futura MetalFil - Ancient Bronze Technical Data Sheet

Formfutura BV CoC: 69099502 Tel: [phone]

Groenestraat 215 VAT: NL857733709B01 Email: [e-mail]

6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com

The Netherlands

MetalFil - Ancient Bronze is a metal-filled PLA-based filament with approximately 80% of gravimetric bronze filling. This
incredible high filling with bronze powders enables every FDM 3D printer user to 3D print bronze objects which are almost
indistinguishable from genuine bronze casted objects.
MetalFil - Ancient Bronze is easy to print and can be printed on full metal, PEEK, and PFTE hotends and can perfectly be
printed with ≥ 0.4mm nozzles with retraction settings enabled on both direct drive extruders, as well as on Bowden style
extruders, which is a truly unique feature for a metal-filled filament. MetalFil printed objects can very easily be post­processed allowing one to create amazing bronze objects with various patina effects.

All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.

≥ 95%

± 0.10mm

HS Code

REACH compliant

RoHS certified

Charpy Notched @23° C (73° F)

Mechanical

Impact strength

11.3 KJ/m²

ISO 179

Tensile modulus

Tensile strength

19.0 Mpa

ISO 527

@Yield 50mm/min (2 inch/min)

--Flexural modulus

---

Technical Data Sheet

Product name:

MetalFil™ - Ancient Bronze

Version:

v3

Water absorption

---

Physical

Specific gravity

3.5 g/cc

ISO 1183

-

Melt flow rate

---

Properties

Typical value

Test Method

Test condition

Moisture absorption

---

Hardness

---

Thermal

3990 Mpa

ISO 527

1mm/min

Elongation at break

8%

ISO 527

@ Break 50mm/min (2 inch/min)

Flexural strength

-

Print temperature

± 190 - 220° C

---

Melting termperature

± 210 ± 10° C

ISO 294

-

Viscat softening temp.

± 65° C

ISO 306

VST/A/50 (50° C/h, 10N)

39169090

Yes

Yes

Product details, certifications and compliance

2.85mm

Optical

Haze

-

-

Diameter

Tolerance

Roundness

≥ 95%

± 0.05mm

1.75mm

-

Gloss

---

Transmittance

-

-