Fusion 16994 Quick Start Manual

Warranty Information

1-YEAR LIMITED PRODUCT WARRANTY

This product is covered under a one year limited warranty.

Fusion Products Ltd. warrants to the original purchaser that

this product is free from defects in materials and workmanship

for the period of one year warranty from date of purchase.

For Technical Support and/or Warranty inquiries

please contact:

Fusion Products Ltd.

Monday to Friday

8:30-5:00 PM EST

2905 Argentia Road, Unit 2,3

Mississauga, Ontario L5N 8G6

Tel: [phone] Fax: [phone]

Email: [e-mail]

4 SOLAR PATHWAY

LIGHTS

FUSION PRODUCTS LTD.

Model No. 16994

Contents

Overview .............................................................................................................. 1

About Your Solar Light ................................................................................... 1

Getting Started ................................................................................................... 1

Important ............................................................................................................. 2

Operation ............................................................................................................. 2

Schematic Diagram ........................................................................................... 3

Parts and Hardware List ................................................................................. 3

Assembly & Installation .................................................................................. 3

Battery Replacement ...................................................................................... 4

Trouble Shooting Tips .................................................................................... 5

Care Information .............................................................................................. 5

Warranty Information .................................................................................... 6

Trouble Shooting Tips

If your solar light does not come on at dusk despite following all
instructions please try the following steps:

1. Make sure that the solar light is not affected by any other light
source.

2. Ensure the solar light does not stand in the shade all day.

3. Check to see if the batteries are installed correctly.

4. If there is a protective film on the solar panel carefully remove
this.

Care Information

1. Clean any dirt and debris from the solar panel. The panel cannot
recharge if the light is obstructed. Use a soft cloth to clean the
panel. Do not use abrasives or chemicals that might scratch or
damage the UV coating.

2. In a region where snow and ice are likely and the light assembly
is covered with snow for an extended period of time the batteries
will require a recharge for at least 8 hours.

5

Battery Replacement

STEP 1:

While holding the glass lens, turn the solar
housing in a counter clockwise direction to
remove (Figure 2).

STEP 2:

Turn the switch to the <OFF> position.

STEP 3:

Remove the battery compartment cover
(Figure 3).

STEP 5:

Replace the battery with an equivalent new
solar rechargeable battery, ensuring the
correct polarity is observed (Figure 3).

STEP 6:

Reassemble the unit by reversing the above
procedure.

STEP 7:

Allow the unit to charge for up to 2 days in
the <OFF> position. Once fully charged
turn the switch to the <ON> position and
the solar light will turn on automatically
when it becomes dark.

Caution: Rechargeable batteries contain
Nickel-Cadmium or Nickel-Metal Hydride
and must be recycled or disposed of
properly. Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable batteries. Do not dispose of
batteries in fire. Batteries may explode or leak.

Overview

This product is designed to the highest technical specifications and
standards. It will supply years of maintenance free use. Please read
these instructions thoroughly prior to installation, then store in a
safe place for future reference. If at any time you are unclear about
this product, or require further assistance please do not hesitate to
contact our trained professionals operating the customer support
line at 1-877-615-1378 Monday to Friday between the hours 8:30
AM to 5:00 PM Eastern Standard Time or email
[e-mail]

About Your Solar Light

During the day your solar panel will convert the sun's light and/or
UV rays into electrical power that will charge the rechargeable
battery. When it becomes dark, the solar light will turn on using
the power stored on the rechargeable battery as it will detect no
day light. The units light output strength and time depends on how
many hours and how much sunlight and/or UV rays your panel
absorbs throughout the day.

For maximum output place the solar panel in an area where there
is direct sunlight for at least 8 hours in a given day. Do not install
your solar light in a shaded area. The selected location should not
be near night time light sources such as; porch lights, street lights
or pool lights as these may cause the solar light to turn off
prematurely.

Getting Started

Please do not throw away any packing material until all parts are
verified as present.

4

1

Figure 2

Figure 3

Important

• Fully charge the battery before first use. Charge under direct

sunlight in the <OFF> position for 2 days.

• For best results, locate your solar lamp in a position where it

can get direct sunlight on the solar panel and generally free
from cover and shade.

• Keep your solar lights away from other night-time light

sources, such as streetlights.

• Make sure the solar panels are not covered by dust, snow

and debris. Clean it with a soft damp cloth or paper towel
periodically. Avoid the use of abrasive cleaning agents.

• Use only rechargeable batteries for your solar lights. Replace

with a new battery of the same size each year for optimum
performance.

• The performance of the solar light will vary with the time of

year. It will deliver more light when it has had a full day in
the sun rather than a day in overcast weather.

Operation

For First Time Use:

STEP 1:

Fully charge the battery before first use.
Charge under direct sunlight in the <OFF>
position for 2 days.

STEP 2:

While holding the glass lens, turn the solar
housing in a counter clockwise direction
to remove (Figure 1).

STEP 3:

For daily operation, place the ON/OFF
switch in the <ON> position under the
solar housing. Your solar light will
automatically turn on once it gets dark.

Schematic Diagram

Parts and Hardware List

PART

#

DESCRIPTION

QTY

A

SOLAR HOUSING

2

B

GLASS LENS

2

C

GROUND STAKE / BODY

2

D

GROUND SPIKE

2

Assembly & Installation

STEP 1:

Carefully insert ground spike (D) into ground in desired location.

STEP 2:

Connect ground stake/body (C) to ground spike (D).

STEP 3:

Connect glass lens (B) and solar housing assembly (A) to ground
stake/body (C).

2

3

Figure 1

A SOLAR HOUSING

B GLASS LENS

C GROUND STAKE/BODY

D GROUND SPIKE