futura ABSpro Technical Data Sheet
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament – which has been
reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) – resulting in an incredibly strong
and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for
printing mechanical parts with high precision and fine detail and has exceptional endurance properties.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, th ose of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Izod Notched @23° C (73° F)
Mechanical
Impact strength
39 KJ/m²
ISO 180/A
Tensile modulus
Tensile strength
39.9 Mpa
ISO 527
Stress @ Yield 23° C
--Flexural modulus
± 2370 Mpa
-
-
Technical Data Sheet
Product name:
ABSpro™
Version:
v3
Water absorption
1.02%
ISO 62
Saturated at 23° C
Physical
Specific gravity
1.05 g/cc
ISO 1183
-
Melt flow rate
5.5 cm³/10min
ISO 1133
220° C/10Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
0.19%
ISO62
Equilibrium 23° C/50% RH
Hardness
77 Mpa
ISO 2039-1
Ball Indentation Hardness
Thermal
2100 Mpa
ISO 527
-
Elongation at break
11%
ISO 527
Nominal Strain at Break, 23° C
Flexural strength
± 72.7 Mpa
Print temperature
± 245 - 275° C
---
Melting termperature
± 252 ± 10° C
ISO 294
-
Viscat softening temp.
± 108° C
ISO 306
VST/A/50 (50° C/h, 10N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...