Fuzhou Emax Electronic EM2255 User Manual

BEGAN TO USE:

DISPLAY UNIT-FRONT VIEW

1/4. °C/°F: temperature measurement unit

2. Alert temperature

3. Cook temperature

5. temperature measurement channel
a. Increase value of the setting； choose measurement channel

b. : Enter mode set-up; confirm setting; press and hold for 3sec to power off
c. : Decrease value of the setting
d1/d2/d3. Metal Probe Connector Wire
e1/e2/e3. Silicone sleeve
f1/f2/f3. Metal probe

DISPLAY UNIT-REAR VIEW

1. Magnet

2. °C/°F button

3. Battery cover

1. Install your battery

2. Carefully plug the meat probe into the bottom socket

3. Download APP (Smart Thermo)

3.1 Connect the APP Store to search Smart Thermo with the following device
IPhone (4S and later)
iPad (3rd generation and later)
iPad mini (all generations)

3.2 Download Android APP application software URL
https://play.google.com/store/apps/details?id=com.bbq.project
Support Android 4.3 and later

4. Pairing your smart thermo

4.1open the APP software, click the icon to open the APP ( ) - > Enter Bluetooth interface
click on the search -> waiting for data reception.

4.2, button operation
<SET> key
* press [SET] key to wake up.
* press 3sec the [SET] key to enter the sleep state.
* short press [SET] key, enter alarm temperature setting state.
* short press [SET] key to exit setup.
<+> key
* short press [+] button, choose measurement channel
* short press [+] button, the alarm parameters accumulated.
* long press [+] button, alarm quickly accumulate parameters.
< - > key
* short press [-] keys, alarm parameters decrease.
* long press button, the alarm parameters rapid decline.

4.3 LED backlight
* LED display 2 colors are orange，blue

4.4, low voltage alarm
* when the battery power is low, screen displays "LO".
* send low power information to the APP, APP prompts to replace the battery and alarm.
*SMART THERMO shows "LO" about 1sec and then automatically goes to sleep.

4.5 temperature measurement range
* device measuring temperature from-30°C to 300ºC (-22°F to 572°F)
* when the temperature is lower than the minimum temperature,or does not access to the

temperature sensor displays "LL"

* when the temperature is higher than the maximum temperature, displays "HH"