futura ReForm - rTitan Technical Data Sheet

Formfutura BV CoC: 69099502 Tel: [phone]

Groenestraat 215 VAT: NL857733709B01 Email: [e-mail]

6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com

The Netherlands

ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them
into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having

to make compromises on material properties – and yet keep it affordable.

ReForm rTitan is based on exactly the same unique formulation as our TitanX filament range, but is made out of residual
extrusion waste streams which are re-compounded and homogenized into a high-end and FDM/FFF-optimized upcycled
TitanX-based filament with significantly less environmental impact.

All information supplied by or on behalf of Formfutu ra in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warrant ies of any kind, express or implied, including, but not limited to, those of tit le, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other propertie s or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.

≥ 95%

± 0.10mm

HS Code

REACH compliant

RoHS certified

Charpy Notched @23° C (73° F)

Mechanical

Impact strength

58 KJ/m²

ISO 179

Tensile modulus

Tensile strength

43.6 Mpa

ISO 527

@Yield 50mm/min (2 inch/min)

--Flexural modulus

---

Technical Data Sheet

Product name:

ReForm™ - rTitan

Version:

v3

Water absorption

---

Physical

Specific gravity

1.10 g/cc

ISO 1183

-

Melt flow rate

41 g/10min

ISO 1133

260° C/5Kg

Properties

Typical value

Test Method

Test condition

Moisture absorption

---

Hardness

---

Thermal

2030 Mpa

ISO 527

1mm/min

Elongation at break

34%

ISO 527

@ Break 50mm/min (2 inch/min)

Flexural strength

-

Print temperature

± 240 - 260° C

---

Melting termperature

± 235 ± 10° C

ISO 294

-

Viscat softening temp.

± 97° C

ISO 306

VST/A/50 (50° C/h, 10N)

39169090

Yes

Yes

Product details, certifications and compliance

2.85mm

Optical

Haze

-

-

Diameter

Tolerance

Roundness

≥ 95%

± 0.05mm

1.75mm

-

Gloss

---

Transmittance

-

-