Fuzhou Emax Electronic 1503 User Manual

TX07 Manual

Features:

` Temperature measurement ranges: -20°C (-4°F) ~ 60°C (140°F)

` Temperature alternatively in ºC or ºF.

` Humidity measurable range: 20%RH ~ 95%RH

` Data transmission frequency: 433

` Wirele

` Wireless ch

` Battery:2 x

ss range: max. 60 m (open area)

annel: 1 channel

LR6 AA

Parts description:

.92MHz

Part A –LCD Display:
A1: Temperature

A2: RF icon
A3: Channel icon
A4: Humidity
A5: Low battery icon

Part B –Button & switch:

B1: ºC/ºF button

B2: TX button

B3: channel Selection switch

Part C –Appearance:

C1:
C2: Battery compartment cover
C3: Eyebolt
C4: Stand
C5: battery compartment

Signal LED

TX07 Manual

Initial operation:

` Open the battery compartment on the back of the wireless transmitter by sliding the battery cover in the

direction of the arrow.

` Insert the new batteries, type LR06, in the battery compartment. Check the polarity of the battery during

insertion. This is indicated in the battery compartment.

` Close the battery cover.

` The signal LED at the front of the outdoor sensor will briefly light up. The signal LED will then flash about

twice a minute, indicating wireless transmission.

Set the transmission channel:

` Sliding the CH switch inside the remote’s battery compartment to select Channel 1 or Channel 2 or Channel

3. The Channel number assigned will appear on the remote’s LCD screen.

°C/°F temperature display:

` The temperature is displayed either in °C or °F. Briefly pressing the “°C/°F” button inside the remote’s

battery compartment allows you to switch between the individual models.

Manual transmit signal

` Pressing the “TX” button inside the remote’s battery compartment 1 times, the wireless transmitter will

immediately transmit the 1 wireless data,

signal is sent.

The Signal LED and an RF icon on the remote will flash when a