futura EasyWood Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood
particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40%
gravimetrical filling with grinded wood particles make the filament absolutely warp-free.
EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the
printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
-
Mechanical
Impact strength
7.1 KJ/m²
-
Tensile modulus
Tensile strength
71 Mpa (MD)
ASTM D882
---
Flexural modulus
± 2583.9 Mpa
-
-
Technical Data Sheet
Product name:
EasyWood™
Version:
v3
Water absorption
---
Physical
Specific gravity
1.20 g/cc
ASTM D1505
-
Melt flow rate
4.5 g/10min
-
-
Properties
Typical value
Test Method
Test condition
Moisture absorption
---
Hardness
---
Thermal
1930 Mpa (MD)
ASTM D882
-
Elongation at break
171% (MD)
ASTM D882
-
Flexural strength
± 59.6 Mpa
Print temperature
± 200 - 240° C
---
Melting termperature
± 145 ± 10° C
--Viscat softening temp.
± 46° C
ISO 306
-
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...