futura STYX-12 Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic
properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This
combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a widerange of FFF/FDM 3D printers.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supporte d by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but n ot limited to, those of title, merchant ability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade pra ctice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify qua lity and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Charpy Notched @23° C (73° F)
Mechanical
Impact strength
14 KJ/m²
ISO 179
Tensile modulus
Tensile strength
60.0 Mpa
ISO 527 -1/-2
@Yield
--Flexural modulus
---
Technical Data Sheet
Product name:
STYX-12
Version:
v3
Water absorption
---
Physical
Specific gravity
1.02 g/cc
ISO 1183
-
Melt flow rate
---
Properties
Typical value
Test Method
Test condition
Moisture absorption
---
Hardness
81
ISO 868
Shore D Hardness
Thermal
1400 Mpa
ISO 527
-
Elongation at break
>150%
ISO 527 -1/-2
0
Flexural strength
-
Print temperature
± 240 - 270° C
---
Melting termperature
± 250 ± 10° C
ISO 11357
-
Viscat softening temp.
± 105° C
ISO 868
264psi annealed
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...