Furrion FEHD19S0N, FEFD22S0D, FEHD24S0D Instruction Manual

Download

Page 1

FEHD19S0N

FEFD22S0D

FEHD24S0D

Page 2

Welcome

Thank you and congratulations for purchasing this Furrion® LED HD TV. Before placing your new appliance into operation, please read these operating instructions carefully. This instruction manual contains important information for safe use, installation and maintenance of the appliance.

Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury to persons. Pass it onto possible new owners of the appliance.

The manufacturer does not accept responsibility for any damages that may arise due to nonobservation of these instructions.

If you have any further questions regarding our products, please contact us at support@furrion.com

Page 3

Contents

Welcome

.....................................................................................................1 Contents

.....................................................................................................2

Safety Warnings .........................................................................................3

Important Safety Instructions

.............................................................................................................3

Safety Precautions

...................................................................................................................................5

Function Overview ....................................................................................7

Control Panel

.............................................................................................................................................

7 Rear Panel

...............................................................................................................................................

....8

Remote Control

........................................................................................................................................9

About Your LED HD TV

...............................................................................11

Features

...............................................................................................................................................

........11

Power Source

............................................................................................................................................1

Page 4

Before Operation

.......................................................................................12

What’s in the Box

.....................................................................................................................................12

Preparation of your Remote Control

................................................................................................12

Getting Started

..........................................................................................13

Change Settings ........................................................................................15

Picture Menu

.............................................................................................................................................

15 Sound menu

..............................................................................................................................................

16 Channel menu

..........................................................................................................................................17

Feature menu

............................................................................................................................................1

8 Setup menu

...............................................................................................................................................

USB Operation

...........................................................................................23

Page 5

DVD

Operation...........................................................................................27

DVD Player Setup

.....................................................................................................................................27

DVD Player Controls

................................................................................................................................28

Loading a Disc

...........................................................................................................................................2

9 DVD/VCD/SVCD Playback

.....................................................................................................................29

Video/Audio/Picture Playback

............................................................................................................29

Trouble Shooting .......................................................................................31

Specifi cations

.............................................................................................32

Page 6

Safety Warnings

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This ‘bolt of lightning’ indicates

uninsulated material within your unit may cause an electrical shock. For the

safety of everyone in your household, please do

not remove product covering.

The ‘exclamation mark’ calls attention

to features for which you should read the enclosed literature closely to

prevent operating and maintenance problems.

WARNING: To reduce the risk of fi re or electric shock, this apparatus should not be exposed to rain or moisture and objects fi lled with liquids, such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, fully insert

the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot.)

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.

Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.

9. Protect the power cord from being walked on

or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specifi ed

by the manufacturer.

11. Use only with a cart, stand, tripod, bracket, or

table specifi ed by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms

or when unused for long periods of time.

13. Refer all servicing to qualifi ed service

personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. Apparatus should not be exposed to dripping

or splashing, and objects fi lled with liquids, such as vases, should not be placed on the apparatus.

15. An outside antenna system should not be

located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. Do not overload wall outlets, extension cords,

or integral convenience receptacles as this can result in a risk of fi re or electric shock.

Page 7

Safety Warnings

17. Never push objects of any kind into this

product through openings as they may touch dangerous voltage points or short-out parts that could result in a fi re or electric shock. Never spill liquid of any kind on the product.

18. When replacement parts are required, be

sure the service technician uses replacement parts specifi ed by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fi re, electric shock or other hazards.

19. Upon completion of any service or repairs to

this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

20. When you connect the product to other

equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock

and serious personal injury. Read the owner’s

manual of the other equipment carefully and follow the instructions when making any connections.

21. Sudden high volume sound may cause

hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage.

22. Do not allow the product to output distorted

sound for an extended period of time. It may cause speaker overheating and fi re.

23. The socket-outlet must be installed near the

unit and easily accessible.

24. The mains plug is used as the disconnect and

shall remain readily operable.

CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly.

When this happens, unit’s performance will

be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.

HOW TO HANDLE THE LCD PANEL

● Do not press hard or jolt the LCD panel. It

may cause the LCD panel glass to break and injury may occur.

● If the LCD panel is broken, make absolutely

sure that you do not touch the liquid in the panel. This may cause skin infl ammation. If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Possible Adverse Eff ects on LCD Panel: If a fi xed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images:

● Fixed Images, such as stock tickers, video

game patterns, TV station logos, and websites.

● Special Formats that do not use the entire

screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a wide screen (16:9) display (black bars on left and right sides of screen).

Page 8

Safety Warnings

The following symptoms are not signs of

malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms.

● LCD Panels are manufactured using an

extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

● Do not install the LCD Panel near electronic

equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference.

● Eff ect on infrared devices – There may be

interference while using infrared devices such as infrared cordless headphones.

Warning: To reduce the risk of fi re or electric

shock, do not expose this apparatus to rain or moisture.

Caution: Never remove the back cover of the LED

television as this can expose you to very high voltages and other hazards. If the television does not operate properly, unplug the LED television

and call your authorized dealer or service center. Adjust only those controls that are covered in the instructions, as improper changes or modifi cations not expressly approved by Furrion could

void the user’s warranty.

– Only using furniture that can safely support

the television set.

– Ensuring the television set is not

overhanging the edge of the supporting furniture.

– Not placing the television set on tall

furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

– Not placing the television set on cloth or

other materials that may be located between the television set and supporting furniture.

– Educating children about the dangers of

climbing on furniture to reach the television

set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space around the entire unit.

Safety Precautions

WARNING: Never place a television set in an

unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

– Using cabinets or stands recommended by

the manufacturer of the television set.

Notes when mounting the LED TV on the wall

If the unit is to be mounted on the wall, contact the retailer where you purchased the LED TV for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LED TV.

Page 9

Safety Warnings

VESA MOUNTING PATTERN

TV Model

Width

Height

Screw Size

Quantity

FEHD19S0N

100

PM4*8mm

FEFD22S0D

100

PM4*8mm

FEHD24S0D

100

PM4*8mm

Please refer to the table below to ensure the

correct size VESA mount is used with the TV

Notice for TV Cabinet

If the unit is to be mounted on a cabinet smaller

than length of the unit, it could result in an unstable location and the unit may tumble over, making a risk of personal, possibly fatal injury. Also, this would damage the product seriously. Accordingly, Furrion accepts no responsibility or liability for any injuries or property damage resulting from the improper installation.

WARNING:

● Do not use this TV with wall mounts that

allow the TV to tilt vertically. Vertical tilting wall mounts may cause structural damage to the TV.

● Use ONLY fi xed or horizontal swiveling wall

mounts with this TV.

Page 10

Function Overview

Control Panel

Ejects DVD/ CD Press to directly enter the channel search mode

Press to start or pause the playback

VOL+

Press to increase the volume

VOL-

Press to decrease the volume

CH+

Press to skip to the next channel

CH-

Press to skip to the previous channel

Press to enter the main menu

SOURCE

Press to select the input source

POWER

Press to switch the TV on/off

4 5 6

2 4 5

6 8 9

Control Panel

* Please note that the button layout of the

controls may vary from model to model.

Page 11

Function Overview

EARPHONE OUT

Connects to 3-conductor (TRS) phone connector of earphone, compatibility of earphone with 4-conductor (TRRS) phone connector is not guaranteed

COAXIAL

Connects to the COAXIAL AUDIO IN port of an audio device.

VIDEO IN

Connects to the COMPOSITE VIDEO/ AUDIO OUT ports of a DVD

Player, Cable Box or other compatible device

AUDIO IN

USB IN

USB Port, view pictures/movies/text and listen to MP3s via a compatible USB stick

HDMI 2 ARC

Connects to the HDMI OUT port of a DVD Player, Games Console, Cable Box or other HDMI device. ARC Audio Return Channel When connected with a HDMI 1.4 cable to an ARC compatible audio system, the TV links with the device to give extra audio functionality Please see page13

HDMI 1

Connects to the HDMI OUT port of a DVD Player, Games Console, Cable Box or other HDMI device. CEC Consumer Electronics Control When connected to the CEC compatible Furrion Entertainment Systems or other CEC Compatible devices, the TV links with the system to give extra functionality. Please see page13.

HDMI 3 VGA IN +PC AUDIO IN

Connects to the VGA OUT port of a PC to use the TV as a monitor. Connects to the AUDIO OUT port of a PC.

RF IN

Connects to the ANTENNA, CABLE, or CABLE BOX

AUDIO OUT L/R

Connects to the AUDIO IN ports of an audio device

Page 12

Function Overview

YPbPr

Connect to the COMPONENT VIDEO OUT ports of a DVD Player, Cable Box

or other compatible device

Rear Panel

Page 13

Function Overview

* The confi guration of the connection ports may

vary from model to model.

Page 14

Function Overview

No.

Button

Function

Switches to TV mode

TV/

FIREPLACE

Selects Furrion Fireplace remote control functions. * Please refer to your Furrion Fireplace manual for more information.

Press to turn the TV/Entertainment System on/off

NUMBER

BUTTONS

Enters numbers or select channels

Toggles between single & double digit input

REPEAT

Press to change the playing mode

DVD SETUP

DVD menu setup

T.SHIFT

Press to pause current DTV program and start recording

TV/RADIO

Press to switch between DTV and radio programs

EPG

Pres to display EPG information

SOURCE

Cycles through input sources

NAVIGATION

BUTTONS

Confi rms selections

VOL+/-

Increases/decreases volume

/ AUTO

TUNE

Ejects DVD/ CD Press to directly enter the channel search mode

/ HOLD

During playback, press to select the previous track/chapter. Press to hold On/Off the current page display in Teletext mode

/ STEP

REVEAL

Press to forward frame by frame during DVD/ VCD playback. Dial or accept a call (when the system is connected to a cell phone)

Page 15

Function Overview

DVD/USB

Selects TDVD/USB

AM/FM

Selects AM/FM/WB Radio

SLEEP/

CLOCK

Sets the sleep timer

Page 16

Function Overview

Remote Control

Page 17

Function Overview

Page 18

Function Overview

Page 19

No.

Button Function

NICAM /

AUDIO

Cycles through NICAM sound modes

RDM / P.LIST

Toggles random playback mode on & off Press to display the recorded segment

SEARCH /

GOTO

Jumps to a specifi c time on a DVD/ VCD/MP3/WMA or CD

S.MODE

Select the diff erent sound mode directly

P.MODE

Select the diff erent picture mode directly

SEL

Toggles between Volume, Bass, Treble & Balance; Hours & Minutes for adjusting

LOC*/SLOW

Toggles radio reception strength. Presses to start slow motion playback.

ST#/ANGLE

Toggles Stereo & Mono sound/ switches viewing angles on compatible media.

Toggles the so und mode Cinema, Rock, Classic & Flat

DISPLAY

Toggles on screen on the selected source On & Off

ASPECT

Cycles through available display aspect ratios

PBC/TITLE

Uses to start the programmed playback function

A-B/TTX

Press to start the A-B repeat function (playback loop of a segment of track) Press to turn the Teletext On/Off

No.

Button

Function

/ APS

SIZE

Press to scan radio stations: A brief press searches through each stored station. Press & hold to scan and store the 6 strongest stations. End or reject a call (when the system is connected to a cell phone)

Press to start or pause the playback

/ S.PAGE

During playback, press to select the next track/ chapter. Display a sub-page of upper options

/ INDEX

Stops playback Press to return to the index/initial page

CH+/-

Channel Up/Down

Toggles audio On or Off

EXIT

Exits the current menu

FAV

Press to add the channel to favorite list

C.LIST

Displays the channel list

Enters the main menu

REC / AUTO

Press to record the program immediately Automatically adjusts the picture in PC mode

PROG

Uses to start the programmed playback function

ZOOM

Press to enlarge screen images

Page 20

SUBT

Select subtitle language (DVD)

FREEZE

To freeze current picture

Selects AV Mode

AUX/ARC

Selects AUX/ ARC Mode

Toggles between the current and previous channel

STEREO

Switches to Stereo mode

Page 21

About Your LED HD TV

Features

Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen

for hearing impaired viewers. Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control

adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.

Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up

to 240 minutes to turn off automatically.

On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on-

screen programming.

HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component

can be connected to this unit.

Power Source

NOTE:

● Please make sure to insert the cord securely at both the LED TV and the wall outlet.

WARNING:

● DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED 12V

CIGARETTE ADAPTER. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

● DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE

FIRE, ELECTRICAL SHOCK, OR DAMAGE.

CAUTION:

● WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF

SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.

● DO NOT PLUG/UNPLUG THE 12V CIGARETTE ADAPTER (INCLUDED) OR AC/DC POWER ADAPTER

(EXCLUDED) WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL SHOCK.

● IF YOU NEED TO REPLACE THE SUPPLIED 12V CIGARETTE ADAPTER OR AC/DC POWER ADAPTER

(EXCLUDED), THE SPECIFIED ONE IS RECOMMENDED. CONTACT THE DEALER THAT YOU PURCHASED THE UNIT FROM.

Page 22

Before Operation

What’s in the Box

Thanks for purchasing this Furrion LED HD TV. This manual will help you set up and begin using your TV. Please read this manual thoroughly and keep this manual in a safe place for future reference.

First, check the contents of your box with the

parts checklist below:

● LED HD TV

● 12V Cigarette Adapter

● Unimote

● AAA Battery × 2

● Instruction Manual ● Warranty Card

● Wall-mount Screws

● Bottom Mount Stand

● 240V Power Adapter ● YPbPr Adapter

Now you can get started!

Preparation of your Remote

Control

BATTERY INSTALLATION

1. Open battery compartment cover.

2. Install two AAA batteries.

3. Close the cover of the battery compartment.

NOTE: Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or diff erent types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

● Use only the size and type of batteries specifi

ed.

● Be sure to follow the correct polarity when

installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

● Do not mix diff erent types of batteries

together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

● If the device is not to be used for a long

period of time, remove the batteries to prevent damage or injury from possible battery leakage.

● Do not try to recharge batteries not intended

to be recharged; they can overheat and

rupture. (Follow battery manufacturer’s

directions.)

● Please use caution when inserting batteries

to avoid battery damage. If the spring

Page 23

terminal in the remote control remains in contact with a side of a damaged battery it

batteries as they can become very hot and are dangerous.

can cause a short circuit. Never use damaged

Page 24

to previous page or press REPEAT button

Page 25

(green button) to skip to next page.

Page 26

Auto Installation

Setup 4

Auto Power Off:

Hours 2 Hour

Hours

Off

Move

Enter

Exit

Hours can be chosen for a

continuous viewing, and after

that the TV will be powered off.

“off” means the viewing is

timeless.

Use

Auto Installation

Setup 5

Auto Search

DTV

ATV

All

Move

Enter

Exit

Getting Started

6. Use or key to select the screen auto

shut off time, then press OK to confi rm your selection. Or press MENU or DVD SETUP (red button) on the remote control to return to previous page or press REPEAT button (green button) to skip to next page, select your desired auto power off setting, then press OK to confi rm your selection and skip to the next setting.

key to select ATV, DTV or both

channel search mode, then press OK to confi rm your selection. Or press MENU or DVD SETUP (red button) on the remote control to return to previous page. select , then press OK to confi rm your selection and skip to the next setting.

Page 27

8. The TV will start to search channels under current selected mode. Or press EXIT on the remote control to exit channel scan.

Page 28

Change Settings

Picture

Picture Mode

Press to show the list, then use or to select Dynamic, Standard, Mild or User. * You can press P.MODE button on the remote control to change the picture mode directly.

Brightness

Use or to adjust the visual perception output of the entire picture. (*Only adjustable under User mode).

Contrast

Use or to adjust the highlight intensity of the picture. (*Only adjustable under User mode)

Sharpness

Use or to adjust the peaking in the detail of the picture. (*Only adjustable under User mode)

Colour

Use or to adjust the color. (*Only adjustable under User mode)

Tint

Press or to adjust the tint ( NTSC mode only)

Colour Temperature

Change the overall color cast of the picture. Use or to select Warm, Cool or Standard.

Aspect Ratio

Press to show the list, then use or to select AUTO, 4:3, 16:9, Full, Zoom1, Zoom2 or Cinema

button to display the main menu.

key to highlight

Page 29

Change Settings

Noise Reduction

Press key to show the list, then use or to select Off , Low, Middle or High

button to display the main menu.

key to highlight

Picture Menu

Page 30

Change Settings

Treble

Balance

Surround

AVL

Sound

Channel

Feature

Setup

SPDIF

Audio Description

Sound Mode

Bass

Standard

50 0 50

Off

Auto

ENTER

Sound

Picture

Enter

Move

Exit

Retum

button to display the main menu.

key to highlight

Sound menu

1. Press MENU

2. Use or Sound mode,

then press or OK to enter the Sound menu settings.

3. Use or key to highlight the option you

want to reset.

4. Press to show the list of the selected menu,

then use or key to highlight your desired setting.

Page 31

Change Settings

button to display the main menu.

key to highlight

5. Press , OK or MENU button to confi rm your selection.

6. Press or MENU button to return to the previous menu or press EXIT at any time to exit the

setting.

Page 32

Change Settings

Channel

Del

Press RED button to sign the channels you want to delete, it will hint you when you exit.

Channel Management

Press OK or key to enter the Channel

Management page

Lock

User must set the “Lock enable”(Feature-Lock- Lock enable) at ON to active this function. Press GREEN button to sign(lock) or cancel(unlock) the channel. And you have to enter the password to view the program.

and manage the channels saved.

Skip

Press YELLOW button to Skip the channel or cancel the setting, and the program will not be programed by CH+- button.

Swap

Press BLUE button to sign the channel, press or key to

move. Press OK or to swap the position.

Favorite Management

Press OK or key to add or remove favorite channels by the color buttons. Up to 4 favorite lists are available,RED-Fav1, GREEN-Fav2, YELLOW-Fav3, BLUE-Fav4.

Country

Press OK or key to select the Country.

All

Use or key to select All mode. Press OK or to enter All search channels according DTV and ATV.

Auto Search

Press OK or key

DTV

Use or key to select DTV mode. Press OK or to enter Auto search channels for DTV.

to enter the auto Search menu.

ATV

Use or key to select ATV mode. Press OK or to enter Auto search channels for ATV.

NOTE: When the TV is auto running, you could press MENU button to stop auto tunning and return to preview menu.

button to display the main menu.

key to highlight

Channel menu

1. Press MENU

2. Use or Channel mode,

then press or OK to enter the Channel menu settings.

Page 33

Change Settings

DTV Manual Search

Press OK or key to enter the auto search channels for DTV .

Press or key to select the Channel, Frequency(KHz) or

BandWidth(MHz). Press OK or key to confi rm your selection. Use or key to select Start mode. Use OK or key to enter Start.

When the TV is auto running, you could press MENU button to stop

auto tunning and return to preview menu.

Country

Auto Search

DTV Manual Search

ATV Manual Search

Sound

Channel

Feature

Setup

Channel Management

Favorite Management

ENTER

Australia

ENTER

Channel

Picture

Enter

Move

Exit

Retum

button to display the main menu.

key to highlight

3. Use or key to highlight the option you

want to reset.

4. Press to show the list of the selected menu,

then use or key to highlight your desired setting.

5. Press , OK or MENU button to confi rm your

selection.

6. Press or MENU button to return to the

previous menu or press EXIT at any time to exit the setting.

Page 34

Change Settings

Feature

Lock: This menu allows you to

lock certain features of the

television so that can not be

used or viewed. For example

if you don’t want certain

Lock

Channel

Use or key to turn On/Off the Lock function. Press OK or button to confi rm your selection Note: When it is be turned on, the functions of Parental Guidance and Change Pin code below will be locked, and the functions Lock(in Channel Management), Auto Search, DTV Manual

Search, ATV manual Search in Channel menu will also be locked.

Lock

channels viewed by children

or if the television is to be

used in a hotel and you want

Parental

Guidance

Use or key to select the Parental Guidance mode, No Block or Block All the function.(*Only adjustable under have signal condition)

Feature menu

1. Press MENU button to display the main menu. Feature

2. Use or key to highlight Feature mode,

then press or OK to enter the Feature menu Lock ENTER settings. Picture LanguageClock ENTER

3. Use or key to highlight the option you Sound Sleep Timer ENTEROff

want to reset. Channel Auto Power Off Off

4. Press to show the list of the selected menu, Hearing Impaired Off

then press or key to scroll among list. Feature PVR/TimeshiftHDMI Link ENTERENTER

5. Press , OK or MENU button to confi rm your Setup

selection. Move Ok Enter Exit Exit Menu Retum

Page 35

Change Settings

certain channels be locked.

When you enter the system

lock menu you will be asked

for a password. As default it

Change

Pin Code

Use or key to enter fi rst enter the current code then enter your new code and confi rm your new code. (*Only adjustable under Lock Channel mode is On condition)

is 0000.

Hotel

Mode

Use or key to enter the Hotel Setting menu, please review as Hotel Mode section.

Language

OSD Language

Press key to show the list, then use or to select Language from

German, English, French or Spanish.

Preferred Subtitle

Press key to show the list. Use or to adjust the diff erent language options available.

Language

Preferred Audio

Press key to show the list. Use or to adjust the diff erent language options available.

DTV Teletext Language

Press key to show the list,. Use or to adjust the diff erent language options available.

ATV Teletext Language

Press key to show the list. Use or to adjust the diff erent language options available.

Clock:

Use or key to set the Clock (as default the information is taken automatically from the digital signal)

Sleep

Timer

Use or key to select Sleep Timer mode. Press OK or to enter the Sleep Timer menu settings, then use or to select your decision.

Auto

Power

Off

Press OK or to enter the Auto Power Off menu settings, then use or to select Off , 1 Hour, 2 Hours or 4 Hours. Press

OK or to select your decision.

Hearing

Impaired

Press OK or to enter the Hearing Impaired menu settings, then use or to

select Off or On. Press OK or to select your decision.

Feature

Partition Select

Use or button to highlight the USB drive in the list and press the red button on the remote, then highlight “OK” and press the OK button on the remote, when formatting completes, the USB drive will be ready for recording as below picture.

Auto Timeshift

Press key to show the list,then use or key to select Off or Auto

Press OK or to

Timeshift Buff er

Press key to show the list,then use or key to select Auto, 30 Mins, 1hr or 2hr.

PVR/ Timeshift

enter the PVR/ Timeshift menu

settings.

Timer

Press OK or key to adjust Timer. Press Blue button to Edit Timer list from PVR/Timeshift .

(Please review Feature - Timer - Edit section.)

Record List

Press OK or to enter the Record List menu settings. Press Red button to Delete Record List.

Page 36

Change Settings

Recorder Start

Press OK or key to Start Recorder, and a new window will pop up. Use or key to select OK to enter the submenu or select Cancel to return. You may select to record directly by pressing the EPG button on remote control, see

“Recording Directly by Using EPG” section.

HMDI Link

Please review HMDI Link section.

Feature - Lock - Hotel Setting

Channel Lock

Press

button to select Off or On.

Picture Lock

Press

button to select Off or On.

Sound Lock

Press

button to select Off or On.

Feature Lock

Press

button to select Off or On.

Setup Lock

Press

button to select Off or On.

Key Lock

Press

button to select Off or On.

Source Lock

Press

key to select DTV, ATV, AV, YPbPr, HDMI1, HDMI2, HDMI3, PC, Media or DVD mode, then press to select Off or On.

Set Source

Press

key to select DTV, ATV, AV, YPbPr, HDMI1, HDMI2, HDMI3, PC, Media, DVD mode or Off .

Channel Number

Press

key to adjust the Channel Number from 1 to 100.

Max Volume

Press

key to adjust the Max Volume from 1 to 100.

Default Volume

Press

key to adjust the Max Volume under Default Volume mode .

Press OK button to go to Next Page.

Clear Lock

Press key to adjust Clear Lock.

DataBase Export

Press key to DataBase Export Hotel Setting to your USB. Make sure a fl ash drive is inserted into the USB port

before entering the USB mode.

DataBase Import

Press key to DataBase Import Hotel Setting. Make sure a fl ash drive is inserted into the USB port before

entering the USB mode.

Press OK button to go to Previous Page

Feature-Timer - Edit

Recorder

Press OK or key to show the list, then use or

to select Off or On.

Type

Press OK or key to show the list, then use or

to select DTV or Radio.

Channel

Press OK or key to show the list, then use or

to select your selection.

Page 37

Change Settings

Start Time

Press OK or key to edit the Start Time, then

use 0~9 button to edit Start Time setting.

Press OK or key to enter the

Start Time setting.

Duration

Press OK or key to edit the Duration, then

use 0~9 button to edit Duration., Press OK

or key to enter the Duration.

(Only adjustable under Recorder mode is On)

Date

Press OK or key to edit the Date, then use

0~9 button to edit Date.,

Press OK or key to enter the Date.

Mode

Press OK or key to show the list, then use or

to select Once, Daily, Weekly or

Monthly.

Note:

− Press or key to Move menu.

− Press 0~9 button to edit number.

− Press OK or key to enter your selection.

− Press Menu button to Save menu.

EPG Weekly Mode

Daily

Recorder

Prev Day

Next Day

Move

Info

Display

Exit

7 HD Digital

0070

28/07/2004 13:00-28/07/2004 14:00 PASSIONS

Gwen and Theresa continue to face-off. Sheridan remembers two key people from

her past.

Wed 28/07

Wed

Digital 7 HD Digital

7 1 Digital

Digital

Digital 3 BLUE HEELERS

12:00-13:00

13:00-14:00

PASSIONS

Thu Fri Sat Sun Mon Tue Wed

Scheduled Recording using the

EPG

Press the EPG button on the remote control, navigate to the program you wish to record then press the green button on the remote control 2 times only.

A red “R” symbol will appear next to the program,

indicating that it is set to record.

Scheduled Viewing using the EPG

Press the EPG button on the remote control,

navigate to the program you wish to record then press the green button on the remote control 1 time only. This will activate “Scheduled Viewing” for that program, and a red clock symbol will appear next to the program. This function will not record but will change channels at the scheduled time for viewing of the program.

Page 38

Change Settings

Feature - HDMI Link

Enable HDMI Link

Use or key to highlight

Enable HDMILink, press MENU or to

set as Off or On. Press OK or key

to confi rm your selection.

Auto PowerOn

Use or key to Setup menu for Auto

PowerOn. Press MENU or to set as Off

or On. Press OK or key to confi rm your

selection.

Auto Standby

Use or key to Setup menu for Auto

Standby. Press MENU or to set as Off

or On. Press OK or key to confi rm your

selection.

Amplifi er

Support ARC

Use or key to Setup menu for Amplifi er

Support ARC. Press MENU or to set as

Off or On. Press OK or key to confi rm

your selection.

Device List

Press OK or

List.

key to show the Device

Device Menu

Press OK or

Menu.

key to adjust the Device

Setup

OSD Timer

Use or key to adjust

the amount of time the On Screen Menu

stays on the screen before disappearing.

PC Setup

Use or key to change the

PC Settings in PC mode(Press SOURCE

button to in INPUT list, then press or to

select PC mode).

Blue Screen

Use OK or key to show the list, then use

or key to set as On

or Off .

Home Mode

Use OK or key to show the list, then use or

key to select Home, Dynamic, Standard or

Mild.

Reset TV

Setting

Change to factory default settings.

Press OK or key to and then use or to

select OK to enter the submenu or select Cancel to return. Press OK to confi rm your selection.

Software Upgrade

Press OK or key to enter Software Upgrade.

Setup menu

1. Press MENU button to display the main menu.

2. Use or key to highlight Setup mode,

then press or OK to enter the Setup menu settings.

3. Use or key to highlight the option you

want to reset.

4. Press to show the list of the selected menu,

then press or key to scroll among list.

5. Press , OK or MENU button to confi rm your

selection.

Setup

OSD Timer 15 Seconds Picture PC Setup ENTER

Home

Blue Screen On Sound Home Mode

Page 39

Change Settings

Reset TV Setting ENTER Channel Software Upgrade ENTER

Feature

Setup

Move Ok Enter Exit Exit Menu Retum

Page 40

USB Operation

Use

Input

DTV

ATV

YPbPr

HDMI 1

HDMI 2

HDMI 3

Media

DVD

001/001

Photo

disk 1

Page +/-

Move

CH+-

Enter

Exit

Media Operation

Make sure a fl ash drive is inserted into the USB

port before entering the USB mode.

1. Press SOURCE button on the remote control to

display the input source menu. Use or key to highlight Media source, and press OK button to enter the Media menu.

Movie / e-Book. Press OK to enter.

Photo

1. Use or key to select Photo. Press

OK to enter.

2. Use or key to navigate the fi les or folders

saved in the fl ash drive, press OK to enter. NOTE: When a fi le is selected, the fi le information will appear on the right.

3. Use or key to select the option on

the table, and press OK button to enter the previous menu. Press EXIT at any time to return to the main USB menu.

1). Press the SOURCE

4. Use or key to highlight folder in fl

ash drive, and press OK or key to enter the fi le list, and press button to return to the previous menu. Press EXIT at any time to return to the main USB menu.

disk1/photo

Return

147.jpg

157.jpg

162.jpg

163,jpg 014/122

164.jpg 113KB

165.jpg 2011/05/11

043.jpg

Delete Add/Del all to playlist

Mov e CH+- Page +/- OK Enter Exit Exit

Photo

5. Press or key to move (press OK button to

select the fi le or unfold the folder);

6. Press button to previous menu

7. Press EXIT button to select the fi le view type

list.

8. Press Exit again to return to the root MENU.

9. Then press button to program the fi les (be

signed) in the fold you select.

10. Press RED button to delete the fi le; Press

GREEN button to sign or cancel all the fi les to play list.

11. Press button to enter display.

12. Press Exit butt on to stop and exit the full

screen program, please notes the hints on the bottom.

1600X1000

Page 41

USB Operation

Photo

Play/Pause the photo playing·

Stop and exit the full screen program.

Play the previous fi le directly

Play the next fi le directly

Rotate the picture (0, 90, 180, 270)

Zoom in/out the picture you could move the picture by Cursor left/right/up/down button in Zoom mode.

Display the information of the current fi le.

Display the photo setup menu, and select the Repeat mode, Background Music, Slide Time or Eff ect.

Dis play the playing list.

Note: Use or key to select the option on the table, and press OK button to change Note: You could press OK button display the option table when it disappear.

Music Player

Play/Pause the music playing.

Stop and exit the music playing.

Press to play backward.

Press to play faster.

Press to play the previous song.

Press to play the next song.

Input the time and start playing directly.

All

Select the repeat mode for playing music.

Switch the window between”Information”and”Play list”.

Switch off the screen displaying (BLUE button as quick button), and it will be turned on by except power button).

Note: Use or key to select the option on the table, and press OK button to change Note: You could press OK button display the option table when it disappear.

001/001

Music

disk 1

Page +/-

Move

CH+-

Enter

Exit

Music

1. Use or key to select Music. Press OK

to enter.

2. Use or key to navigate the fi les or

folders saved in the fl ash drive, press OK to enter. NOTE: When a fi le is selected, the fi le

information will appear on the right.

3. Use or key to select the option on

the table, and press OK button to enter the previous menu. Press EXIT at any time to return to the main USB menu.

Page 42

USB Operation

Movie

1. Use or key to select Movie Press OK

to enter.

2. Use or key to navigate the fi les or folders

saved in the fl ash drive, press OK to enter. NOTE: When a fi le is selected, the fi le information will appear on the right.

3. Use or key to select the option on

the table, and press OK button to enter the previous menu. Press EXIT at any time to return to the main USB menu.

Page 43

USB Operation

Movie

Play/Pause the Move playing.

Stop and exit the Move playing.

Press to play backward.

Press to play faster.

Play the movie in slow mode.

Play the movie in step mode.

Set the A-B repeat playing mode.

Play the previous fi le directly.

Play the next fi le directly.

Display the playing list.

Display the information of the current fi le.

Display the movie setup menu, and setup the Program, Subtitle, Audio, Repeat mode.

Goto mode, Input the time and start playing directly.

Note: Use or key to select the option on the table, and press OK button to change Note: You could press OK button display the option table when it disappear.

001/001

Movie

disk 1

Page +/-

Move

CH+-

Enter

Exit

4. Note: Use or key to select the

option on the table, and press OK button to change

5. Note: You could press OK button display the

option table when it disappear.

Play the photo e-Book

1. Use or key to select e-Book, and press OK to

enter.

2. Use or key to navigate the fi les or folders

saved in the fl ash drive, press OK to enter. NOTE: When a fi le is selected, the fi le information will appear on the right.

3. Use or key to select the option on

the table, and press OK button to enter the previous menu. Press EXIT at any time to

return to the main USB menu.

Page 44

USB Operation

e-Book

RED button

Add or delete the bookmark.

GREEN button

Goto the appoint page.

YELLOW button:

Display the bookmark list.

BLUE button:

Display the playlist.

OK button

Show Quick Menu, then use or

to select Background Music,

Music source or Encode Type

Page -

Page +

Exit

Enter

e-Book

1 / 3

,121 have 35 match(es)for robin hobb in listfile: MAJECKI_MAIN .

Type @majeckibiglist to obtain the whole list

Imajecki Robin Hobb - [The Tawny Man 01] - Fool’s Errand(v0.9)[rtf].rar

------------409.53

Imajecki Robin Hobb - [The Tawny Man 01] - Fool’s Errand [covers & map].rar

-------------255.8

Add/Del bookmark

Go to page

Bookmark list

Playlists

4. Note: Use or key to select the

option on the table, and press OK button to change

5. Note: You could press OK button display the

option table when it disappear.

Page 45

General Setup

TV Display

Sets the picture ratio Press

to select desired picture ratio

OSD Lang

Sets the OSD display language Press

to select the desired language

Screen Saver

Toggles the screensaver On or Off Press

to set the screensaver On or Off

Last Memory

Toggles the Last Memory option On & Off . Last Memory memorizes when playback is stopped

and recalls it when the disc is next played.

Press

to set the Last Memory On or Off

Sound Setup

Downmix

Sets the Audio Downmix mode Press

to select Stereo/ LT/ RT

Preferences

TV Type

Sets the Output type

Press or

to select Auto/ PAL/ NTSC

Audio

Sets the preferred DVD audio language

Press or

to select the desired language

Subtitle

Sets the preferred subtitle language

Press or

to select the desired language

Disc Menu

Sets the preferred DVD Menu language

Press or

to select the desired language

Parental

Sets a parental lock on compatible DVD discs

Press or R, NC17 or A

to select KID SAF, G, PG, PG 13, PGR,

Password

Sets a password for the parental lock

Use the numerical buttons to enter a password

DVD Operation

DVD Player Setup

1. During disc playback, press SETUP to go to

Preference Page.

2. Use or keys to switch among General

Page, Audio Setup Page and Preference Page.

3. Use or to highlight the item you

would like to reset.

4. Press to select the switch to the submenu, use

or select your desired setting.

5. Press to return to the previous menu or press SETUP at any time to

exit the setting.

Page 46

Default

Restores the DVD player settings to it’s original

settings

Press or to select Reset

Page 47

DVD Player Controls

Page 48

No.

Button

Function

TAUUNTOE

Press to eject DVD/CD

HOLD

Press to select the previous track/ chapter during playback

Press to start, pause or restart the playback

STEP REVEAL

Press to play the previous fi le directly

APS

SIZE

Press to play the next fi le directly

S.PAGE

Pres to select the next track/ chapter during playback

Press to stop playback

SEARCH GOTO

Jump to a specifi c time on a DVD/ VCD/MP3/WMA or CD

NICAM AUDIO

Cycles through NICAM sound modes

Press to start the A-B repeat function (playback loop of a segment of track)

PBC

TITLE

Display DVD/VCD Title

Press to enter the DVD SETUP

Page 49

Repeat

Press to enlarge the screen images

Used to start the programmed playback function

Page 50

DVD Operation

Compatible Media

Type

Compatibility

Disc (12 cm Disc

Only)

DVD / DVD-R /DVD+R / DVD-RW / DVD+RW

VCD / SVCD CD/ CDR / CDRW

Multimedia Format

MP3 / WMA / JPEG / MPEG-1 / MPEG-2 / MPEG-4 DIVX3.xx / DIVX5.xx

Loading a Disc

Before loading a disc into the disc compartment:

● Check and make sure there is no disc in the

disc compartment.

● Make sure the label side of the disc is facing

back when inserting a disc.

● Do not use excessive force when inserting a

disc.

1. Press POWER button on the control panel or

on the remote control to switch on the TV.

2. Press SOURCE button on the remote control

to display all the available input source for your TV. Use or to highlight DVD mode and press OK to enter.

3. Insert a compatible disc into the disc

compartment on the right side of the TV.

4. Depending on the disc format, the playback

may automatically start or a menu will appear on screen allowing playback of fi les.

DVD/VCD/SVCD Playback

When playing a DVD/ VCD/ SVCD/ CD

● Press to eject the disc.

● Press to Start, Pause or restart the playback.

● Press to stop the playback.

● Press or during playback to skip to

the previous or next chapter/track.

● Press REVEAL

● Press SIZE

● Press A-B to start the A-B repeat function.

● Press the number buttons 0~9 to select the

When playing a DVD

● Press PBC/SUBTITLE to display the DVD

● Press SUBT to display subtitles on compatible

● Press MTS/ AUDIO to change the audio

When playing a DVD/ VCD/SVCD

● Press ZOOM to enlarge the playback display.

STEP

to play the previous fi le directly

APS

to play the next fi le directly

Press once for the desired start point and press again for the end point.

chapter or track to play.

menu.

media. Press repeatedly to cycle through subtitle options

track/language. Press repeatedly to cycle through available tracks.

Press repeatedly to cycle through zoom levels.

Video/Audio/Picture Playback

When a disc with compatible video/

audio/picture fi les is inserted into the disc compartment, a fi le navigation menu will appear on the screen.

Page 51

DVD Operation

Select

Move

Exit

00:00

001

Disc

00:00

_ _MP3 - 165

Select

Move

Exit

00:00

001

Disc

00:00

Movie

Select

Move

Exit

00:08

018

004

Disc

03:55

Artist - Track 1

Artist - Track 2

Artist - Track 3

MP3

Artist - Track 4

MP3

Artist - Track 5

MP3

Artist - Track 6

MP3

Album\ Artist \

●

to eject the disc.

●

to Start, Pause or restart the

●

to stop the playback.

previous or next chapter/track.

When viewing a picture

● Press ZOOM to enlarge the display. Press

repeatedly to cycle through zoom levels.

● Press or to display the previous or

next picture.

Page 52

Problem

Solution/Issue

TV does not operate

●

Make sure the power cord is plugged in. Try another AC outlet. Power is off , check fuse or circuit breaker.

●

Unplug unit for an hour, then plug it back in.

Normal picture, but no sound

●

Check the volume settings. Sound muted? Press MUTE button. Try another channel.

●

Check audio cable connections.

The remote control does not work

●

Make the remote control is in range with no obstructions. Check the batteries. Correct operating mode set: TV, VCR etc.

Poor sound or no sound

●

Station or Cable TV experiencing problems, tune to another station. Check sound adjustments (Volume or Mute). Check for sources of possible interference.

Poor picture or no picture

●

Station or Cable TV experiencing problems, tune to another station. Make sure channels are set into memory. Check antenna or Cable TV connections, adjust antenna. Check for sources of possible interference.

●

Check picture control adjustments.

Poor TV reception

●

Ensure the antenna amplifi er is turned on for Antenna TV. Adjust the antenna position to a stronger signal receiving angle. Check the Antenna connection is tight to the TV. Check there is power supplied to the Antenna distribution box.

●

Confi rm your incoming cable is connected to the correct cable / antenna wall connection inside the RV.

●

Ensure the internal RV coax jump cable is connected to the correct port.

Poor Cable / Satellite TV Reception

●

Ensure antenna amp is turned off for able signal. Check incoming Cable is connected correctly to RV. Ensure cable splitter box has power. Confi rm the incoming cable is connected to the correct cable / Satellite wall connection inside your RV.

●

Ensure the internal RV coax jump cable is connected to the correct port.

●

Check Dish has not obstruction.

TV shuts off

●

Sleep Timer is set. Power interrupted.

Trouble Shooting

Page 53

TV AV input plays black and white

●

Check RCA connections on the back of the TV and from the source to ensure they are connected to the correct connections. Ensure the yellow connection is in the correct port.

MODEL, DIMENSION & RESOLUTION

TV Model

Dimension without Stand (L*H*W)

Dimension with Stand (L*H*W) Max Resolution

FEHD19S0N

18” x 115/8” x 17/8”

(456 x 295 x 47mm)

18” x 1215/16” x 57/8”

(456 x 329 x 149mm)

1366 x 768 @ 60Hz HD

FEFD22S0D

211/16” x 131/2” x 2”

(534 x 342 x 50mm)

211/16” x 143/16” x

57/8” (534 x 376 x

149mm)

1920 x 1080 @ 60Hz FHD

FEHD24S0D

2215/16” x 149/16” x 21/16” (582 x 368.7 x

52mm)

2215/16” x 1515/16” x 71/4”

(582 x 404 x 183mm)

1366 x 768 @ 60Hz HD

INPUT & OUTPUT CONNECTIONS

TV Model

HDMI

VGA

(PC) in

Audio

(PC)

Coaxial

Audio

Out

USB

Audio/Video

Out

Audio/Video in

Component

YPbPr Video In

Earphones

RF in

FEHD19S0N

3 1 1 1 1

1 x Right (Red)

1 x Left

(White)

1 x Right (Red)

1 x Left (White)

1 x Video

(Yellow)

1 (Mini - use

inclusive adapter)

1 1 FEFD22S0D

3 1 1 1 1

1 x Right (Red)

1 x Left

(White)

1 x Right (Red)

1 x Left (White)

1 x Video

(Yellow)

1 (Mini - use

inclusive adapter)

Specifications

Page 54

FEHD24S0D

3 1 1 1 1

1 x Right (Red)

1 x Left

(White)

1 x Right (Red)

1 x Left (White)

1 x Video

(Yellow)

1 (Mini - use

inclusive adapter)

Page 55