Furman Sound AC-215 User Manual

AC-215 / AC-210 E AC Power Conditioner

- 2 -

AC-215 / AC-210 E Power Conditioner. For

video, and broadcast professionals. Furman’s

worst, they can severely damage individual

●

Advanced Linear Filtering Technology for

●

Series Multi-Stage Protection Plus for AC

●

Zero ground contamination circuitry

●

Compact chassis design easily attaches

AC-215 / AC-210 E Power Conditioner, please

Warning

Warning

AC-215 / AC-210 E AC Power Conditioner

- 3 -

4. The unit should only be connected to a 120

VAC, 60Hz, 15 Amp [230 VAC and10 Amp for

what is described in this manual. All other

While the AC power delivered by today’s

video equipment. With the average investment

Another feature unique to Furman’s SMP+

AC event. The Extreme Voltage Shutdown

AC-210 E when it is fed 137 volts [270 VAC

for the AC-210 E] or higher, protecting itself

voltage. Only Furman offers this advanced

AC-215 / AC-210 E AC Power Conditioner

- 4 -

NOTE: If the mains power is above the high
cutoff voltage and has caused the unit to
remove power from its outlets, it cannot restore
power without the operator manually turning
the unit off, then on again. Avoid turning the
unit back on, without fi rst checking the source
of the problem, and perhaps changing the AC
source.

Although the Furman SMP+ circuit assures

without some degree of damage. In the rare

will turn off. If this happens, some level of

Possible Cause

tripped due to excessive load.

Action Needed

equipment from the AC-215 / AC-210

E, and push the re-set tab into the

Circuit breaker bezel.

Possible Cause

are damaged.

AC-215 / AC-210 E AC Power Conditioner

- 5 -

AC-215 / AC-210 E AC Power Conditioner

- 6 -

Warranty

AC-215 / AC-210 E, that the product will be

free from defects in material and workmanship

for a period of three years from the date of

Warranty during the warranty period (as

A PARTICULAR PURPOSE. Furman does

written authorization from Furman Sound. This

warranty also does not apply to products upon

which repairs have been affected or attempted

with respect to this product or any part thereof,

whether based on contract, tort, strict liability,

whether based on this Limited Warranty or

warranty. This Limited Warranty states the

Warranty claims should be accompanied by a

AC-215 / AC-210 E AC Power Conditioner

- 7 -

All equipment being returned for repair must

for repair, please use the original packaging to

AC Current Capacity

Input:

15 Amp capacity required (10 Amp for the AC-210 E)

Output:

15 Amp RMS (both outlets combined) (10 Amp for the

AC-210 E)

AC Noise Attenuation

>80dB from 100kHz to 1GHz

Series Multi-Stage Protection Plus Non-Sacrifi cial

with Zero Ground contamination

188V peak clamping @ 6000V/3000A input

276V peak clamping for AC-210 E

137 VAC typically

(270 VAC typically for the AC-210 E)

1.75” (H) x 5” (W) x 8.5” (D), 3 lbs.

CE / TUV / NRTL-C

Web: www.furmansound.com