked runs very quiet under full load
operation thanks to the new Phantom fan design.

GAINWARD GeForce RTX 2080 Phantom SUPER “GLH”
with factory over-clocked speed performs extremely low
GPU temperature even under heavy loading condition.

GAINWARD’s Expertool II – the brand-new utility adds
flexible and individual fan curve control and VBIOS saving
feature for powerful GeForce RTX 2080 SUPER card.

Dual BIOS (1: OC, 2: Standard/Zero RPM)

GAINWARD provides two VBIOS for GeForce RTX 2080
SUPER Phantom “GLH” board.
Factory over-clocking VBIOS is set on position #1 of the

“dual BIOS switch”.

Users can switch to second VBIOS on position #2,
standard-clock setting” with “Zero RPM” fan control to
enjoy the quietest gaming experience as well as low GPU
temperature.

GAINWARD superior hardware design

GAINWARD re-designs the entire hardware, that
brings higher stability under high current operation
(heavy loading operation).

USB Type C connectivity

On board USB-C port (VirtualLink connector)

• Provide connecting to new VR device (HMD, head­mounted display)

• USB host mode support

• Supply up to 35W power

• Connect to display device (monitor with DP/USB-C port)

DrMOS

DrMOS is designed to handle high current with low
noise operation and less heat generating.

✓ LED-Lighting

GPU Loading
Indicator

✓ Advanced heat-pipes/FINs

design

✓ Back plate

✓ 10 DrMOS power for cores
✓ 2 DrMOS power for memory

✓ Copper base for GPU

✓ “Honeycomb” shape

bracket

✓ Three 10cm fans

with 6-poles
motor and new
blade design

✓ Dual BIOS switch

6-Poles Fan Motor

6-poles fan motor vs 4-poles motor (normal fan)

• Smaller hub size that increases 10% efficiency area of
the fan

• Lower power consumption - up to 30% current reduce

• Smoother spinning – lower electric noise, lower

vibration (longer lifespan)