Furrion FACW12PA-BL Instruction Manual

Single Zone Premium Wall Thermostat

Instruction Manual

Model: FACW12PA-BL

1

Welcome

Thank you for purchasing this Furrion® Single Zone Premium Wall Thermostat.
Before operating your new product, please read these instructions carefully. This
instruction manual contains information for safe use, installation and maintenance of
the product.

Please keep this instruction manual in a safe place for future reference. This will
ensure safe use and reduce the risk of injury. Be sure to pass on this manual to new
owners of this product.

The manufacturer does not accept responsibility for any damages due to not
observing these instructions.

If you have any further questions regarding our products, please contact us at

[e-mail]

2

Contents

Welcome ............................................................................................1

Contents ............................................................................................2

About your Thermostat ......................................................................3

Product Features .....................................................................................................3

Control Buttons .......................................................................................................3

LCD Icons ................................................................................................................4

Installation ........................................................................................5

What’s in the Box ....................................................................................................5

Thermostat Installation ..........................................................................................5

Operation ...........................................................................................7

Turn On/Off the Thermostat ....................................................................................7

Temperature Format ...............................................................................................7

Operation Mode .......................................................................................................7

Set the Temperature ...............................................................................................9

Set the Fan Speed ...................................................................................................10

Mood Light ...............................................................................................................10

Sleep Mode ..............................................................................................................10

Special Features ................................................................................ 11

Auto Fan ..................................................................................................................11

Compressor Time Delay..........................................................................................11

LCD Error Code .......................................................................................................11

Wiring Diagram ................................................................................. 12

Specifications ....................................................................................13

Warranty ............................................................................................14

3

About your Thermostat

Product Features

Your Single Zone LCD thermostat is equipped with a liquid crystal display (LCD) to
indicate the temperature set-point in Fahrenheit(°F)/Centigrade(°C) and fan speed. It
is also equipped with LCD to indicate the system available operation modes.

NOTE: The available operation modes will be different depending on the system
installed in your RV.

● Liquid Crystal Display and Mode Indicators

● Auto Fan

● Room Temperature Display

● Fahrenheit(°F)/Centigrade(°C) Display

● Sleep Mode

● LED Mood Light

Control Buttons

Press to increase the
temperature set-point

Press to decrease the
temperature set-point

Press to change the
color of mood light

Press once to turn on.
Press repeatedly to
select mode

Press to select
Fan Speed

Press to select SLEEP
mode

4

About your Thermostat

LCD Icons

Press to increase the
temperature set-point

Operation Mode

Fan Speed

Room Temperature or
Error Code

Press to decrease the
temperature set-point

Press to change the
color of mood light

Press once to turn on.
Press repeatedly to
select mode

Press to select
Fan Speed

Press to select SLEEP
mode

5

Installation

What’s in the Box

Make sure you have all the following
items included in the packaging. If any
item is damaged or missing, contact
your dealer.

– Thermostat x 1
– Instruction Manual x 1
– Warranty Card x 1
– Self-tapping Screw x 2

Thermostat Installation

1. Select a suitable location that is not
under direct influence from light, sun
or other heat sources.

2. Rotate the thermostat cover
counterclockwise and pull out the
base plate. (Fig. 1)

Fig. 1

3. Use the base plate as a template and
drill a hole on the vehicle wall. Extend
the four wire cables from the cutout
area. Refer to the cable tag label for
each cable definition. (Fig. 2)

Thermostat Cables

Fig. 2

4. Fix the base plate on the wall using 2
screws. (Fig. 3)
NOTE: Make sure the base plate is
not covering the hole and squeezing
the thermostat cables.

Thermostat Cables

Fig. 3

6

Installation

5. Connect the cables to thermostat.
Rotate the thermostat clockwise until
it clips into place. (Fig. 4 and Fig. 5)

Thermostat
cables

Fig. 4

Fig. 5

7

Operation

Your Furrion wall thermostat has been
preprogrammed with factory default
settings. Review the settings below and
adjust to your comfort level.

FACTORY DEFAULT SETTINGS

HEATING 68ºF / 20ºC

COOLING 72ºF / 22ºC

FAN SPEED AUTO

MODE AUTO

FURNACE DIFFERENTIAL 2ºF

Turn On/Off the Thermostat

To turn On

Press and hold the button for 3
seconds to turn on the thermostat. The
thermostat LCD will be illuminated and
the factory settings will be displayed on
the LCD for first time use.
NOTE: The LCD will display the
last setting if you have changed the
parameters.

To turn Off

Press and hold button for 3 seconds
to turn off the thermostat.
Only the current room temperature will
be displayed on the LCD.

Temperature Format

Simultaneously press both and
buttons for 3 seconds to toggle the
temperature format between Centigrade
and Fahrenheit.
NOTE: ºF indicates Fahrenheit and ºC
indicates Centigrade.

Operation Mode

After the thermostat is turned on,
press the button repeatedly to toggle
through the available modes. The
activated mode icon and temperature
set-point will be displayed on the LCD.
The thermostat will transmit the last
selected operation mode command to
the control box after 2 seconds without
any operation.

Depending on the system installed, there

8

Operation

are 5 available modes (AUTO, COOL,
HEAT, FAN and DRY) for you to select.

See the following tables for detailed
information of each mode.
NOTE: The HEAT mode is only available
after the furnace is enabled.

AUTO MODE

● The system will changeover
between COOL and HEAT mode
according to the room temperature.
For example, when the room
temperature is below 68ºF (20ºC),
the system will operate in HEAT
mode. In contrast, when the room
temperature is above 77ºF (25ºC),
the system will operate in COOL
mode. It operates the Dry Mode in
comfort temperature between 68ºF
(20ºC) to 77ºF (25ºC).

● The AUTO icon and the current
temperature set-point displays on
the LCD.

COOL MODE

● The system will cycle the
compressor on and off based on
the room temperature and the
temperature set-point.

● The fan will be turned on after the
compressor is running.

● There are 4 fan speed selections in
this mode.

Low

The fan operates continuously at
low speed and the

icon

displays on the LCD.

Med

The fan operates continuously at
medium speed and the
icon displays on the LCD.

High

The fan operates continuously
at high speed and the
icon displays on the LCD.

Auto

The fan speed varies depending
on the difference between the
temperature set-point and room
temperature. The

icon

displays on the LCD.

9

Operation

HEAT MODE

NOTE: The HEAT mode is only available

when the furnace is enabled.

● The system will cycle the furnace
on and off based on the room
temperature and temperature set­point.

● There are 4 fan speed selections in
this mode.

● The fan speed selections only apply
to the rooftop fan that is part of
the Air Conditioner. The fan speed
selection does not change the fan
speed of the furnace.

Low

The fan operates continuously at
low speed and the

icon

displays on the LCD.

Med

The fan operates continuously at
medium speed and the
icon displays on the LCD.

High

The fan operates continuously
at high speed and the
icon displays on the LCD.

Auto

The fan speed varies depending
on the difference between the
temperature set-point and room
temperature. The

icon

displays on the LCD.

OFF

The fan is off. The

icon

displays on the LCD.

FAN MODE

● The temperature set-point is not
available.

● There are 3 fan speed selections in
this mode.

Low

The fan operates continuously at
low speed and the

icon

displays on the LCD.

Med

The fan operates continuously at
medium speed and the
icon displays on the LCD.

High

The fan operates continuously
at high speed and the
icon displays on the LCD.

DRY MODE

● Compressor runs continuously
when room temperature is higher
than set-point.

● Compressor cycles ON for 10
minutes and OFF for 6 minutes
when room temperature is lower
than set-point.

● The fan speed runs continuously at
low speed.

Set the Temperature

The temperature set-point ranges from

10

Operation

60ºF~86ºF (16ºC~30ºC).

1. Press button to toggle to your
desired mode.

2. Press or button to increase or
decrease the temperature set-point
to your comfort level.

NOTE: The temperature set-point is not
available in FAN mode.

Set the Fan Speed

1. Press button repeatedly to toggle
to your desired mode.

2. Press FAN button to select AUTO,

HIGH, MEDIUM or LOW fan speed.

NOTE: The fan speed selection is not
available in DRY mode.

Mood Light

The thermostat is designed with 7

predefined colors of LED light in the air
distribution box.

1. Press LIGHT button on the
thermostat to turn on the mood light.

2. Press LIGHT button to toggle to your
desired mood light.

3. To turn off the mood light, press
LIGHT button repeatedly until the
mood light turns off.

Sleep Mode

1. Press SLEEP button on the
thermostat to turn on SLEEP mode.
The SLEEP icon and the current
temperature set-point will be
displayed on the LCD.

2. After meeting desired temperature.
In Cool Mode:
The temperature set-point will
increase 2ºF after running for 1 hour
and increase 2ºF after running for 2
hours, then the fan speed will be fixed
to LOW speed.
In Heat mode:
The temperature set-point will
decrease 2ºF after running for 1 hour
and decrease 2ºF after running for 2
hours, then the fan speed will be fixed
to LOW speed.

11

Special Features

Auto Fan

When the auto fan mode is selected,
the fan speed will vary depending on
the temperature difference between the
temperature set-point and the room
temperature.

Temperature
Difference

Fan Speed

>3ºF

The fan operates on High
level

>1

ºF

The fan operates on Med
level

<-1

ºF

The fan operates on Low
level

Compressor Time Delay

A time delay of approximately three
minutes occurs any time the compressor
is required to begin the cooling cycle.

NOTE: The time delay occurs
automatically after a mode is selected
or a power event occurs to ensure
pressure in the compressor is equalized
appropriately, to prevent damage.

Power Interruption

In the event the power to the air
conditioner or controller is interrupted,
the system will restart automatically
with the last status and operational
parameter set-points once the power is
restored.

LCD Error Code

The following error code will be
displayed on the LCD when the system
detects one of the following faults has
occurred.

LCD Error Code

E1

Indoor temperature sensor out of
order. System will shut down.

E2

Evaporator temperature sensor out
of order. System will shut down.

E3

Loss of communication between the
thermostat and control box. System
will shut down.

E4

Condenser temperature sensor out
of order. System will shut down.

E5

Outdoor temperature sensor out of
order. System will shut down.

lo

Insufficient low level of +12V power
supply. System will shut down.

12

Wiring Diagram

6

5

4

3

2

1

BLU

RED

BLK

YEL

RED

WHT

WHT

BRN

GRN/YEL

INDOOR

MOTOR

COMPRESSOR

R S

C

O.L

WHT

6PIN CONN

IF

COM

CP

PASSED
DIELECTRIC

(CONN TO AIR DISTRIBUTION BOX)

USE COPPER CONDUCTORS ONLY.

OUTDOOR
MOTOR

GRN/YEL

WHT

BLK

GRN/YEL

OF

RED

GRN/YEL

BLU

CAPACITOR

2

3

1

HEAT ELEMENT

LIMMITED SWITCH

FUSE

BLK

RED

REDRED

3PIN CONN

HEAT ELEMENT

BLK

BLK

RED

RED

(OPTIONAL)

GRN/YEL

BLU

BLK YEL

RED

HIGH

MED

LOW

RY2

ON

COM

TO UPPER
UNIT

WHT

BK

WALL THERMOSTAT

BR

12V

G

TO FURNACE
THERM

+12V

GND

GRN/YEL

WHT

RGB LED

COIL SENSOR

ROOM SENSOR

B
A

12V

GND

654321

115VAC
60Hz 1

∅

BLU

BLK

YEL

RED

CN3

CN2

CN6

CN5

CN1

RED BLK

BRN BRN

ANALOG
CONTROL

CN8

PASSED DIELECTIC

BK

RY7

TO UPPER
UNIT

WHT

WHT

GAY

Elect.Heater
Optional*

13

DC Input Power DC 12V

Power Consumption <0.5W

Baud Rate 9600bps

Dimension 3 x 3 x ⁄” (75 x 75 x 22.5mm)

Weight 0.06kg

LCD Viewing angle 12 o’clock

Specifications

14

Warranty

FURRION WARRANTS FOR A PERIOD OF 1 YEAR FROM DATE OF RETAIL PURCHASE
BY THE ORIGINAL ENDUSE PURCHASER, THAT THIS PRODUCT, WHEN DELIVERED
TO YOU IN NEW CONDITION, IN ORIGINAL PACKAGING, FROM A FURRION
AUTHORIZED RESELLER AND USED IN NORMAL CONDITIONS, IS FREE FROM
ANY DEFECTS IN MANUFACTURING, MATERIALS, AND WORKMANSHIP. IN CASE
OF SUCH DEFECT, FURRION SHALL REPLACE OR REPAIR THE PRODUCT AT NO
CHARGE TO YOU. THIS WARRANTY DOES NOT COVER: PRODUCTS WHERE THE
ORIGINAL SERIAL NUMBERS HAVE BEEN REMOVED, ALTERED OR CANNOT
READILY BE DETERMINED; DAMAGE OR LOSS CAUSED BY ACCIDENT, MISUSE,
ABUSE, NEGLECT, PRODUCT MODIFICATION, FAILURE TO FOLLOW INSTRUCTIONS
IN INSTRUCTION MANUAL, COMMERCIAL OR INDUSTRIAL USE; DAMAGE OR LOSS
CAUSED TO THE DECORATIVE SURFACE OF PRODUCT; TO ANY DATA, SOFTWARE OR
INFORMATION; AND NORMAL WEAR AND TEAR. THIS WARRANTY ONLY PROTECTS
THE ORIGINAL ENDUSER (“YOU”) AND IS NOT TRANSFERABLE; ANY ATTEMPT TO
TRANSFER THIS WARRANTY SHALL MAKE IT IMMEDIATELY VOID. THIS WARRANTY
IS ONLY VALID IN THE COUNTRY OF PURCHASE.

THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS OR IMPLIED. FURRION SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IF FURRION CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS
LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE DURATION OF THIS WARRANTY.

No Furrion reseller, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.

15

Warranty

FURRION IS NOT RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF
ANY EQUIPMENT OR PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING,
OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH FURRION
PRODUCTS. FURRION’S TOTAL LIABILITY IS LIMITED TO THE REPAIR OR
REPLACEMENT OF THIS PRODUCT PURSUANT TO THE TERMS OF THIS WARRANTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR EXCLUSIONS OR LIMITATIONS ON THE DURATION
OF IMPLIED WARRANTIES OR CONDITIONS, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR (WHERE
APPLICABLE IN THE COUNTRIES WHERE FURRION HAS NON-US/CANADIAN
AUTHORIZED DEALERS) COUNTRY. NO ACTION OR CLAIM TO ENFORCE THIS
WARRANTY SHALL BE COMMENCED AFTER THE EXPIRATION OF THE WARRANTY
PERIOD.

Keep your receipt, delivery slip, or other appropriate payment record to establish the
warranty period. Service under this warranty must be obtained by contacting Furrion
at [e-mail]

Product features or specifications as described or illustrated are subject to change
without notice.

161718

IM-FHA00028 V1.0

Furrion Innovation Center & Institute of Technology

 52567 Independence Ct., Elkhart, IN 46514, USA  Toll free:1-888-354-5792

 Email: [e-mail]

©2007-2018 Furrion Ltd. Furrion® and the Furrion logo are trademarks licensed for use by

Furrion Ltd. and registered in the U.S. and other countries.

FURRION.COM