Fuzhou Emax Electronic W1 User Manual
WIFI Weather Station with Clock
Model:W1
Technical Data and Features
Base station:
Perpetual Calendar Up to Year 2099
Day of week in 8 languages user selectable: English, German, Italian, French, Spanish, Dutch, Danish and Russian
Time in optional 12/24 hour format.
Automatic calibration of network time service
Barometric pressure:
— Air pressure data source network
— Pressure alternatively in hPa/mb or inHg or mmHg
Indoor humidity measurable range: 20%RH to 95%RH
Indoor temperature:
— Temperature measurement ranges:-20°C to 60°C or(-4°F to 140°F)
— Temperature alternatively in °C or °F.
Minimum/maximum display for humidity and temperature
The future weather forecast and temperature report function, weather forecast information provided by the network
Connects directly to wifi network
Power Supply:
Battery: 4 x LR06 (UM-3), 1.5 V (size AA)
Wireless Outdoor Sensor:
— Outdoor temperature measurement ranges: -40°C (-4°F) ~ 70°C (158°F)
— Outdoor measurable range: 20%RH to 95%RH
— Data transmission frequency: 433 MHz
— Wireless range: max. 60 m (open area)
— Batteries: 2 x LR06 (UM-3), 1.5 V (size AA)
— Protection class: IPX4
WIFI Weather Station with Clock
Model:W1
Base station Appearance:
Part A-Positive LCD
A1: Time A2: ALARM icon
A3: Calendar A4: Week for today
A5: Indoor Temperature A6: Indoor Humidity
A7: Week for the next second days A8: Week for the next third days
WIFI Weather Station with Clock
Model:W1
A9: Weather forecast for the next third days A10: Minimum temperature forecast for the next
third days
A11: Maximum temperature forecasts for the
next third days
A13: Maximum temperature forecasts for the
next second days
A15: Maximum temperature forecast for
tomorrow
A17: Weather forecast for tomorrow A18: Week for tomorrow
A19: Remote wireless channel A20: Outdoor Temperature
A21: Outdoor Humidity A22: Barometric pressure
A23: Weather forecast for today A24: WIFI icon
A25: Network Time icon
A12: Minimum temperature forecast for the next
second days
A14: Minimum temperature forecast for
tomorrow
A16: Weather forecast for the next second days
Part B – Back button and power
B1: “SET” button
B2: “ALARM” button
B3: “+” button
B4: “WIFI/-” button
B5:
“MEM” button
B6:
“SNZ” button
B7: Battery compartment
Part C –Wireless Outdoor Sensor:
C1: LCD display – Temperature
C2: LCD display – Humidity
C3: Transmit signal LED
C4: “°C/°F” button
C5: “TX” button
C6:
C7: Battery compartment
Channel selector switch
W1 Manual
Initial operation:
Replace Wireless Outdoor Sensor battery compartment cover ,Push the Channel selector switch in the battery
compartment of the Wireless Outdoor Sensor, set the correct channel ,Insert 2 x AA batteries observing polarity [ “+”
and “–“ marks]
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, the Wireless Outdoor
Sensor began to switch to the normal working mode, to detect the temperature and humidity in the environment .
this time, the sensor will transmit 1 wireless signals, and the interval of about 1 minutes will automatically transmit the
1 wireless signal, each transmitted 1 wireless signal emission sensor indicator will flash 1 times.
APP software for installing base station：
DOWNLOAD APP:
Hardware Requirements:
iPhone 4s (or above) enabled smart device
Software Requirements
iOS 7 (or above) or Android 4.3 (or above)
Download APP (Weather Sense)
Download IOS APP application software URL:
https://itunes.apple.com/cn/app/weathersense/id1273633929?mt=8
At
Download Android APP application software URL:
https://play.google.com/store/apps/details?id=com.emax.weahter
User registration：
After downloading the APP, open APP, the program will jump out of a registration interface, according to the
registration shown below, after registration is completed, enter the mailbox for account activation
W1 Manual
Accountlogininterface Accountregistration
interface
Base station with APP bonding
After registration and activation, login in the login interface, APP display will jump to the base station interface,
please according to the environmental needs, choose the need to connect with the base station router name, and
enter WIFI login password, jump the next interface according to NEXT
Appearance hint based on base station Icon，Open the battery compartment cover of base station，Insert 4 x AA
batteries observing polarity [ “+” and “–“ marks]，After you pass on the power supply, all the symbols on the display
screen will be displayed after about 3 seconds,
automatically enter the AP mode, and the display will display AP.
If not for the first time use, the base station began to switch to the normal working mode, to detect the
temperature, and humidity in the environment .
weather forecast information can not be obtained, and the air pressure, weather forecast and temperature prediction
have no content display. In this case, when the “WIFI” button is held down for more than 3 seconds, the base station
will automatically enter the AP mode.
After confirming the base station enters the AP mode, click "NEXT" on the APP interface, And according to the
prompt click the prompt box, will automatically jump to the system's WI-FI settings, select the WI-FI hot spot
If the base station is used for the first time, the base station will
At the same time, because the WIFI is not set up, the network
Promptmailboxaccount
activation
"LivingSmart" and confirm the completion of the connection. Click the "<Weathersen..." icon on the top left to
automatically return to the APP interface.and select the WIFI link named "LivingSmart" according to the APP
prompt.
Return to the APP interface, continue to click on "NEXT", start the base station bonding, about a few seconds
later, if the match is successful, the APP interface will pop up the prompt box matching success, at this time, hold
down “WIFI” button of the base station for more than 3 seconds, let the base station exit AP mode. At the same time
click the prompt box, will jump to the system's WI-FI settings again, select the original WI-FI hot spot, and then click
on the top left corner of the "<Weathersen..." icon to return to the APP interface.
After the APP interface is returned, APP will automatically set the location of the base station, and show the main
boundary after the success. At the same time, the base station is automatically connected with the WIFI hot spot
after the AP mode is exited. After the connection is successful, the base station will automatically obtain the time, air
W1 Manual
pressure, weather forecast and temperature prediction of the network, and display it in the display screen.
Enter the WIFI hotspot
name and password
The Base Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3
minutes and is displayed by a flashing reception RF antenna symbol “
receiver.
is searching for the signal from the outdoor sensor.
connections (details see the following WIFI connection description)
the “OUTDOOR” display area will show an animation of the RF antenna symbol, indicating the base station
Prompts the device to
enter the AP mode
Prompt for the WIFi
hotspot named
LivingSmart
” in the “OUTDOOR” display area on the
It is suggested that the
original WIFi hotspot
should be selected
At the same time the base station began to establish WIFI
Outdoor sensor transmission:
When the Base Station successfully receives signals from the wireless sensor, the temperature and humidity of the
OUTDOOR are displayed on the OUTDOOR column of the Base Station.
The base station can connect up to 3 channel wireless sensor registration, the use of multiple wireless sensor, the
wireless sensor channel can not choose the same channel at the same time (a total of 1, 2, 3 channel can choose)
Press the "+" button can switch the display of different channels of outdoor temperature and humidity, when
displaying the symbol "
", will display the channel every 5 seconds automatically switch a channel
If the Base Station failed to receive transmission from outdoor sensor (“- -”display on the LCD), press and hold “+”
button for 3 seconds to receive transmission manually. the outdoor temperature will show an animation of the RF
antenna symbol，the Base Station will re receive the wireless signal of the outdoor sensor.
Note: when the wireless sensor set up different channels, the base station "OUTDOOR" also want to switch to the
same channel.
channel of the base station
When there is no wireless sensor signal transmission on the channel, "--" will be displayed in the
Manual time setting:
Press and hold down the “SET” button for 2 seconds, the temperature is display either in °C to flash. Now use “+”
and “-” buttons to set the temperature unit in °C or °F.
Press “SET” to confirm your setting, the barometric pressure is display either in hPa/mb to flash. Now use “+” and “-”
Loading...