How it Works
Gainspan
Loading...
GS2011MIPS
Users Manual
18 pgs963.38 Kb0

Gainspan GS2011MIPS Users Manual

GS2011MIPS
User Manual
GS2011MIPS
An IEEE 802.11b/g /n Low-Power Wireless
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
1
GS2011MIPS
This document describes a simple method for characterizing GS2011MIPS WLAN module based RF parameters, such as transmitted spectra and receiver sensitivity. It will be described step by step below that how to control and setup.
Step 1 : Extract to CDM20814_WHQL_Certified.zip, it is a USB to UART driver, then setup it.
Step 2 : Setup teraterm_utf8-4.58.exe program, this program can help to send command to module.
Step 3 : Double click UTF-8 execute file as shown below, it will occur after completing step2 install.
Figure 1
Step 4 : When implement UTF-8, selecting Serial port correctly.
Figure 2
Step 5 : After entering UTF-8, send command at. If connection is successful, it will reply ok.
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
2
GS2011MIPS
Command
Action
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,11,0,0,0,0,1,1,0,0,1,3,1
Continuous Tx Channel 1, 11Mbps
at+wtx100test=6,0,11,0,0,0,0,1,1,0,0,1,3,1
Continuous Tx Channel 6, 11Mbps
at+wtx100test=11,0,11,0,0,0,0,1,1,0,0,1,3,1
Continuous Tx Channel 11, 11Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,14,0,0,0,0,1,1,0,0,1,2,1
Continuous Tx Channel 1, 5.5Mbps
at+wtx100test=6,0,14,0,0,0,0,1,1,0,0,1,2,1
Continuous Tx Channel 6, 5.5Mbps
at+wtx100test=11,0,14,0,0,0,0,1,1,0,0,1,2,1
Continuous Tx Channel 11, 5.5Mbps
At+rfset
Transmitter off
Step 6 : Now an y legal command can be ke yed in and if UTF-8 repl y ok, the command is implemented successful like below figure.
Figure 3
802.11b, Transmitter command:
Transmitted Tx at 11Mbps
Transmitted Tx at 5.5Mbps
Transmitted Tx at 2Mbps
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
3
GS2011MIPS
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,9,0,0,0,0,1,1,0,0,1,1,1
Continuous Tx Channel 1, 2Mbps
at+wtx100test=6,0,9,0,0,0,0,1,1,0,0,1,1,1
Continuous Tx Channel 6, 2Mbps
at+wtx100test=11,0,9,0,0,0,0,1,1,0,0,1,1,1
Continuous Tx Channel 11, 2Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,18,0,0,0,0,1,1,0,0,1,0,1
Continuous Tx Channel 1, 1Mbps
at+wtx100test=6,0,18,0,0,0,0,1,1,0,0,1,0,1
Continuous Tx Channel 6, 1Mbps
at+wtx100test=11,0,18,0,0,0,0,1,1,0,0,1,0,1
Continuous Tx Channel 11, 1Mbps
At+rfset
Transmitter off
Command
Action
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,19,0,0,0,0,1,0,0,0,1,4,0
Continuous Tx Channel 1, 54Mbps
at+wtx100test=6,0,19,0,0,0,0,1,0,0,0,1,4,0
Continuous Tx Channel 6, 54Mbps
at+wtx100test=11,0,19,0,0,0,0,1,0,0,0,1,4,0
Continuous Tx Channel 11, 54Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,24,0,0,0,0,1,0,0,0,1,0,0
Continuous Tx Channel 1, 48Mbps
at+wtx100test=6,0,24,0,0,0,0,1,0,0,0,1,0,0
Continuous Tx Channel 6, 48Mbps
at+wtx100test=11,0,24,0,0,0,0,1,0,0,0,1,0,0
Continuous Tx Channel 11, 48Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,25,0,0,0,0,1,0,0,0,1,5,0
Continuous Tx Channel 1, 36Mbps
at+wtx100test=6,0,25,0,0,0,0,1,0,0,0,1,5,0
Continuous Tx Channel 6, 36Mbps
at+wtx100test=11,0,25,0,0,0,0,1,0,0,0,1,5,0
Continuous Tx Channel 11, 36Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
Transmitted Tx at 1Mbps
802.11g, Transmitter command:
Transmitted Tx at 54Mbps
Transmitted Tx at 48Mbps
Transmitted Tx at 36Mbps
Transmitted Tx at 24Mbps
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
4
GS2011MIPS
at+wtx100test=1,0,26,0,0,0,0,1,0,0,0,1,1,0
Continuous Tx Channel 1, 24Mbps
at+wtx100test=6,0,26,0,0,0,0,1,0,0,0,1,1,0
Continuous Tx Channel 6, 24Mbps
at+wtx100test=11,0,26,0,0,0,0,1,0,0,0,1,1,0
Continuous Tx Channel 11, 24Mbps
At+rfset
Transmitter off
Command
Action
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,27,0,0,0,0,1,0,0,0,1,6,0
Continuous Tx Channel 1, 18Mbps
at+wtx100test=6,0,27,0,0,0,0,1,0,0,0,1,6,0
Continuous Tx Channel 6, 18Mbps
at+wtx100test=11,0,27,0,0,0,0,1,0,0,0,1,6,0
Continuous Tx Channel 11, 18Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,27,0,0,0,0,1,0,0,0,1,2,0
Continuous Tx Channel 1, 12Mbps
at+wtx100test=6,0,27,0,0,0,0,1,0,0,0,1,2,0
Continuous Tx Channel 6, 12Mbps
at+wtx100test=11,0,27,0,0,0,0,1,0,0,0,1,2,0
Continuous Tx Channel 11, 12Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,27,0,0,0,0,1,0,0,0,1,7,0
Continuous Tx Channel 1, 9Mbps
at+wtx100test=6,0,27,0,0,0,0,1,0,0,0,1,7,0
Continuous Tx Channel 6, 9Mbps
at+wtx100test=11,0,27,0,0,0,0,1,0,0,0,1,7,0
Continuous Tx Channel 11, 9Mbps
At+rfset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,27,0,0,0,0,1,0,0,0,1,3,0
Continuous Tx Channel 1, 6Mbps
at+wtx100test=6,0,27,0,0,0,0,1,0,0,0,1,3,0
Continuous Tx Channel 6, 6Mbps
at+wtx100test=11,0,27,0,0,0,0,1,0,0,0,1,3,0
Continuous Tx Channel 11, 6Mbps
At+rfset
Transmitter off
Command
Action
at+wrfteststart
Start up internal Power Amplifier
Transmitted Tx at 18Mbps
Transmitted Tx at 12Mbps
Transmitted Tx at 9Mbps
Transmitted Tx at 6Mbps
802.11n, Transmitter command:
Transmitted Tx at MCS7
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
5
GS2011MIPS
at+wtx100test=1,0,18,0,0,0,0,1,0,0,0,1,7,2
Continuous Tx Channel 1, 72Mbps
at+wtx100test=6,0,18,0,0,0,0,1,0,0,0,1,7,2
Continuous Tx Channel 6, 72Mbps
at+wtx100test=11,0,18,0,0,0,0,1,0,0,0,1,7,2
Continuous Tx Channel 11, 72Mbps
At+reset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,20,0,0,0,0,1,0,0,0,1,6,2
Continuous Tx Channel 1, 65Mbps
at+wtx100test=6,0,20,0,0,0,0,1,0,0,0,1,6,2
Continuous Tx Channel 6, 65Mbps
at+wtx100test=11,0,20,0,0,0,0,1,0,0,0,1,6,2
Continuous Tx Channel 11, 65Mbps
At+reset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,24,0,0,0,0,1,0,0,0,1,5,2
Continuous Tx Channel 1, 57.8Mbps
at+wtx100test=6,0,24,0,0,0,0,1,0,0,0,1,5,2
Continuous Tx Channel 6, 57.8Mbps
at+wtx100test=11,0,24,0,0,0,0,1,0,0,0,1,5,2
Continuous Tx Channel 11, 57.8Mbps
At+reset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,25,0,0,0,0,1,0,0,0,1,4,2
Continuous Tx Channel 1, 43.3Mbps
at+wtx100test=6,0,25,0,0,0,0,1,0,0,0,1,4,2
Continuous Tx Channel 6, 43.3Mbps
at+wtx100test=11,0,25,0,0,0,0,1,0,0,0,1,4,2
Continuous Tx Channel 11, 43.3Mbps
At+reset
Transmitter off
Command
Action
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,27,0,0,0,0,1,0,0,0,1,3,2
Continuous Tx Channel 1, 28.9Mbps
at+wtx100test=6,0,27,0,0,0,0,1,0,0,0,1,3,2
Continuous Tx Channel 6, 28.9Mbps
at+wtx100test=11,0,27,0,0,0,0,1,0,0,0,1,3,2
Continuous Tx Channel 11, 28.9Mbps
At+reset
Transmitter off
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,27,0,0,0,0,1,0,0,0,1,2,2
Continuous Tx Channel 1, 21.7Mbps
at+wtx100test=6,0,27,0,0,0,0,1,0,0,0,1,2,2
Continuous Tx Channel 6, 21.7Mbps
at+wtx100test=11,0,27,0,0,0,0,1,0,0,0,1,2,2
Continuous Tx Channel 11, 21.7Mbps
At+reset
Transmitter off
Transmitted Tx at MCS6
Transmitted Tx at MCS5
Transmitted Tx at MCS4
Transmitted Tx at MCS3
Transmitted Tx at MCS2
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
6
Loading...
+ 12 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use