Gainstrong Industry GS OOLITE User Manual

深 亘强科技 GAINSTRONG

圳

Oolite-V1 wireless routing module Spec

General Description

Oolite-v1 is a highly integrated wireless routing module. It is not only a wireless module, it is a

complete route, only energized, it can work in a wireless AP module, if coupled with a network

transformer and RJ45 network port, he is one of 3 wireless routing.

Oolite-v1 power is very low, working alone, only 0.36W, very suitable for battery products, it has a

150M wireless transmission rate, up to 20 GPIOs, can be defined as input and output.

it 's de sign f or wif i hard disk, WiFi r outer , remot e moni toring, remote video, Industrial control DIY and

so on.

The module based on the single chip AR9331 which integrates an 802.11n 1x1 MAC/BB/radio with

internal PA and LNA. It supports 802.11n operations up to 72 Mbps for 20 MHz and 150 Mbps for 40 MHz

channel respectively, and IEEE 802.11b/g data rates.

Characteristics:

CPU: AR9331 400Mhz MIPS core

RAM: 64M DDR2 RAM

Flash: 16M SPI NOR Flash memory(4/8m option)

Wireless speed: up to 150Mbps

General GPIO: 20 (not including TX, RX)

High-speed UART for console support

USB: Usb 2.0 master interface, support USB hub extension

Power supply voltage: 3.3V.

Port: 2×100Mbps network interface

Antenna: the built-in PCB /IPX external antenna.

Debug: serial debugging interface has been out.

Board Power: 0.36W

Product size: 27.6 * 52.8MM

SPI interface pin out.

深 亘强科技 GAINSTRONG

圳

Pictures:

深 亘强科技 GAINSTRONG

圳

Pins Description :

Pin No. Name GPIO state(default) spec

1 GND GROUND
2 GPIO26 output I/O
3 GPIO27/SYS_LED output I/O
4 GPIO11 input I/O Reset button