futura FlexiFil Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D
printer filament.
FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a “flexural memory”, allowing
objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a
unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to
chemicals.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice wh atsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Izod Notched @23° C (73° F)
Mechanical
Impact strength
No Break
ISO 180/1A
Tensile modulus
Tensile strength
24 Mpa
ISO 527 -1/-2
Stress @ Break
--Flexural modulus
---
Technical Data Sheet
Product name:
FlexiFil™
Version:
v3
Water absorption
± 0.69%
-
Saturated at 23° C
Physical
Specific gravity
1.14 g/cc
ISO 1183
-
Melt flow rate
39 cm³/10min
ISO 1133
230° C/2.16Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
± 0.30%
-
Equilibrium 23° C/50% RH
Hardness
45D
ISO 868
Shore D Hardness (3s)
Thermal
95 Mpa
ISO 527 -1/-2
-
Elongation at break
530%
ISO 527 -1/-2
Nominal Strain at Break, 23° C
Flexural strength
-
Print temperature
± 220 - 260° C
---
Melting termperature
± 180
ISO 11357-1/-3
10° C/min
Viscat softening temp.
± 90° C
ISO 306
VST/A/50 (50° C/h, 10N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...