Furman Sound SPB-8-8E User Manual
S O U N D , L L C
9 VDC REGULATED OUTLETS
FOR PEDALS, 100mA MAXIMUM
PER OUTPUT
STEREO PATCH BAY
FEATURES
• The Pedal Board is a solid,
non-slip base for up to 8 pedal
effects that lets you leave
everything powered up and patched
together as you like it
• Pedal effects attach securely to a
12” x 25” Velcro™ pad
• Included padded travel case is stur-
dy and roomy, ts the Pedal Board
with all effects attached, has two
internal storage pouches, and includes a shoulder strap
• Stereo effects return, effects loop,
and amplier outputs
• Eight 9VDC outlets, with 8 included
power cords
• Three widely spaced 120VAC, 15A
outlets allow enough room for “wall
warts”
• Furman’s quality spike and surge
suppression and EMI/RFI ltering
assures clean power
• Toroidal transformer for ultra
low-noise performance
The first Pedal Board designed with the working professional in
mind. Guitar players, bassists, and keyboard players have all asked
for this, and we answered with the most rugged, versatile, and useful
board available anywhere.
DESCRIPTION
The Furman SPB-8 features heavy duty metal construction
that will handle the most forceful stomps you can offer, as well
as stand up to the rigors of the road. The rst stereo board on
the market, it is also the rst to feature the high level of power
conditioning that Furman is famous for.
At the heart of the SPB-8 Stereo Pedal Board is a light yet
rugged polycarbonate platform in combination with a steel
chassis and an ample 12” x 24” Velcro™ sheet, ensuring secure,
noiseless, ex free, non-slip performance for up to eight effects
boxes and pedals.
The SPB-8’s stereo patch bay contains ten 1/4” switching
phone jacks, connected in two stereo loops. This allows a single
guitar or instrument input to feed multiple mono and stereo
effects boxes, send and return from remote effects, and feed up
to two ampliers simultaneously. From modest to highly complex
patching demands, the SPB-8 allows nearly unlimited set-up
exibility.
SPB-8/8E Patch Bay
• Rugged construction will withstand
years of on-stage use and abuse
• Extra-long 10-foot AC cord
F u r m a n S o u n d , L L C • 1 6 9 0 C o r p o r a t e C i r c l e • P e t a l u m a , C A 9 4 9 5 4 - 6 9 1 9
P h o n e : 7 0 7 . 7 6 3 . 1 0 1 0 • Fa x : 7 0 7 . 7 6 3 . 1 3 1 0 • w w w. f u r m a n s o u n d . c o m
Powering your pedals, amps and other gear,
10 FOOT AC POWER
CORD
15 Amp BREAKER
AC OUTLETS WITH RFI/EMI
and SURGE SUPPRESSION
the SPB-8 offers two levels of surge and short
circuit protection, as well as RF and EMI ltering.
Furman’s SPB-8 is quiet, powering both AC and DC
pedals without hum, due to the high quality toroidal
transformer employed. Each DC output is rated
at 100 mA, as well as being individually protected
against shorts — guaranteeing that if one pedal
goes out, the rest are protected and continue to
function.
The SPB-8 makes pack-up simple and
convenient. Unpatching several effects boxes and
pedals is no longer required, since the large Velcro
sheet and included mating strips rmly secures
all of your pedals in place. A sturdy, padded case
is included and comes with a shoulder strap and
zippered pouches for storing cables, wall warts, and
AC cords.
SPB-8/8E AC Section
THREE YEAR LIMITED WARRANTY
The Furman PL-8 and PL-PLUS are protected
by a limited three-year warranty covering defects in
materials and workmanship.
OPTION
Model SPB-8 E: “E” sufx versions are for use
in countries with 220/240 volt AC lines.
SPB-8/8E SPECIFICATIONS
POWER CONDITIONING
Current Rating: 15 Amps total AC outlets (10
Amps “E” version)
Spike Protection: Line to Neutral
Spike Clamping Voltage: Initial turn-on at 200 Volts;
TVSS rating of 400 Volts peak
at 500 Amps (“E” version
initial turn-on is 390 Volts
peak)
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Maximum Spike Energy: 80 Joules (“E” version 130
Joules)
Noise Attenuation: Transverse mode - greater
than 20 dB, 800 kHz to 10
MHz
9 VDC SUPPLY
Current Rating: 100 mA.per outlet, 1A
maximum combined current
for all outlets
Protection: (8) discrete PTC
automatically resettable
fuses.
Fuse trip time: 0.2 second for 1 amp fault
9 VDC Patch Cords: (8) 3.5mm miniplug (tip hot)
to P205L 2.1mm x 5mm
“DC connector” (sleeve hot)
(1) 3.5mm miniplug (tip hot)
to 3.5mm miniplug (tip hot)
(1) 3.5mm miniplug (tip hot)
to 9 Volt battery clip (non-
perforated clip hot)
GENERAL
Weight SPB-8 unit: 11 lbs. (5 kg)
Travel Bag: 2.4 lbs. (1.1 kg)
Dimensions SPB-8 unit: 3.9” H x 26” W x 17.5” D (10 x
66 x 44.5 cm)
Travel Bag: 5.5” x 27.5” x 19” (14 x 70 x
48 cm)
Safety Agency Listings: CE and CSA / NRTL
F u r m a n S o u n d , L L C • 1 6 9 0 C o r p o r a t e C i r c l e • P e t a l u m a , C A 9 4 9 5 4 - 6 9 1 9
P h o n e : 7 0 7 . 7 6 3 . 1 0 1 0 • Fa x : 7 0 7 . 7 6 3 . 1 3 1 0 • w w w . f u r m a n s o u n d . c o m
Loading...