futura EasyFil HIPS Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly
softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.
EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat
resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts
are very light-weight and can easily be glued together with a variety of adhesives.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or u se made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Charpy Notched @23° C (73° F)
Mechanical
Impact strength
15 KJ/m²
ISO 179
Tensile modulus
Tensile strength
22 Mpa
ISO 527
Stress @ Yield 23° C
--Flexural modulus
± 2126 Mpa
-
-
Technical Data Sheet
Product name:
EasyFil™ HIPS
Version:
v3
Water absorption
<0,1%
ISO 62
Saturated at 23° C
Physical
Specific gravity
1.04 g/cc
ISO 1183
-
Melt flow rate
3.4 cm³/10min
ISO 1133
220° C/5Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
<0.1%
ISO62
Equilibrium 23° C/50% RH
Hardness
---
Thermal
1550 Mpa
ISO 527
-
Elongation at break
50% (MD)
--Flexural strength
± 51.2 Mpa
Print temperature
± 220 - 260° C
---
Melting termperature
± 180 - 260° C
ISO 294
-
Viscat softening temp.
± 89° C
ASTM D1525
B/2 (120° C/h, 50N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...