Fusion CA-CD700, RV-CD800 Instruction Manual

1

MODEL: CA-CD700

AM/FM/CD/MP3/WMA/SD/ USB/iPod/iPhone R ECEIVE R

INSTRUCTION MANUAL

2

CONTENTS

Precautions & Maintenance P3
Quick Start Guide P3
Dashboard Installation P4
Removal / Re-Attachment of the Face P5
Connecting the System P6
Basic Operations P7
Audio Functions P8
System Menu P9
Radio Operation P10
RDS Operation P11
iPod / iPhone Operation P12
Media Playback (CD/USB/SD/Aux In) P13
Additional Media Playback Options P15
Troubleshooting P17
How To Reset The Unit P17
RDS Program Types & Descriptions P18
Product Specifications P18
Supported File Types P19
Licensing P19
Warranty P20-27

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

• This device may not cause harmful interference,
AND

• This device must accept any interference received,
including interference that may cause undesired
operation.

3

PRECAUTIONS &
MAINTENANCE

GENERAL

• When cleaning the vehicle, do not get water or cleaning
fluids on the unit.

• Do not attempt to open the unit chassis. There are no
user servicable parts or adjustments inside.

• This unit has been tested with all compatible authentic
iPod/iPhone models under normal expected operating
conditions, free from any pre-existing defects in either the
unit or iPod/iPhone and with unmodified or “jailbroken”
software.

• No Responsibility can be taken for use of the unit other
than under normally expected operating conditions
in conjunction with fully functional and undamaged
iPod/iPhone units which have been manufactured and
authorised by Apple Inc.

• Ensure that only a Genuine Apple Sync cable is used for
connection to this unit.

• When the vehicle’s air conditioner is in use, moisture
may accumulate on the CD Laser lens. This may cause
disc read errors. If this occurs, remove the disc and wait
for the moisture to evaporate.

QUICK START GUIDE

TUNER REGION SETTING

When the unit is powered up for the first time (or the
battery is disconnected or runs flat), you will need to set
your tuner region.

1. When you press the power button to turn on the unit
[OCEANIA] will be displayed on the LCD screen as the
default Tuner region.

2. Rotate the Encoder Volume Control to select an option:
OCEANIA (Australia / New Zealand), USA, EUROPE or
RUSSIA.

3. Press the Encoder Volume Control to store your selection
and exit to the Tuner mode.

If you make the wrong selection, you may not be able to tune
in to your desired stations. This setting can be easily changed
from the SYSTEM MENU — see page 10

SELECTING THE MUSIC SOURCE

Press the source button to cycle through the following
sources (if available) — Radio > CD > USB > SD > AUX

RGB 32K+ COLOUR SELECTION

The initial colour setting for this unit is Colour Scan. To
quickly enter the 32K+ RGB colour menu, press and hold
the ESC/RGB button

4

You can then rotate the Encoder Volume Control to select
from the following pre-set display colours:

WHITE: GREEN1: GREEN2: GREEN3: AMBER: PINK1:
PINK2: PURPLE1: PURPLE2: BLUE1: BLUE2: USER
COLOUR: ORANGE

Press the ESC/RGB button to confirm your selection.
See Page 10 for details on how to set the USER COLOUR

STORE DEMO MODE

When you connect the unit for the first time and press the
Mute/Power button the unit will operate in Demo Mode.
To exit Demo Mode , press the Mute/Power Button again.
See Page 10 to turn Demo Mode off.

DASHBOARD
INSTALLATION

The following illustration shows a typical installation.
If you have any questions or require information regarding
installation kits, consult your car audio retailer.

If you are not sure how to install this unit correctly, have it
installed by a qualified installer.

5

REMOVAL/RE-ATTACHMENT
OF THE FACE

PLEASE NOTE

• If any function does not work, open the front panel & re-close.

• Do not touch the contact pins on the rear of the face as this could
cause contact problems. If the contacts become dirty, please
clean with a soft cloth.

• Petrol and other solvents must not come in contact with the
front face

• Please use the supplied plastic case to store the front face when
it is removed from the unit.

• For security purposes, please ensure that when removed, the
face is stored out of sight if left in the vehicle.

1. Press the Panel OPEN button.

2. After flipping down the front panel, push it to the right (A), then
draw the left of the front panel outwards (B)

3. To re-attach the face, please complete the above steps in reverse.

6

WIRING DIAGRAM

CONNECTING THE SYSTEM

7

BASIC OPERATIONS

1. OPEN

Press this button to flip open and detach the control panel.

2. ENCODER VOLUME CONTROL

Rotate the encoder volume to increase and decrease the volume.

3. iPod/iPhone INTERNAL/EXTERNAL CONTROL

Press this button to switch between iPod/iPhone control
from either the unit or from the device itself.

4. ENCODER VOLUME CONTROL AUDIO/ENTER FUNCTIONS

a) AUDIO. Press this button to enter the Audio Menu mode.
b) ENTER. In Media playback mode and Menu functions,

press this button to confirm a selection (ENTER).

5. MUTE – POWER ON/OFF

a) Press this button to turn Mute ON or OFF
b) Press this button to turn the unit on. Press and hold to

turn the unit off.

6. DISP - DISPLAY

a) In MP3/WMA playback mode, press to display ID3
information: Track number and elapsed play Time - > File

- > Album - > Title - > Artist.
b) In iPod/iPhone playback mode, press to display Album

-> Title -> Artist

7. NUMERIC BUTTONS

a) In the Tuner mode, press the Numeric buttons to recall
the preset stations. Press and hold these buttons for 2
seconds to store stations.

b) In Media playback mode, Press the Numeric buttons to
perform the operations below:

8. SUBWOOFER – DIRECT SUBWOOFER LEVEL CONTROL

When a subwoofer is connected; use the DSLC buttons to
adjust the subwoofer level up or down.

9. EQ

Press this button to select the preset equaliser settings:
FLAT->POP->USER->DANCE->ROCK->CLASSIC-

>JAZZ->VOCAL

10. ESC/RGB

a) ESC – ESCAPE. Press to quick return previous menu or
mode rather than having to cycle through all of the options
in the menu.

b) RGB – 32K+ RGB COLOUR. Press and hold this button to

8

access the 32k+ variable colour setting mode. See Page 10
for more information

11. BAND/SEARCH

a) In Tuner mode, press this button to cycle through Bands:
FM1, FM2, FM3, AM1 (MW1) or AM2 (MW2).
b) In Media playback mode, press to access the folder / file

search mode.
c) In iPod/iPhone playback mode, press this button to

access the iPod/iPhone search functions.

12. MENU

Press to access the system menu. See Page 8 for menu
options.

13. TUNE UP/DOWN, FILE & TRACK UP/DOWN & FAST
FORWARD/BACK

a) TUNE UP/DOWN. In tuner mode, press this button to
Auto Seek to the next station or press and hold this button
to manually tune in to your desired station.

b) FILE & TRACK UP/DOWN. In CD or USB/SD media
playback mode, press these buttons to skip a chapter,
track or file.

c) FAST FORWARD/BACK. In USB/SD media playback
mode, press and hold momentarily to fast forward/rewind.

14. SOURCE

Press the SOURCE button to cycle through the following
sources if available: Radio: CD: USB: SD: AUX

AUDIO FUNCTIONS

All Audio functions are easily accessable on the CA-CD700.
AUDIO MENU. Press the ENCODER VOLUME CONTROL

to access the Audio Menu mode. Then press ENTER or
TUNE UP to select the Audio Function to be adjusted,
then rotate the ENCODER VOLUME CONTROL to select
the desired setting. You can always return to the previous
Audio Function by pressing the TUNE DOWN button.

REMINDER

In the AUDIO MENU, or in any menu, you can quickly exit the menu
by pressing the ESC/RGB button

QUASI-PARAMETRIC FUNCTION – CFQ ADJUSTMENT

As part of the available Audio Functions, you have the ability
to adjust the Center Frequency of the Bass, Midrange
or Treble controls. This gives you greater control of the
adjustment of these functions by allowing you to select the
preferred Center Frequency to adjust.

If you are unsure of which CFQ settings to use, please use
the following Default settings: Bass CFQ 80Hz, Midrange
CFQ 1.5K Hz & Treble CFQ 12.5K Hz

AUDIO FUNCTION ADJUSTMENT:

EBX ON/OFF: Turn ON or OFF the EBX (Encounter Bass

Xtender) Bass Boost.

BAS Adjust the Bass level between -7 to +7.
BAS CFQ Select Bass centre frequency: 60/80/100/200Hz
MID Adjust the Midrange level between -7 to +7.

9

MID CFQ Select the Midrange centre frequency: 0.5K /

1.0K / 1.5K / 2.5KHz

TRE Adjust the Treble level between -7 to +7.
TRE CFQ Select the Treble centre frequency: 10.0K /

12.5K / 15.0K / 17.5KHz
BAL (Balance) Adjust the balance between the right and left

speakers from 12R (full right) to 12L (full left).
FAD (Fader) Adjust the fader between the front and rear

speakers from 12R (full rear) to 12L (full front).

(SUBWOOFER)
SW ON/OFF Turn On or Off the Subwoofer RCA output.
SW LPF Subwoofer low pass crossover: 80/120/160Hz
SWAM ON/OFF In AM mode, turn ON or OFF the Sub output.

NOTE

If the Subwoofer RCA output is set to “OFF”, then the SW LPF &
SWAM functions will not be displayed.

EQUALISER OPERATION

When you activate the Equaliser, the Pre-Set Equaliser settings
override your existing Bass, Midrange & Treble Settings.

Press the Equaliser button repeatedly to cycle through
the following pre-sets: FLAT->POP->USER->DANCE­>ROCK->CLASSIC->JAZZ->VOCAL

To return to the Bass/Midrange/Treble settings that were in use
before the EQ was selected, please select the USER setting.

SYSTEM MENU

Press (MENU) to access the System Menu and press
again to select the item be adjusted, then rotate Encoder
Volume Knob to select a value / option. To exit this menu at
any time, press the ESC/RGB button

STORE (Auto store)

While in Tuner mode, press the ENCODER VOLUME CONTROL
to activate Auto Store. The six strongest stations of the selected
band will be saved in the preset channels automatically

RDS ON/OFF

While in Tuner mode, this selection turns On or Off RDS.
RDS Functions are explained in more detail on Page 11. If
RDS is set to OFF, then the RDS Functions indicated below
with an * will not appear in the System Menu

PTY* (Program Type)

Press the ENCODER VOLUME CONTROL to enter program
type, then rotate the ENCODER VOLUME CONTROL to
select the category.

AF* ON/OFF

Turn On or Off the Alternate Frequencies function.

TA* ON/OFF

Turn On or Off the Traffic Announcement function.

REG* ON/OFF

Turn On or Off the Set Region for Alternate Frequencies function

CT* ON/OFF

Turn On or Off the CT function.