Gainward RTX 2070 phantom User Manual

GAINWARD GeForce RTX 2070
Specifications
Process Technology
12nm
Boost Clock
1620 MHz
CUDA Cores 2304
Max. TGP 175W
Memory Amount
8 GB
Memory Clock 7000 MHz
Memory Type
256b GDDR6
Memory Bandwidth 448 (GB/Sec)
Key Features
GAINWARD Unique Features
Output Support
Minimum System Requirements
Dimension
Accessory
Phantom
NVIDIA Turing Architecture, 12nm IC Process14Gbps GDDR6 Memory42T RTX-OPSReal-Time Ray Tracing
NVIDIA® GeForce Experience™
NVIDIA AnselNVIDIA HighlightsNVIDIA G-SYNC® -CompatibleGame Ready DriversMicrosoft® DirectX® 12 API, Vulkan API, OpenGL 4/5
NVIDIA GPU Boost™
VR Ready3* DisplayPort 1.4, HDMI 2.0b and USB Type-CHDCP 2.2Maximum Total Board Power Include USB-C – 210W
Expertool II
GAINWARD’s Expertool II – the
brand-new utility adds flexible fan curve control and BIOS saving feature for powerful
GeForce RTX 2070 card.
GAINWARD superior hardware
design provides massive capability for over-clocking and stable
operating environment under all kinds of gaming application.
HDMI : (max. resolution) 4096x2160@60Hz DP *3 : (max. resolution) 7680x4320@60Hz USB-C (VirtualLink)
Board: 292mm(L)x130mm(W) Cooler : 2.7 slot
1. Driver Disc
2. Manual
Bracket: 2 slot
GW GeForce RTX 2070 Phantom_bar code: 426018336-4238
Graphics card require:
PCI Express-compliant motherboard with one dual-
width x16 graphics slot
8-pin + 6-pin PCI Express supplementary power
connectors
Minimum 550W or greater system power supplyMicrosoft® Windows® 10 64-bit (April 2018 Update or
later), Windows ®7 64-bit, Linux 64-bit
*Subject to change without notice.
GAINWARD superior hardware design
GAINWARD re-designs the entire hardware, that brings higher stability under high current operation (heavy loading operation).
Extreme silent acoustics in heavy loading
mode
GAINWARD GeForce RTX 2070 Phantom runs very quiet under full load operation thanks to the new Phantom fan design.
DrMOS
DrMOS is designed to handle high current with low noise operation and less heat generating.
Dual BIOS switch
“Honeycomb” shape
bracket
Copper base for GPU
Three 10cm fans
with 6-poles motor and new blade design
Extreme cool temperature in heavy
loading mode
GAINWARD GeForce RTX 2070 Phantom performs extremely low GPU temperature even under heavy loading condition.
Back plate
8 DrMOS power for cores 2 DrMOS power for memory
Advanced heat-pipes/FINs
design
LED-Lighting
GPU Loading Indicator
Dual BIOS (1: Normal, 2: Zero RPM)
GAINWARD provides two VBIOS for GeForce RTX 2070 Phantom board. Standard VBIOS is set on position #1 of the “dual BIOS
switch”.
Users can switch to second VBIOS on position #2, adding
“Zero RPM” fan control feature to enjoy the quietest
experience as well as low GPU temperature.
Expertool II
GAINWARD’s Expertool II – the brand-new utility adds flexible and individual fan curve control and VBIOS saving feature for powerful GeForce RTX 2070 card.
GW GeForce RTX 2070 Phantom_bar code: 426018336-4238
USB Type C connectivity
On board USB-C port (VirtualLink connector)
Provide connecting to new VR device (HMD, head­mounted display)
USB host mode support
Supply up to 35W power
Connect to display device (monitor with DP/USB-C port)
6-Poles Fan Motor
6-poles fan motor vs 4-poles motor (normal fan)
Smaller hub size that increases 10% efficiency area of the fan
Lower power consumption - up to 30% current reduce
Smoother spinning lower electric noise, lower
vibration (longer lifespan)
*Subject to change without notice.
Loading...