Fusion CA-ML700BT, CA-ML700, CA-ML500BT User Manual

MODEL: CA-ML700

AM/FM/MP3/WMA/SD/USB/AUX/iPod/iPhone SOURCE UNIT

USER MANUAL

MODEL: CA-ML700BT

A2DP BLUETOOTH/AM/FM/MP3/WMA/SD/USB/AUX/iPod/iPhone

SOURCE UNIT

2

CONTENTS

Precautions & Maintenance P3
Quick Start Guide P3
Dashboard Installation P4
Removal / Re-Attachment of the Face P4
Connecting the System P5
Basic Operations P7
Audio Functions P9
System Menu P9
Radio Operation P10
iPod / iPhone Operation P11
Media Playback (USB/SD) P12
Bluetooth Operation (700BT Only) P13
Additional Media Playback Options P15
Troubleshooting P17
How To Reset The Unit P17

Product Specications P18
Supported File Types P18

Licensing P19
Register Your Product P19
Warranty P20-27

WWW.FUSIONENTERTAINMENT.COM

3

PRECAUTIONS &
MAINTENANCE

GENERAL

• When cleaning the vehicle, do not get water or cleaning

uids on the unit.

• Do not attempt to open the unit chassis. There are no
user servicable parts or adjustments inside.

• This unit has been tested with all compatible authentic
iPod/iPhone models under normal expected operating
conditions, free from any pre-existing defects in either the

unit or iPod/iPhone and with unmodied software.

• No Responsibility can be taken for use of the unit other
than under normally expected operating conditions
in conjunction with fully functional and undamaged
iPod/iPhone units which have been manufactured and

authorised by Apple Inc.

• Ensure that only a genuine Apple sync iPhone/iPod

cable is used for connection to this unit.

QUICK START GUIDE

TUNER REGION SETTING

When the unit is powered up for the rst time (or the
battery is disconnected or runs at), you will need to set
your tuner region.

1. When you press the power button to turn on the unit

[OCEANIA] will be displayed on the LCD screen as the

default Tuner region.

2. Rotate the Encoder Volume Control to select an option:

OCEANIA (Australia / New Zealand), USA, EUROPE or

RUSSIA.

3. Press the Encoder Volume Control to store your
selection and exit to the Tuner mode.

If you make the wrong selection, you may not be able to

tune in to your desired stations. This setting can be easily
changed from the SYSTEM MENU — see page 9.

SELECTING THE MUSIC SOURCE

Press the source button to cycle through the following
sources (if available)

Radio > USB > SD > AUX>BT AUDIO (700BT Only)

4

REMOVAL / ATTACHING THE FACE

1. Press the Panel OPEN button.

2. Hold the left-hand side of the Face and pull forward

3. Pull the Face towards you (1) to disengage it from
the chassis (2).

DASHBOARD INSTALLATION

The following illustration shows a typical installation.
If you have any questions or require information regarding

installation kits, consult your car audio retailer.

If you are not sure how to install this unit correctly, have it

installed by a qualied installer.

5

WIRING DIAGRAM CA-ML700

CONNECTING THE SYSTEM

6

WIRING DIAGRAM CA-ML700BT

CONNECTING THE SYSTEM

7

700/BT BASIC OPERATIONS

1. OPEN

Press this button detach the control panel.

2. ENCODER VOLUME CONTROL

Rotate the encoder volume to increase and decrease the volume.

3. BAND/SEARCH

a) In Tuner mode, press this button to cycle through

Bands:
FM1, FM2, FM3, AM1 (MW1) or AM2 (MW2).

b) In Media playback mode, press to access the folder /

le search mode.

c) In iPod/iPhone playback mode, press this button to

access the iPod/iPhone search functions.

4. ENCODER VOLUME CONTROL MUTE/ENTER
FUNCTIONS

a) MUTE. Press this button to turn Mute ON or OFF

b) ENTER. In Media playback mode and Menu functions,
press this button to conrm a selection (ENTER).

5. AUDIO

Press this button to enter the Audio Menu mode.

6. DISP - DISPLAY

a) In MP3/WMA playback mode, press to display ID3

information: Track number and elapsed play Time - > File

- > Album - > Title - > Artist.

b) In iPod/iPhone playback mode, press to display Album

-> Title -> Artist

7. NUMERIC BUTTONS

a) In the Tuner mode, press the Numeric buttons to recall

the preset stations. Press and hold these buttons for 2
seconds to store stations.

b) In Media playback mode, Press the Numeric buttons to

perform the operations below:

8. SUBWOOFER – DIRECT SUBWOOFER LEVEL
CONTROL

When a subwoofer is connected; use the DSLC buttons to

adjust the subwoofer level up or down.

9. EQ

Press this button to select the preset equaliser settings:

FLAT->POP->USER->DANCE->ROCK->CLASSIC->JAZZ-

>VOCAL

7

8

10. ESC

ESC – ESCAPE. Press to quick return previous menu

or mode rather than having to cycle through all of the

options in the menu.

11. iPod/iPhone INTERNAL/EXTERNAL CONTROL

Press this button to switch between iPod/iPhone control

from either the unit or from the device itself.

12. MENU

Press to access the system menu. See Page 8 for menu
options.

13. TUNE UP/DOWN, FILE & TRACK UP/DOWN &
FAST FORWARD/BACK

a) TUNE UP/DOWN. In tuner mode, press this button

to Auto Seek to the next station or press and hold this

button to manually tune in to your desired station.
b) FILE & TRACK UP/DOWN. In USB/SD media playback

mode, press these buttons to skip a chapter, track or le.
c) FAST FORWARD/BACK. In USB/SD media playback

mode, press and hold momentarily to fast forward/rewind.

14. SOURCE BUTTON/ POWER ON OR OFF

Press the Source Button to cycle through the following

sources if available: Radio: USB: SD: AUX:BT(700BT Only)
Hold and press to power on or power off.

700BT BASIC OPERATIONS

15. ANSWER KEY (700BT Only)

In Bluetooth Handsfree mode:
a) Press this button to answer an incoming call.

b) Press & hold for 2 seconds to transfer the call from the

CA-ML700BT back to the Mobile Phone.

16. ESC/END (700BT Only)

a) ESC – ESCAPE. Press to quick return previous menu or mode
rather than having to cycle through all of the options in the menu.

b) END – In Bluetooth Handsfree mode, press to END a call or to

Reject an incoming call (before you answer).

16

15

9

NOTE

If the Subwoofer RCA output is set to “OFF”, then the SW LPF &

SWAM functions will not be displayed.

EQUALISER OPERATION

When you activate the Equaliser, the Pre-Set Equaliser settings

override your existing Bass, Midrange & Treble Settings.

Press the Equaliser button repeatedly to cycle through the

following pre-sets: FLAT->POP->USER->DANCE->ROCK­>CLASSIC->JAZZ->VOCAL

To return to the Bass & Treble settings that were in use before

the EQ was selected, please select the USER setting.

SYSTEM MENU

Press (MENU) to access the System Menu and press
again to select the item be adjusted, then rotate Encoder

Volume Knob to select a value / option. To exit this menu

at any time, press the ESC button

STORE (Auto store)

While in Tuner mode, press the ENCODER VOLUME
CONTROL to activate Auto Store. The six strongest stations

of the selected band will be saved in the preset channels
automatically

LOC* ON/OFF

(Local/Distance). Use this setting to Auto Seek to strong

local stations (Local) or all stations regardless of their

strength (Distance).

AUDIO FUNCTIONS

Audio functions are easily accessable on the ML700/700BT.

AUDIO MENU. Press the AUDIO BUTTON (button 5)

to access the Audio Menu mode. Then press ENTER
or TUNE UP to select the Audio Function to be

adjusted, then rotate the ENCODER VOLUME CONTROL
to select the desired setting. You can always return to the

previous Audio Function by pressing the TUNE DOWN

button.

REMINDER

In the AUDIO MENU, or in any menu, you can quickly exit the
menu by pressing the ESC button

EBX ON/OFF: Turn ON or OFF the EBX (Encounter Bass

Xtender) Bass Boost.

BAS (Bass) Adjust the Bass level between -7 to +7.
TRE (Treble) Adjust the Treble level between -7 to +7.
BAL (Balance) Adjust the balance between the right and left

speakers from 12R (full right) to 12L (full left).

FAD (Fader) Adjust the fader between the front and rear

speakers from 12R (full rear) to 12L (full front).

(SUBWOOFER)
SW ON/OFF Turn On or Off the Subwoofer RCA output.
SWAM ON/OFF In AM mode, turn ON or OFF the Sub

output.