Future Automation PS42, PS50 Installation Instructions Manual

Design Highlights

email: [e-mail] - tel: [phone] - fax: [phone]

Installation Instructions

- Unique Scissor Design

- Solid Steel Construction

- VESA Compliant Up To 400x400

- Easy One Handed Operation

- Bi-Directional 60° Swivel

PS42/PS50 - Plasma Swivel Bracket

Future Automation

Unit 4, The Orbital Centre
Cockerell Close
Gunnels Wood Road
Stevenage
Hertfordshire
SG1 2NB
United Kingdom
Tel: [phone]
Fax: [phone]
Email: [e-mail]

www.futureautomation.co.uk

Future Automation

Enterprise Park

127 Venture Drive

Dover

New Hampshire

03820

USA

Tel: [phone]

Email: [e-mail]

www.futureautomation.net

Future Sound & Vision trading as Future Automation intend to make this and all documentation as accurate as possible. However, Future
Automation makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every
possible contingency in connection with the installation or use of this product. The information contained in this document is subject
to change without prior notice or obligation of any kind. Future Automation makes no representation of warranty, expressed or implied,
regarding the information contained herein. Future Automation assumes no responsibility for accuracy, completeness or sufciency of the
information contained in this document.

Warnings:

1. Read all technical instructions fully before installation and use. It is the installer’s responsibility to
ensure that all documentation is passed on the end user and read fully before operation.

2. Follow all technical specications and instructions during installation.

3. Refer all servicing to qualied personnel. Servicing is required regularly on an annual basis, when
the apparatus is damaged in any way, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

4. For all mounted apparatus, the apparatus should be installed on solid wood, bricks, concrete or
solid wood columns and battens.

5. Always turn off power at source before putting on or taking off parts and cleaning.

6. Exceeding the weight capacity can result in serious personal injury or damage to equipment.

Issue 001

email: [e-mail] - tel: [phone] - fax: [phone] email: [e-mail] - tel: [phone] - fax: [phone]Page 1 of 2 Page 2 of 2

PS42 / PS50 - Plasma Swivel Bracket

PS42 / PS50 - Plasma Swivel Bracket

Package Contents

This pack should contain the following:

1. PS42/PS50 Wall Bracket/Scissor Arms

2. PS42/PS50 Screen Mount

(Attached to PS42/PS50)

3. VESA Bolt Pack (Not Shown)

Installation - Stage 1

1. Detach the Screen Mount from the PS42/PS50 Swivel Bracket, by removing the two retaining bolts

at the bottom of the screen mount. The screen mount will then lift upwards and hook off.

2. Place the screen face down on a at surface and attach the Screen Mount to the mount holes on

the back. Use the provided spacers if necessary. If a wider mount pattern is needed, see the VESA
conguration document supplied.

1.

2.

1. 2.

Installation - Stage 2

1. Place the PS42/PS50 Wall Bracket and Scissor Arms onto the Screen Uprights and measure the
distance from the top wall mounting holes to the top of the screen.

2. Remove the PS42/PS50 Wall Bracket and Scissor Arms from the Screen Uprights on the back of
the screen and place against the wall. Make sure the bracket is level, then mark and drill the mounting
holes.

3. Attach the PS42/PS50 Swivel Mount to the wall using suitable xings (not provided).

Installation - Stage 3

1. Make sure the bracket can be pulled and turned from the wall correctly, then hook the screen and
Screen Mount on to the Wall Bracket and Scissor Arms by aligning the two locating nubbins on the
Screen Mount with the holes in the plate on the top of the central bar. Secure the screen with the
retraining bolts removed in Stage 1.

2. If the PS42/PS50 seems too loose or too stiff, tighten or loosen the grub screws shown.

1. 2.

1. 2/3.

Sliding Collar

Grub Screw (both sides)