Gaggenau CX492611 Product specification sheet

CX 492 611

Stainless steel frame
Black glass ceramic
Width 36" (90 cm)

Included accessories

1 Cooking sensor for temperature

regulation.

Installation accessories

In combination of several Vario
cooktops, connecting strips must
be used. Choose respective VA 420
strip from one of the below, depending
on type of installation.

VA 420 000

Connection strip for combination
with other Vario 400 series for

flush mounting.
VA 420 010

Connection strip for combination
with other Vario 400 series for

surface mounting.

Optional accessories
CA 060 600

Cooking sensor for temperature
regulation within pots.

GN 232 110

Teppan Yaki plate made of multi-ply
material, 13" x 21", GN 1/1.
For full surface induction cooktops.

GN 232 230

Teppan Yaki plate made of multi-ply
material, 13" x 14, GN 2/3.
For full surface induction cooktops.

Combinable with:

AL400791
AI442720 / AI442760
AW442720 / AW442760
AF210791

Good to know:

Wall installations require the hood to 

be as large as the cooktop(s). Island

installations require the hood to be 

larger than the cooktop(s).

Vario 400 series full surface
induction cooktop

CX 492

– One large cooking surface
– Free positioning of up to 6 items

of cookware

– All sizes and formats of cookware

can be used

– TFT touch display for an intuitive

control of all functions

– Cooking sensor function for

temperature control in pots
– Professional cooking functions
– Max. power output of up to

5,500 W for large cookware
– Precision-crafted 3 mm stainless

steel
– For surface mounting with a visible

edge or for flush mounting
– Can be combined with other Vario

400 series appliances

Cooking zones

One unique cooking surface allows 

for all sizes and formats of cookware
to be used.
Up to 6 items of cookware can be
placed simultaneously on the cooktop.

Operation

Easy to use color graphic TFT touch
display with use indications.
Electronic power control in 17
output levels.

Features

Cooking sensor function.
Professional cooking function.
Dynamic cooking function.
Teppan Yaki function.
Booster function for pots.
Booster function for pans.
Keep warm function.
Individual pot detection.
Cooking timer for each cooking
position.
Stopwatch.
Information key with use indicators.
Power management.

Home network integration for digital
services (Home Connect) wireless via
WiFi. The use of the Home Connect
functionality depends on the Home
Connect services, which are not
available in every country.
For further information please check:
home-connect.com.

Take into account the appliance weight
and additional loads.
Additional instructions for flush
mounting:
Installation is possible in countertops
made of stone, synthetics or solid
wood. Heat resistant and watertight
sealing of the cut edges must be
observed. For a suitable heat resistant
filler please consult the countertop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.

If installing several appliances in
individual cut-outs allow for a division
bar of minimum 2" (50 mm) between
the individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of flat bottom
cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
To insure that the appliance works
correctly, the cooktop must be
sufficiently ventilated either from the
rear or base of the cabinet.
Please see the installation instructions
for further detail.
Appliance can be snapped into the
countertop from above.
Appliance weight: approx. 77 lb.
(35.2 kg).

Rating

Rating: 6,240 W (208 / 220 V)
7,200 W (240 V)
Minimum fuse protection: 30 A
Electrical: 208 / 220–240 V / 60 Hz
Electrical connection:

Hardwire required, 37" cable length. 

Safety

Main switch.
Residual heat indicator.
Child lock.
Safety shut-off.
Pause function.

Planning notes

Depending on the type of installation
(surface-mounted or flush-mounted),
the specific definition of the cut-out
must be observed.
If combining several Vario 400 series
appliances, a connection strip VA
420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
The weight bearing capacity
and stability, in the case of thin
countertops in particular, must
be supported using suitable
substructures.

www.gaggenau.com/us
Revised: June 2021

Fill with silicone

Longitudinal section

Surface-mount Installation Flush-mount Installation

Cross-section

(526 )

20½"

(B)

⅛" (3)

4⅛" (105)

37" (960)

≥ 1⅜" (35)

≥ 2"
(51)

35¾"
(908)

≥ 4⅜" (110)

34¹⁵⁄16"

(887 )

±¹⁄

±2

20½" (520)

16

"

19⅜"

(492 )

35¾"
(908)

4¼" (108)

20½" (520)

⅛"

(3)

37" (960)

16

"

"

±¹⁄

16

±2

R ⅛" (R 3)

90°

≥ 1⅜" (35)

≥ 2"
(51)

A: ⅛" (3.5

≥ 4⅜" (110)

±¹⁄

16

"

34¹⁵⁄

±2

(887 )

"

±¹⁄

16

36"

±2

(914 )

-0.5

)

16

±¹⁄

19⅜"

±2

(492 )

16

"

+¹⁄

16

"

20¹¹⁄

"

+2

(

526 )

+¹⁄16"

"

16

R ³⁄

+1

(R 5 )

(A)

90°

R ⅛" (R 3)

Longitudinal section

1

/8"

(3+1)

1

/2"

(13.5)

Cross-section

⅛"

+1

(3 )

16

"

¹¹⁄
(17)

-0.5

A: ⅛" (3.5
B: Fill with silicone

)

35

34

3

/4" (908)

15

/16" ±1/16"

(887

+1

36"

(914+2)

(520)

19⅜"

(492 )

20¹¹⁄16"

1

/8"

+1

(3

)

-0.5

1

(3.5

)

/8"

1

/2"

±2

)

(13.5)

/16"

⅛"

+1

(3 )

(A)

¹¹⁄16"

(17)

16

"

±¹⁄

±2

16

"

+¹⁄

+2

Numbers indicated
inside parenthesis ( ) = mm

www.gaggenau.com/us
Revised: June 2021