W S 463 710
Side view WS 463 under BS, BM, CM
Stainless steel-backed glass front
Width 24" (60 cm), Height 8 ³⁄₁₆"
(21 cm)
Installation accessories
BA 476 510
Optional handle, stainless steel
Length 17 ¹¹⁄₁₆".
400 series convection warming
drawer
WS 463
– Handleless warming drawer
– Perfect for a side-by-side
combination of 30" single oven
and 24" combi-steam oven or a
24" coffee machine.
– Bright interior lighting.
– Soft-closing system.
– Hygienic stainless steel interior
with glass bottom.
– 4 temperature levels ranging
from 100°F – 175°F.
– Keeps food and drinks warm,
also for preparing and cooking
meals.
– Net volume 1.0 cu.ft.
Cooking modes
Defrosting of meals/proofing of
yeast dough.
Preheating of small beverages.
Keeping meals warm/slow
cooking.
Warming of dishes.
Operation
Rotary knob operation.
Recessed grip at the front bottom
center of drawer.
Side view of WS 463 below BS combi-steam oven or CM coffee
machine
Features
Usable interior dimensions:
H 3 ¾" x W 18 ¹¹⁄₁₆" x D 18 ³⁄₁₆"
Volume capacity: Dinner set for 8
people including ø 9 ½" plates and
soup bowls, additional bowls and
serving dishes depending on size.
Integrated base glass plate
heating for easy cleaning.
Convection fan for even heat
distribution.
Status display, visible in the glass
front.
Base plate made of safety glass.
Max. load 33 lbs.
Planning notes
The front of the appliance extends
1 ⅞" from the cabinet front.
Always use an intermediate
shelf — at least ¾" thick — when
mounting a 400 series single
oven/combi-steam oven above the
WS 463 warming drawer.
When mounting the drawer below
the 400 series combi-steam oven,
plan a recess of at least 1 ⅜"
between the back wall and the
warming drawer to allow for the
inlet and outlet hose to be
installed appropriately.
The electric outlet can be planned
behind the appliance.
22 400 series warming drawers
Please read the installation details
regarding air openings on pages
6–7.
Rating
Total rating: 0.81 kW.
Total Amps: 10 A.
120 V / 60Hz
Connecting cable 6' with plug.
Numbers indicated
inside parenthesis ( ) = mm