futura LimoSolve Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
LimoSolve HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament which doesn’t
contain any added colorants and dissolves completely in Limonene. Being soluble in Limonene in combination with similar
thermal properties to ABS make LimoSolve an outstanding supporting material for complex dual extrusion ABS prints.
When not being used as support material LimoSolve HIPS prints in an extremely bright white colour and has exactly the
same characteristics as our EasyFil HIPS filament range.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendat ions or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, t hose of title, merchant ability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Charpy Notched @23° C (73° F)
Mechanical
Impact strength
15 KJ/m²
ISO 179
Tensile modulus
Tensile strength
22 Mpa
ISO 527
Stress @ Yield 23° C
--Flexural modulus
± 2126 Mpa
-
-
Technical Data Sheet
Product name:
LimoSolve™
Version:
v3
Water absorption
<0,1%
ISO 62
Saturated at 23° C
Physical
Specific gravity
1.04 g/cc
ISO 1183
-
Melt flow rate
3.4 cm³/10min
ISO 1133
220° C/5Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
<0.1%
ISO62
Equilibrium 23° C/50% RH
Hardness
---
Thermal
1550 Mpa
ISO 527
-
Elongation at break
50% (MD)
--Flexural strength
± 51.2 Mpa
Print temperature
± 220 - 260° C
---
Melting termperature
± 180 - 260° C
ISO 294
-
Viscat softening temp.
± 89° C
ASTM D1525
B/2 (120° C/h, 50N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...