Page 1
LED HDTV19"
Model : FEHS1 9E6A
USER’S MANUAL
Page 2
Warning
To prev ent fir e and/o r elect ric sho ck, do no t use thi s plug wi th an ext ensio n
cor d, rece ptacl e or othe r outle t unles s the bla des can b e fully i nsert ed to
pre vent bl ade exp osure . Do not ex pose th is appl iance t o rain or m oistu re.
Important Safety Instructions
Rea d these i nstru ction s.
Kee p these i nstru ction s.
Hee d all war nings .
Fol low all i nstru ction s.
Ple ase, un plug th e TV po wer cor d when th e follo wing co nditi ons occ ur:
-Wh en ther e is a thun derst orm (Pl ease, p ull out t he powe r cord an d anten na).
-Wh en clea ning th e TV se t.
-Wh en the TV s et is no t used f or a lon g time .
Do no t use cor rosiv e depur ative w hen cle aning t he TV set .
Do no t put the T V set un der di rect s unli ght or n ear he at.
Do no t put a hea t sourc e, such a s a candl e or heat er, on top o f or near t he TV set .
Lea ve plen ty of spa ce (at le ast 10c m) arou nd the TV s et for v enti lati on.
Pla ce the TV s et awa y from w here i t can be r uine d by rai n or wat er (su ch as ne ar a
win dow).
Don 't put a co ntain er with l iquid ( such as a v ase) on t op of the T V set.
Do no t move th e TV se t when th e power i s on.
Do no t touch , push or s cratc h the sur face of t he TV set w ith ha rd mat eria ls or it ems.
Whe n TV su rface s are dir ty, plea se use a w et cot ton cl oth or s oft cl oth wi th non cor rosiv e clean ers to cl ean it ca reful ly. Don´ t use ac eton e, tol uene o r alco hol to
cle an the TV s et.
Be awa re and care ful of moi sture, w hich can da mage inn er elect ronic co mponen ts.
Whe n con densed m oistu re is pre sent, t he TV scr een ma y appe ar blu rry or s pott y.
It is r ecomm ended t hat a tec hnici an inst all the T V set on a w all, i f such p lace ment i s
des ired.
An in corre ct wall i nstal latio n will be u nsafe a nd haza rdous .
Do not le t childr en climb o n or pla y aro und the TV set to avo id falls, col lissio ns,
dam ages and in jurie s.
Do no t hit the T V pane l with h ard ob ject s to pre vent d amag es.
Do no t cover t he TV set w ith bl anke ts or ot her ob ject s when i t is con nect ed to a
pow er sour ce to pre vent ov erhea ting an d fire.
Batte ries shall not be expo sed to excess ive heat such as sunshi ne, fire or the like.
Mai ns plug i s used as d iscon nect de vice fr om the ma ins, th e disco nnect
dev ice sha ll rema in read ily ope rate.
App aratu s with cl ass I con struc tion sh all be co nnect ed to a mai ns sock et
out let wit h a prote ctive e arthi ng conn ectio n.
Safety Information
AVIS RISQUE DE CHOC ELEC TRIOUE/NE PAS OUVRIR
Page 3
Important Safety PrecautionsImportant Safety Precautions
Do not pl ace the po wer cor d or other ca bles
acr oss a walk way i n cas e it is tr ampl ed on . Do
not ove rloa d th e p ower cord or powe r so cket .
Whe n the pow er plug i s used to d iscon nect an d
con nect th e devi ce, it s houl d easi ly into t he
pow er sour ce.
Do no t place t he LED TV o n an uns tabl e
sur face.
Do no t disa ssemble the b ack cov er, as it
con tains h igh vol tages i nside a nd will c ause
ele ctric shoc k. On ly qu alif ied p rofe ssio nals
sh ou ld co nd uc t in te rn al a dj us tme nt s,
mai ntena nce, an d check s.
The TV s et sh ould not b e su bjec ted t o
wat er d ropl ets, vap or, o r sp lash . This
equ ipmen t shoul d not be pl aced on o bject s
fil led wit h l iquid s. Do not p lace f lame
sou rces, such a s lit ca ndle s, on or n ear th e
LED TV. Pl ease , pull ou t the pow er plug
and cont act after s ales support if ther e are
abn ormal o bject s or wate r in the TV.
Pul l ou t t he powe r co rd a nd ante nna cabl e
dur ing ele ctric al stor ms so the L ED TV is no t
dam aged b y elec tric al sur ges. K eep al l
peo ple a way from the ante nna c able duri ng
ele ctric al stor ms.
Ple ase, im media tely pu ll out th e AC po wer
plu g from ad apter i f there i s an abno rmal
sou nd or sme ll or the L ED TV has s ound
but n o pictu re, and c ontac t after s ales
sup port.
The L ED TV sho uld be k ept fr ee fro m rain ,
moi sture a nd dust t o preve nt elec trica l
sho ck and sh ort cir cuits . Do not co ver the
ven tilat ion ope nings w ith tab le clot hes,
cur tains , newsp apers , etc.
The L ED TV sho uld be k ept fr om hig h
tem perat ure heat ing sour ces or d irec t
sun light . Go od v entil ation is req uire d.
All ow 10 cm. bet ween th e LED TV and
oth er appl iance s or buil t-in ca binet w alls.
Whe n yo u wi pe t he f ront cab inet , pl ease
mak e su re the powe r p lug is pull ed o ut a nd
use a soft , dry, lint -fre e c loth and ha ndle it
wit h car e. Do not r epea tedl y wip e the pane l,
nor s crape , tap or st rike th e panel w ith a har d
obj ect.
Do n ot wip e the L ED TV wi th any p etro l,
che mical o r alcoh ol base d solve nts as it
wil l lead t o prod uct da mage o f the pa nel
and c abine t.
Page 4
1
Table of Contents
2
Troubleshooting
18
Introduction
Features
Specifications
2
3
Accessories
General Description
Overview of front and side panel
Overview of back panel
Overview of remote control
Installing Batteries in the Remote Control
4
4-7
4
5
6
7
External Connection
Connecting VCR
Connecting DVD Player/Set-Top Box via HDMI
Connecting PC
10
11
8
PICTURE
AUDIO
14
13
OSD Menu Operations
BASIC OPERATION
13
13
Picture defects and the reason
19
8
Supporting signals
12
TIM E
CHA NNEL
14
15
W arnings
Features
Introduction
Input terminals used for external equipment connection
One computer VGA/PC inpu t
One AV input
l TV adopts TFT LED display screen
l HDTV Compatible( 480p,720p, 1080i, 1080p)
l Support American TV Standard 8VSB/Free 64/256QAM,NTSC System, ATSC System
l Connect to computer directly to realize TV/monitor combo.
l Zero X radiation complies to green environment protection requirement
l Advanced Chroma Processing
l Closed captioning/PARENTAL LOCK
l SAP/STEREO/MONO; ATSC.
l HDMI input
l USB input (for factory use only)
One ANTENNA jack
One PC Audio input
One HDMI input
One USB for factory use only
SET UP
15
LOC K
16
One L/R output
One Earphone output
Connecting DVD Player/Set-Top Box
9
One Component input
Connecting Amplifier/DVD Home Theater
12
Page 5
3
4
Please make sure the following items are included with your LED TV. If any items are
missing, contact your dealer.
Accessories
Remote Control &
Batteries (AAAx 2)
Adapter
Power Cord
Owner’s
Instructions
SPEAKER
REMOTE CONTROL SENSOR
Aim the remote control towards this
spot on the TV.
POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
Toggles between all the available input
CH+/ Press to change channels.
In the on-screen menu, use the CH +/ buttons as up/down arrow buttons.
VOL+/ Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/ buttons as left/right arrow buttons.
POWER
Press POWER button to toggle between
and standby mode.normal
MENU
Press to see an on-screen menu of your
TV's features.
SOU RCE
4 5
6
7
8
sources ( TV, AV, Component, HDMI,
PC)
Fine digital control
NTSC3.58
75W (Unbalance)
32 W
Color active matrix LED display
NTSC System, ATSC System
Antenna: 2~69; Cable: 1~135 (Analog: 1-125,
Digital: 1-135)
Note:
Introduction
W arnings
Specifications
DC 3V (Two AAA size batteries)
o
0C-40C
o
Design and specification modification maybe made at any time without
prior notice; all data and dimensions are approximations.
Power supply
1366X768
FEH S19E6 A
Model
DC 12V 4A
2 x 5 W
General Description
Overview of front and side panel
18.0 x 1.7 x 12.3 inch
POWER
SOURC E
MENU
CH-
CH+
VOL-
VOL+
Warranty card
Screws for wall mounting
Page 6
5
6
General Description
Overview of back panel
Overview of remote control
General Description
1. POWER ( ) input
2. HDMI in put
3.
4. PC AUDIO
5.
DC 12V
input
input
input
VGA
VIDEO
6. RF inpu t
output
8. YP bPr i nput
. USB For fa ctor y use on ly
10. output
7. EARPH ONE
9
L/R
POWE R: Turn t he TV on or of f.
MUTE : Press t o mute th e sound , Press a gain to r egain
the s ound.
0-9 : Press 0- 9 to sele t a TV chan nel dir ectly T he chan nel
wil l chang e after 2 s econd s. Appli cable f or ente ring pa ge
num ber in te letex t mode an d so on.
-/-- : Press t his but ton fir stly wh en the ch annel t o be
sel ected i s two or thr ee figu res (on ly DVD mo de).
RET URN: Re turn to th e previ ousl y viewe d progr am.
P.MODE : Selec t the pic ture mo de.
S.MO DE: Sel ect the s ound mo de.
SOU RCE: Pre ss to sel ect sig nal sou rce for T V.
VOL+ /-: Pre ss thes e two but tons to i ncrea se/de creas e the
sou nd volu me.
CH+ /-: Pres s these t wo butt ons to ch ange ch annel s
seq uentl y.
▲▼ ◀▶/ente r: Allow s you to na vigat e the on- scree n
menu s and adj ust the s ystem s ettin gs to you r
pref erenc e.
EXIT: Ex it from t he menu o r sub men u.
MEN U: Allo w you to na vigat e the on- scree n menus .
EPG: P ress to d ispla y EPG (El ectro nic Pro gram Gu ide) in
form ation .
INFO : Displ ays the c hanne l in form ation .
ZOOM : Press t o chang e the scr een sca le.
MTS: P ress to s elect t he audi o chann els.
LOCK : Press t o displ ay the pa renta l menu.
TIME : Press t o displ ay Time me nu.
FRE EZE: Pre ss to fre eze the s creen .
CC: P ress to di spla y the clo sed cap tion.
LIST: Pr ess to di splay t he TV pro gram li st.
FAV: Pres s to disp lay the f avori te prog rams.
ADD : Add thi s progr am to the fa vori te lang uage.
ERA SE: Del ete thi s progr am from th e favor ite cha nnels
lis t.
FAV+/- : Press t his but ton +/- t he favo rite pr ogram l ist.
SLEE P: Set up t he time h ow long t he TV wil l turn of f.
2
3
4
7
5
1
HDMI
IN
VGA
IN
RF
IN
PC
AUDIO
IN
EARPH ONE
OUT
6
VIDEO
L
R
IN
8
10
9
USB
Y
Pb
Pr
IN
L
R
OUT
(Facto ry use on ly)
Page 7
7
8
Installing Batteries in the Remote Control
Installing BatteriesInstalling Batteries
1
Open the battery compartment
cover on the back side.
2
Insert two 1.5V AAA size batteries in
correct polarity. Don´t mix old or used
batteries with new ones.
3
Closed the cover.
Point the remote towards the remote
control sensor of the wireless TV and
use it within 7 meters.
Put the used batteries into the recycling bin since it can negatively affect
the environment.
General Description
Battery
Cover
2xsize AAA 1.5V
Battery
Cover
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Antennas with 300 ohm flat twins Leads
Antennas with 75 ohm Round Leads
External Connection
The batteries shall not be eposed to ecessive heat such as sunshine
fire of the like.
External Connection
Connecting VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable
system.
VCR Rear Panel
Video Cable (Not supplied)
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
We recommend the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN
terminal on the TV.
4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN
jack on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and
AUDIO R jacks on the TV.
If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to
the right and left audio input jacks of the TV. If your VCR is stereo, you must connect
two cables.
HDMI
IN
VGA
IN
RF
IN
PC
AUDIO
IN
EARPHO NE
OUT
VIDEOLR
IN
USB
Y
Pb
Pr
IN
L
R
OUT
(Facto ry use on ly)
Page 8
External Connection
and the AUDIO OUT jacks on the DVD player.
the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.
Connecting DVD Player/Set-Top Box
T he rear panel jacks on your TV make it easy to connect a DVD to your TV.
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr
(Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio
cable to COMPONENT IN also.
Each DVD player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite Core.
1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on
2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the ATV
Component Cable (Not supplied)
DVD Player/Set-Top Box
9
10
Audio Cable (Not supplied)
External Connection
Connecting DVD Player/Set-Top Box via HDMI
This connection can only be made if there is a HDMI Output connector on the external
device.
What is HDMI?
HDMI, or high-definition multimedia interface, is a next-generation interface that enables
the transmission of digital audio and video signals using a single cable without
compression.
Multimedia interface is a more accurate name for it especially because it allows multiple
channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi-channel digital audio.
Each DVD player/STB has a different back panel configuration.
We recommend the use of cables with a Ferrite Core.
1. Connect an HDMI Cable between the HDMI connector on the TV and the
HDMI connector on the DVD player/Set-Top Box.
HDMI Cable (Not supplied)
DVD Player/Set-Top Box
HDMI
IN
VGA
IN
RF
IN
PC
AUDIO
IN
EARPHON E
OUT
VIDEOLR
IN
USB
Y
Pb
Pr
IN
L
R
OUT
HDMI
IN
VGA
IN
RF
IN
PC
AUDIO
IN
EARPHON E
OUT
VIDEOLR
IN
USB
Y
Pb
Pr
IN
L
R
OUT
(Factory u se only )
(Factory u se only )
Page 9
11
12
Connecting PC
Each PC has a different back panel configuration.
The HDMI jacks do not support PC connection.
We recommend the use of cables with a Ferrite Core.
1. Connect a D-Sub Cable between RGB/PC IN connector on the TV and the PC output
connector on your computer.
TV Rear Panel
D-Sub Cable (Not supplied)
PC
External Connection
2.Plug PHONE out connector into PHONE out jack on the TV the TV speaker will
be muted.
3. Connect the PC audio input jacks on the TV
Input
Mode
Air
Cable
8VSB
Free 64/256QAM
CVBS
NTSC 3.58
Supporting signals
Earphone Out
Component
VGA/PC
480p/60Hz
720p/60Hz
1080i/60Hz
HDMI
640x480/60Hz
800x600/60Hz
1024x768/60Hz
480p/60Hz
720p/60Hz
1080i/60Hz
1360x768/60Hz
480i/60Hz480i/60Hz
HDMI
IN
VGA
IN
RF
IN
PC
AUDIO
IN
EARPHON E
OUT
VIDEOLR
IN
USB
Y
Pb
Pr
IN
L
R
OUT
(Factory u se only )
Digital Audio System
Audio Cable (Not supplied)
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite Core.
1. Connect Audio Cables between the AUDIO L and R OUT on the TV and AUDIO IN [R AUDIO-L]on the Amplifier.
When an audio amplifier is connected to the AV OUT [R-AUDIO-L] terminals: Decrease
the gain (volume) of the TV, and adjust the volume level with the Amplifier's volume
Connecting Amplifier/DVD Home Theater
HDMI
IN
VGA
IN
RF
IN
PC
AUDIO
IN
EARPHO NE
OUT
VIDEOLR
IN
USB
Y
Pb
Pr
IN
L
R
OUT
(Factor y use onl y)
External Connection
can’t control.
Page 10
13
14
Adjust the OS D Scr een
OSD Menu Operations
L
Picture
Pictu re Mode S tanda rd
Color M ode Nor mal
Zoom Mo de Norm al
3DNR We ak
DLC On
PIC TURE ME NU
Pre ss MENU to d ispla y the mai n menu, a nd pres s ◄ /► to sele ct the Pi cture M enu.
Hig hligh t the item a nd pres s ▼/▲ to sele ct corre spond ing sub -menu .
Pic ture Mo de: Dyn amic/ Standa rd/So ft/ Pers onal.
Col or mode :This i tem can a djust th e satur ation of t he colo r based o n your ow n like.
Zoo m mode: Fo ur sele ctabl e Zoom Mo des, No rmal, Zo om, Cin ema, Wi de .
3DN R: Use d for th e noise red ucti on ad just ment t o get a b ette r imag e eff ects .
DLC : Dyna mic br igh tnes s control
Press MENU button to display the main menu.
Press◄ / ► button to select PICTURE in the main menu, it will highlight the first option.
AUD IO MENU
Pre ss MENU to d ispla y the mai n menu, a nd pres s ◄ /► to sele ct the So und Men u.
Equ alizer S tanda rd: Adj ust audi o frequ ency ba nd.
Aud io Lang uage: S et the la nguage .
Sur round S ound: S urroun d effect o n or off.
Aud io Only : Audio O nly effe ct on or of f.
AVC: W hen set t he AVC on, q uick vol ume cha nge wil l be smoo thed.
L
Audio
Equal izer Pe rsona l
Audio L angua ge Engl ish
Surro und Off
Audio O nly Off
AVC Off
PICTU RE
AUDIO
Press MENU button to display the main menu.
Press◄ / ► button to select AUDIO in the main menu, it will highlight the first option.
Adjust the OS D Scr een
OSD Menu Operations
Pre ss SOUR CE butt on to dis play th e input s ource l ist.
Pre ss ▼/▲ butt on to sel ect the i nput so urce yo u want
to wa tch.
Pre ss ENTE R butto n to ente r the inp ut sour ce.
INPUT
AV
HDMI
PC
ENTER
TV
BASIC O PERATION
L
Chan nel
Air/C able Ca ble
Auto Sc an
Favor ite
Show/ Hide
Chann el No.
Chann el Labe l
DTV Sig nal Bad
Auto Scan
Digital channel only
Analog channel only
MENU
ENTER
Scan all channels
Press MENU button to display the main menu.
Press◄ / ► button to select CHANNEL in the main menu, it will highlight the first option.
Air /Cabl e
pre ss ENTE R butto n to sele ct it Cab le or Air.
AUTO S CAN
Aut o Tuni ng can fi nd out al l effect ive cha nnel au tomati cally.
Pre ss ▼/▲ to sele ct Auto Tu ning, t hen pre ss ENTE R to start
aut o search ing.
If yo u want to st op searc hing , press EX IT.
CHANN EL
Component
Page 11
15
16
OSD Menu Operations
LOCK
Press MENU button to display the main menu.
Press◄ / ► button to select LOCK in the main menu, it will highlight the first option.
L
Lock
Paren tal Con trols ___
Pre ss MENU b utton to d ispla y the main m enu.
Pre ss but ton to sel ect Loc k in the ma in menu . It will h ighli ght the f irst opt ion.
Ent er the cod e 0000 to e nter th e parent al menu ( see the p ictur e below) ,
or pr ess MEN U to cance l.
◄ / ►
L
Lock
Chang e Passw ord
Syste m Lock On
Input B lock
US
Canad a
RRT Set ting
Reset R RT
CHA NGE PASSW ORD
Press ENTE R button and enter a new 4 digit passwo rd.
SYST EM LOCK
Pre ss ENTE R to selec t the sys tem lock o n or off.
Unrat ed Lock O ff
UNR ATED L OCK
Pre ss ENTE R to selec t the Unr ated loc k on or off.
Enter Old Password
Clear Cancel
Enter New Password
Confirm Password
OSD Menu Operations
TIME
Press MENU button to display the main menu.
Press◄ / ► button to select TIME in the main menu, it will highlight the first option.
L
Time
Sleep T imer Of f
Time Zo ne Atlan tic
DST Off
Time Fo rmat 24 -hour
Auto Sy nc On
Clock 2 012/1 /1 12:0
WakeU p 2012/ 1/1 12: 0
TIM E MENU
Pre ss MENU to d ispla y the mai n menu, a nd pres s ◄ /►
Sle ep Time r: Sele ct the ti me in min utes( 5min, 10min ,15mi n,30mi n,60m in,90 min,1 20min ,
180 min,2 40min ,Perso nal) th at you wan t the TV to s hut off a utomat icall y after yo u set the
tim e. Canc el by sett ing it to O ff.
Tim e Zone: S et to choo se the ti me belt .
Tim e Format : Set to ch oose ti me disp lay form at
Aut o Sync: Sy nchro nous au tomati c
Clo ck:Pr ess ENT ER to set ti me.
Wake Up : Endin g the sta te of slee p
to se lect th e Time Me nu.
SETUP
L
Setup
Menu La nguag e Engli sh
Transp arenc y 25%
Close d Capti on
Resto re Defa ult
Setup W izard
Blue Sc reen Of f
Press MENU button to display the main menu.
Press◄ / ► button to select SETUP in the main menu, it will highlight the first option.
SET UPMEN U
Pre ss MENU to d ispla y the mai n menu , an d press ◄/► to se lect th e Seput M emu.
Men u Langu age: Se t the OSD d isplay l angua ge. (En glish / Frenc h/ Span ish)
Trans paren cy: Set t ranspa rency o f OSD.
Clo sed Cap tion: S et to hid e the capt ion
Rest ore Defa ult: Re call th e defaul t settin g.
Set up Wizar d: Inst allati on guid e.
Blu e Scree n: Set the b ackgr ound co lor to bl ue or bla ck when n o input s ignal .
Page 12
8
MUTE
Troubleshooting
18
17
CAN ADA
Press ENTE R or right arrow for to enter to CANADA ratings men u, which cont ains two sub-menus:
Can ada Eng lish an d Canad a Frenc h. See nex t page fo r more det ails.
Adjust the OS D Scr een
OSD Menu Operations
US
Pre ss ENTE R or right a rrow fo r to enter t o US ratin gs menu , which c ontain s two sub -menu s:
Mov ie Rati ng and TV R ating. S ee next p age for mo re deta ils.
INP UT BLOC K
HDM I PC)
pre ss◄/►
Pre ss ENTE R to displ ay the In put Blo ck , AVPre ss ▼ / ▲ butto n to sele ct (TV、 、
Com ponen t、 、
but ton to sel ect “Un Block ” or “Blo ck”.
MENU
ENTER
US
TV
MPAA
Block
TV RATING
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ALL
ALL
ALL
ALL
ALL
ALL
FV
V S L D
VVSSLLD
MENU
MPAA
G
PG
PG-13
R
N/A
NC-17
X Lock
MENU
Canada Eng
C
MENU
ENTER
Canada
Canada Eng
Canada Fre
MENU
Canada Fre
G
C8+
G
PG
14+
18+
EXEMPT
Lock
8 ans+
13 ans+
16 ans+
18 ans+
EXEMPT
Lock
Page 13
Picture defects and the reason
19
Loading...