Fusion PP-AM100010, PP-AM60020, PP-AM300010, PP-AM120040, PP-AM200010 User Manual

4 (1)

POWERPLANT

AMPLIFIER MANUAL

PP-AM300010 PP-AM200010 PP-AM100010

PP-AM120040 PP-AM60020

CONTENTS

 

AMPLIFIER SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

pg 4

AMPLIFIER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

pg 5

FOUR CHANNEL AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

pg 6

TWO CHANNEL AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

pg 8

MONOBLOCK AMPLIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

pg 10

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

pg 12

RECORD YOUR PRODUCT DETAILS HERE:

MODEL NUMBER

 

DATE OF PURCHASE

AFFIX RECEIPT HERE

Version 1.0

2

3

Fusion PP-AM100010, PP-AM60020, PP-AM300010, PP-AM120040, PP-AM200010 User Manual

AMPLIFIER SPECIFICATIONS

 

PP-AM300010 (Monoblock)

PP-AM200010 (Monoblock)

Class

D-Class

D-Class

 

 

 

Max Power Rating

3000 Watts

2000 Watts

Frequency Response

20Hz - 320kHz

20Hz - 320kHz

 

 

 

Dimensions (mm)

436(L) x 278(W) x 60(H)

436(L) x 278(W) x 60(H)

 

 

 

Power Ratings

850 Watts RMS per Channel

600 Watts RMS x 1 Channel

 

@ 4 Ohms 1% THD+N

@ 4 Ohms 1% THD+N

 

1300 Watts RMS per Channel

900 Watts RMS x 1 Channel

 

@ 2 Ohms 1% THD+N

@ 2 Ohms 1% THD+N

 

1500 Watts RMS x 1 Channel

1000 Watts RMS x 1 Channel

 

@ 1 Ohms 1% THD+N

@ 1 Ohms 1% THD+N

 

 

 

 

PP-AM100010 (Monoblock)

PP-AM120040 (4 Channel)

Class

D-Class

Class AB

 

 

 

Max Power Rating

1000 Watts

1200 Watts

 

 

 

Frequency Response

20Hz - 320kHz

10Hz - 100kHz

Dimensions (mm)

386(L) x 278(W) x 60(H)

546(L) x 278(W) x 60(H)

 

 

 

Power Ratings

400 Watts RMS x 1 Channel

125 Watts RMS per Channel

 

@ 4 Ohms 1% THD+N

@ 4 Ohms 1% THD+N

 

620 Watts RMS x 1 Channel

165 Watts RMS per Channel

 

@ 2 Ohms 1% THD+N

@ 2 Ohms 1% THD+N

 

 

330 Watts RMS Bridged Channels

 

 

@ 4 Ohms 1% THD+N

 

 

 

 

PP-AM60020 (2 Channel)

Class

Class AB

 

 

Max Power Rating

600 Watts

 

 

Frequency Response

10Hz - 100kHz

 

 

Dimensions (mm)

436(L) x 278(W) x 60(H)

 

 

Power Ratings

125 Watts RMS per Channel

 

@ 4 Ohms 1% THD+N

 

190 Watts RMS per Channel

 

@ 2 Ohms 1% THD+N

 

390 Watts RMS Bridged Channels

 

@ 4 Ohms 1% THD+N

 

 

4

ACCEPTABLE AMPLIFIER LOADS

Model

4 Ohm

2 Ohm

1 Ohm

 

 

 

 

PP-AM120040

YES*1

YES*2

NO

PP-AM60020

YES*1

YES *2

NO

PP-AM300010

YES

YES

YES

 

 

 

 

PP-AM200010

YES

YES

YES

 

 

 

 

PP-AM100010

YES

YES

NO

 

 

 

 

*1 Per Channel and Bridged Channel(s), *2 Per Channel ONLY

NB : PP-AM100010 IS NOT 1 Ohm STABLE

AMPLIFIER INSTALLATION

INSTALLATION WARNING

1.Ensure the 12V lead is disconnected from the battery before you connect any new equipment.

2.Ensure the mounting location will not interfere with the gas tank, brake lines or electrical wiring.

3.Ensure the Amplifier is securely fastened to the vehicle to prevent damage in the event of an accident.

4.Ensure all wiring is protected to avoid pinching or crushing which could result in damage to the audio system.

5.Ensure the mounting location has sufficient air flow around the amplifier. If the amplifier is mounted in an enclosed space a 3” fan with ducting should be used to aid in air flow.

6.Do not mount any amplifier on a subwoofer enclosure as extended exposure to vibration may cause malfunction of the amplifier.

7.Ensure you use the recommended gauge wire/cable for all amplifier connections.

Wiring

Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit. Failure to do so could result in permanent damage to the audio system.

When wiring the FUSION amplifier ensure that the cable is protected from sharp objects and always use rubber grommets when wiring through metal panels. Ensure all terminals and connections are protected from the vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.

5

Loading...
+ 6 hidden pages