futura StoneFil Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is
gravimetrically filled with 50% of powdered stone.
This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher
material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects
have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic
spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or oth erwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to b e construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Charpy Notched @23° C (73° F)
Mechanical
Impact strength
2.9 KJ/m²
ISO 179
Tensile modulus
Tensile strength
38.0 Mpa
ISO 527
@Yield 50mm/min (2 inch/min)
--Flexural modulus
---
Technical Data Sheet
Product name:
StoneFil™
Version:
v3
Water absorption
---
Physical
Specific gravity
1.7 g/cc
ISO 1183
-
Melt flow rate
94 g/10min
ISO 1133
210° C/2.16Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
---
Hardness
---
Thermal
4760 Mpa
ISO 527
-
Elongation at break
33%
ISO 527
@ Break 50mm/min (2 inch/min)
Flexural strength
-
Print temperature
± 190 - 240° C
---
Melting termperature
± 77 - 153° C
ISO 11357
-
Viscat softening temp.
± 57° C
ISO 306
VST/A/50 (50° C/h, 10N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...