futura EasyFil PLA Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is
optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved
filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
All information supplied by or on behalf of Formfutura in rela tion to its products, whether in the natu re of data, recommendations or otherwise, is supported by re search and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warrantie s of any kind, express or implied, including, but not limited to, th ose of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dea ling, usage, or trade pra ctice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify qua lity and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
-
Mechanical
Impact strength
7.5 KJ/m²
-
Tensile modulus
Tensile strength
110 Mpa (MD)
ASTM D882
---
Flexural modulus
± 2392.5 Mpa
-
-
Technical Data Sheet
Product name:
EasyFil™ PLA
Version:
v3
Water absorption
---
Physical
Specific gravity
1.24 g/cc
ASTM D1505
-
Melt flow rate
6.0 g/10min
-
-
Properties
Typical value
Test Method
Test condition
Moisture absorption
---
Hardness
---
Thermal
3310 Mpa (MD)
ASTM D882
-
Elongation at break
160% (MD)
ASTM D882
-
Flexural strength
± 55.2 Mpa
Print temperature
± 180 - 220° C
---
Melting termperature
± 210 ± 10° C
--Viscat softening temp.
± 60° C
ISO 306
-
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
2.1%
ASTM D1003
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
90
ASTM D1003
Gloss, 20°
Transmittance
-
-
Loading...