Gain Electronic Co 12CT8 User Manual

Industrial Radio Remote Controller

SAGA1-T Series
User Manual

SSAAFFEETTYY // RREELLIIAABBIILLIITTYY // UUSSEERR--FFRRIIEENNDDLLYY

Gain Electronic Co., Ltd.

www.sagaradio.com.tw

Warning and Caution

The following symbols may be found on the product or throughout the
documentation.

Symbol Description

Dangerous Voltage

Caution

Refer to Manual

Refer the user manual for additional information when product

marked with this sign.

Indicates presence of hazardous voltage. Unsafe practice could
result in severe personal injury.

Warning

Denotes a hazard. Included text gives proper procedures.
Failure to follow instructions could result in severe personal
injury and/or property damage.

Denotes a hazard. Included text gives proper procedures.Failure
to follow instructions could result in minor personal injury and/or
properly damage.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for

(3)
compliance could void the user's authority to operate the equipment.

Industry Canada Notice

Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference

and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesired

operationofthedevice.



Industry Canada Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'IndustrieCanadaapplicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le
brouillage est susceptible d'en compromettre le fonctionnement.