futura EasyFil ABS Technical Data Sheet

Formfutura BV CoC: 69099502 Tel: [phone]

Groenestraat 215 VAT: NL857733709B01 Email: [e-mail]

6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com

The Netherlands

EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.
EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical
features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS
filaments.

All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no lia bility and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade pra ctice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the u se of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.

≥ 95%

± 0.10mm

HS Code

REACH compliant

RoHS certified

Izod Notched @23° C (73° F)

Mechanical

Impact strength

36 KJ/m²

ISO 180/A

Tensile modulus

Tensile strength

38 Mpa

ISO 527

Stress @ Yield 23° C

--Flexural modulus

± 2250 Mpa

-

-

Technical Data Sheet

Product name:

EasyFil™ ABS

Version:

v3

Water absorption

1.03%

ISO 62

Saturated at 23° C

Physical

Specific gravity

1.03 g/cc

ISO 1183

-

Melt flow rate

5.5 cm³/10min

ISO 1133

220° C/10Kg

Properties

Typical value

Test Method

Test condition

Moisture absorption

0.21%

ISO62

Equilibrium 23° C/50% RH

Hardness

74 Mpa

ISO 2039-1

Ball Indentation Hardness

Thermal

1900 Mpa

ISO 527

-

Elongation at break

9%

ISO 527

Nominal Strean at Break, 23° C

Flexural strength

asa

Print temperature

± 220 - 270° C

---

Melting termperature

± 145 ± 10° C

ISO 294

-

Viscat softening temp.

± 103° C

ISO 306

VST/A/50 (50° C/h, 10N)

39169090

Yes

Yes

Product details, certifications and compliance

2.85mm

Optical

Haze

-

-

Diameter

Tolerance

Roundness

≥ 95%

± 0.05mm

1.75mm

-

Gloss

---

Transmittance

-

-