Fuzhou Emax Electronic EM2245 Users Manual

EM2245Manual

WIRELESS COOKING THERMOMETER

FEATURES

 Food and cooking temperature of the wireless transmission functions.
 Food and temperature, display.
 Cooking temperature alarm functions.
 8 meat type and 5taste Level selection.
 PGM(programmable setting) selected.

°C/°F temperature display


 Backlight function.
 temperature range: -50°C ~ 300°C
 Battery: receiver unit:

transmitter unit:2 x AA /LR06

selected.

2xAA/LR03

Main Unit Appearance

Transmitter unit:

Reciever unit:

Transmitter unit operation

INITIAL OPERATION:

 Remove the battery compartment cover on the back of the Transmitter unit.
 Place 2 * AA size batteries in the compartment as indicated by the polarity symbols (+and-)

EM2245Manual

 When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will

hear a beep tone, 3 seconds later, automatically into the working mode.

 Locate the temperature sensor jack on the right side of the Transmitter.Insert the meat temperature sensor

into the jack.

TO SELECT MEAT TYPE AND TASTE LEVEL

 Press ”MEAT” button to navigate and select the desired meat types.
 Each press will change the display in the following sequence:

BEEF LAMB VEAL HAMBURGER PORK TURKEY CHICKEN FISH PGM

 Press “TASTE” button to select the doneness level (Rare, Medium Rare, Medium, Medium Well or Well Don e).

The target temperature appears on the LCD screen.

 When the meat type selection in PGM, press “∧” and “∨” button to select temperature by the

programmable setting, setting range: -50°C --- 300°C or -58°F --- 572°F.

 Begin cooking.

TEMPERATURE ALARM BY COOKING

 The cooking alerts will sound when the meat has reached the target temperature.
 In alarm mode,press any button to turn off alarm sound

AFTER COOKING

 Once cooking is finished, remove the probe using an oven mitt.
 Clean the probe with water and a mild detergent.To clean the main unit and sensor, wipe with a damp cloth

°C/°F TEMPERATURE DISPLAY

The temperature is displayed either in °C or °F. To select Fahrenheit or Celsius, In any type except for the



PGM type, press

POWER ON/OFF



The transmitting unit in the working mode, press and hold “TASTE ” button to turn off the LCD display.

 The transmitting unit in the working mode, Automatic turn off the products is not in use after About 30

minutes by

 The transmitting unit in the Shutdown mode, press and hold “TASTE ” button to turn on the LCD display.

BACKLIGHT

 Press any button to illuminate the screen for 30 seconds.

TRANSMITTER TRANSMIT RULES

 If the temperature probe the temperature remains unchanged, the transmitter every 30 seconds at a

temperature signal transmission.

 If the temperature probe the temperature change of more than 1°C, the transmitter will transmit a signal.

“∧” button allows you to switch between the individual models.