
Assembly Instruction
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: support@furinno.com
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Fix Metal Panel(B)to Cross Bar(C),as shown.
STEP 3
Recommended Maximum Weight
Furinno Xiannan L60 Metal 3-Tray
Rolling Cart
FNBJ2208020140422
MODEL :
FNBJ-22080
23.6”(W) x 29.5”(H) x 12.6”(D)DIMENSION :
*Unit in Pound(lbs)
B
B
B
Note: Make sure Metal Panels(B)are
tightly attached to Cross Bars(C).
15
15
15
Recomm. 1 Person
Approx. 20 minutes
No Tools Required

STEP 2
Fix Cross Bar(C)to the L/R Stand(A)using Hexagon Screw(1).
STEP 1
Insert Caster w/Stopper(3)and Caster(4)
to L/R Stand(A),as shown.
3
3
4
A
A
B
B
B
C
C
C
(A)x2pcs
(3)x 1pcs
(4)x 1pcs
A
A
C
C
C
C
(C)x 9pcs
(1)x 18pcs
Allen Wrench
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
18pcs
1pcs
2pcs
A 2pcs
L/R Stand
Caster w/Stopper
No Hardware List Qty No QtyParts List
Hexagon Screw
Allen Wrench
4 2pcs
Caster
B
C
3pcs
9pcs
Cross Bar
Metal Panel