MD-ASL15W / SPRING LOADED
MONITOR MOuNT
For 15″ - 27″ (38.1-68.6 cm) LCD desktop computer monitors
User Manual
Thank you for
choosing Gabor.
The Gabor MD-ASL15W mounts your 15″–27″ (38.1–68.6 cm) LCD computer monitor. It
attaches to your desk via a built-in clamp, freeing up valuable desk space and enabling
personalized monitor placement for improved safety and comfort over conventional monitor
stands. The MD-ASL15W’s arm incorporates an internal mechanical spring system, which
is safer than the gas springs found in similar products. This spring-loaded arm functions
as a counterbalance to support your monitor in any position. Multiple points of articulation
provide a full range of motion, making it easy to adjust your monitor’s height, tilt, swivel,
and roll.
2 Welcome
Overview
Mounting Arm (x1)
Shaft
Clamp
4 Overview
Locking
collar
Set screw
Clamp screws
Clamp locking
knob
VESA Mount
Mounting
socket
Cable guides
Tools Required For
Installation
• Phillips Screwdriver
Also Included
M5x12 (x8)
M5x30 (x8)
13X5.5X16.5 (x8)
S=4mm (x1)
B CA
E
D
Supplied Parts & Hardware
A (4) M4 × 12 screw
B (4) M4 × 30 screw
C 3 mm hex key
D 5 mm hex key
E (4) Spacer
F Cable clip
G (1) Shaft Cap
H User Manual
M4 Hex Key Spacer
A
B
Cable Clip/
Protective Caps
x4
x4
C
x1
D
x1
E
x4
F
x1
G
x1
(Installed in shaft)
5Overview
Product Specifications
Monitor display size:
15″–27″ (38.1–68.6 cm)
Maximum load capacity (per arm):
17 lb. (7.8 kg)
VESA standard: 75 × 75, 100 × 100
Tilt: -90°/+85°
Swivel: 180°
Roll: 360°
• Installation: Clamp fits desk edges up to
2.6″ (6.5 cm) thick
•Arm width (extended): 28.7″ (73 cm)
•Arm pivot: 180°
•Arm height adjustment
Angle: ±45°
Range: 0″–13.8″ (0–35 cm)
•Shaft height: 12.2″ (31 cm)
•Weight: 8.25 lb. (3.7 kg)
6
Specifications
90°
360°
360°
0-13.8
12.2″ (31 cm)
+/-45°
85°
(0-35 cm)
180°
Max. 16.1″ (41 cm)