Please contact us if you need further assistance:
Tech support: tech@furiousfpv.com
Sales support: sales@furiousfpv.com
Website: http://furiousfpv.com/
SPD15-FRSky
FuriousFPV Full Telemetry S.PORT
1.5KM Diversity Receiver
USER MANUAL
Introduction
Bringing forth a fusion of range, capability & feature packed brilliance, Furious FPV debuts the
super compact receiver of your FPV dreams.
The SPD15 is ultra-durable with a design that prevents water & dust from causing damage and it
is a pint size power house boasting a full 1.5KM of reception range. Add the functionality of Two
Way Duplex Transmission capability, meaning full telemetry, allowing you to keep tabs on vital
information throughout your flight.
Pushing the boundaries is Smart Port Technology, allowing real time adjustment of PID's, VTX
settings and more - right from your transmitter. From channel selecting to VTX power output, Smart
Port Technology opens all new worlds of in-flight adjustability, right where it belongs.
Featuring 16 channel S-Bus output that can be flashed with different firmware via Taranis as a
FrSky receiver system, the SPD15 receiver system is lighter in overall weight and smaller in size than
the XSR, featuring massive functionality to push your FPV experience to the absolute limits.
Reside in the EU? Furious FPV has you covered with a dedicated LBT (Listen before Talk) version,
offering EU users full compatibility with LBT firmware options that are currently available.
Step up to full range capability without compromise. With the Furious FPV SPD15 Receiver, epic
levels of feature packed insanity await your next flight, with full capability in an ultra-compact form.
Features
Smart Port enabled, realizing two-way full duplex transmission
S-BUS output. Support 1~16ch from SBUS channel
Full water and dust protection
Lighter weight and physically smaller than XSR
Full range: up 1.5km
Support LBT version and International
version
Specifications
Dimension: 18*26*5mm (L x W x H)
Antenna Length: 150mm
Weight: 3.0g
Power input: 5.0V
Operating Current: 100mA @5V
Compatibility
FrSky X-series Module & X9D & X9DP &X9E & X12S in D16 mode.
The LBT version of SPD15 receiver only works with FrSky D16-LBT Version.
Binding procedure
1. Turn on transmitter and go to page MODEL SETUP and select MODE D16 then go to BIND
and press enter to active bind mode – as below picture.
2. Connect battery for SPD15 receiver while holding F/S button. Red LED and green LED on
receiver will solid. When red LED on receiver is shut down, indicating the binding process is
completed
3. Turn off both transmitter and receiver.
4. Turn on transmitter then plug battery for SPD15. Green LED on SPD15 is solid, this mean
SPD15 is receiving signal from your transmitter. If Red LED blinks – RX lost signal.
Failsafe
1. Turn on SPD15 and transmitter
2. Move the controls to desired failsafe position for all channels
3. Fast press (<1s). Green LED will flash twice, indicating the failsafe position has been set in
the receiver.
To disable Failsafe function:
Turn off TX and Turn on RX then fast press (<1s). Green LED will flash twice, indicating the
failsafe function disable.
Thanks for using our product
Loading...