Page 1
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
Atlas Support is the next generation in PVA water-soluble support materials for FFF/FDM 3D printing. Atlas Support is the
result of extensive research to PVA improvement which has resulted in an unique formulation where numerous PVA grades
have been blended into one superior water soluble support material with improved thermal stability.
Atlas Support has good bonding to a wide variety of materials – such as PLA, ABS, PETG, ASA, HIPS, et cetera – and is much
less sensitive to degradation by humidity.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warra nty arising from a course of dealing, usage, or trade practice wh atsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Charpy Notched @23° C (73° F)
Mechanical
Impact strength
1.7 KJ/m²
ISO 179
Tensile modulus
Tensile strength
-----
Flexural modulus
---
Technical Data Sheet
Product name:
Atlas Support™
Version:
v3
Water absorption
---
Physical
Specific gravity
1.22 g/cc
ASTM D1505
-
Melt flow rate
2.3 g/10min
-
220° C/10Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
---
Hardness
---
Thermal
3500 Mpa
ISO 527
1mm/min
Elongation at break
---
Flexural strength
-
Print temperature
± 180 - 205° C
---
Melting termperature
± 163° C
--Viscat softening temp.
± 60,2° C
ISO 306
VST/A/50 (50° C/h, 10N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...