Remote Display RD-30
HIGH-SPEED LAN NETWORK MAKING
COMPLEX INSTALLATIONS SIMPLE
Multiple NavNet Components can be connected using Ethernet.
Each unit becomes a universal display, allowing you to access any
component that is connected.
Furuno's NavNet products give you the flexibility
to use them as a single, stand-alone system or as
part of an integrated network bridge. Using the
same network technology seen in modern office
environments, the NavNet network utilizes an
Ethernet Hub, providing virtually limitless
expandability.
The current network allows you to have up to four
NavNet displays connected simultaneously . Add a
WAAS/GPS receiver antenna, a Network Sounder
and a Network Weather facsimile and you will
have a complete electronics package.
But integration doesn't stop there!
You can connect multiple radar and WAAS/GPS
antennas if needed. The NavNet network will
allow you to view any component on any of the
NavNet displays. So if you want to have multiple
displays on one bridge or individual displays
throughout the vessel, you will be able to fully
operate every component connected to the
NavNet network.
● Easily connects to NavNet display via NMEA
cable
● Optional Smart Sensor
TM
integrates a 235 kHz
depth transducer, paddlewheel and
thermosensor (0.02°F or 0.01°C resolution)
which is available in a variety of housings
● High frequency transducer is free from surface
clutter and wakes, giving excellent performance
at high speed and in shallow water
● Own ship position, speed, course, water
temperature, depth, speed and direction of
current and wind are displayed on any display
units in the network
Note: All displays require appropriate sensors or external input.
Navigational Data Organizer
Navigational Data Organizer
Remote Display RD-30
10.4" Color LCD
Radar/VideoPlotter Display
7" Silver bright LCD
Radar/VideoPlotter Display
7" Color LCD
Radar/VideoPlotter
Display
Ethernet
10/100Base-T Hub
BlackBox system
Radar/VideoPlotter
● Crystal clear 12" and 15" monitors for use as
main or remote displays
● Built-in scaler allows monitors to accept up to
SXGA (1280 x 1024) resolution
● Waterproof, low profile unit allows for flush
mount installation
● Wide range of inputs: 2 RGB analog, 1 Digital
Video Interface (DVI) and 3 NTSC/PAL
● Unique programmable video input names
• PIP function allows for displaying two images
on the screen at the same time
• Easily control display with standard infrared
remote
MULTI-PURPOSE MARINE LCD DISPLAY
MULTI-PURPOSE MARINE LCD DISPLAY
Models MU-120C/155C
Models MU-120C/155C
12", 15" Sun Light Viewable
12", 15" Sun Light Viewable