Furinno FNBL-22005 Assembly Instruction Manual

20kg

5kg

MODEL:

Furinno Besi New Office Computer Desk

FNBL-22005

STEP 5

Attach the finished product from Step 3 to
Top Panel(B) with Long Screw(3), as shown.

STEP 6

Slide Keyboard Panel(E) along the
Rail Tracks.

A

B

B

E

A

(3)x 2pcs

www.furinno.com

Assembly Instruction

Recomm. 2 Person

Approx. 30 minutes

Tools Required

Customer Service

Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [e-mail]

WARNING:

>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

Recommended Maximum Weight

STEP 2

Fix Back Panel(D) to L/R-Support Frame(C) with
Screw/Dowel Nut(4).

Note:Place the Dowel Nut Hole towards Screw Holes to
Receive Screws.

(4)x 4pcs

1

2

3

4

5

5

5

5

5

6

7

7

6

6

7

4pcs

8pcs

2pcs

4pcs

2pcs

1pcs

1pcs

A

A

A

B

B

B

C

D

C

C

C

C

C

C

D

D

E

E

1pcs

1pcs

2pcs

1pcs

1pcs

STEP 3

Install L/R-Rail Tracks(6)(&) to Top Panel(B)
by screwing Short Screw(1) to the corresponding
holes, as shown.

STEP 4

Attach Upper Shelf Support(5) to Top Panel(A)
with Middle Screw(2) to the corresponding
holes, as shown.

STEP 1

Attach L/R-Support Frame(C) to Top Panel(B)

with Medium Screw(2).

Upper ShelfShort Screw

Medium Screw

Long Screw

Screw/
Dowel Nut

Upper Shelf Support

R-Rail Track

L-Rail Track

Top Panel

L/R-Support Frame

Back Panel

Keyboard Panel

(2)x 4pcs

(1)x 4pcs

(2)x 4pcs

B

D

C

C

Front

Back

Note: Screw hole openings
on the Support Frame should
be at the back.

No Hardware List Qty No QtyParts List

USEFUL HINTS BEFORE YOU START:

1. Read each step carefully before starting.

2. It is important that each step is performed in correct order to avoid difficulties.

3. Identify, sort and count the parts before assembly.

4. Assemble your furniture on packaging cardboard to prevent scratch or damage.

5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.

6. Using uncompatible hardware might cause damage to product.