Assembly Instruction
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: support@furinno.com
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
7.1 Attach Panel(E)to Panel(C),
as shown in Picture 1.
7.2 Attach Panel(F)slowly in
the middle of Panel(D)&(E),
as shown in Picture 2.
STEP 7
Turn over unit 180°.Attach Panel(K)to the
assembled body using Power Pin(7).
STEP 10
Attach Panel(B)to assembled unit and lock all
Cam-Lock Nut(2)&(8).
STEP 9
8.1 Attach Panel(I)to
Panel(C),as shown
in Picture 3.
8.2 Lay down the unit
and attach Panel(G)
on Panel(F)as shown
in Picture 4.
Note: Lock all Cam-Lock
Nut(2)using screwdriver.
STEP 8
Recommended Maximum Weight
Furinno Econ Computer Desk w/Bins
1309020140428
MODEL :
13090
32”(W) x 30”(H) x 15.5”(D)DIMENSION :
*Unit in Pound(lbs)
Picture 1 Picture 2
Picture 3
25
finished
edge
Picture 4
unfinished
surface
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
finished
edge
unfinished
surface
finished
edge
finished
edge
finished
edge
unfinished
surface
K
(7)x8pcs
unfinished
surface
unfinished
surface
finished
edge
finished
edge
finished
edge
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
Tool RequiredTool RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 30 minutes
Power Pin Style
STEP 3
3.1 Install Mini Cam-Lock Nut(8)and Dowel(4)on Panel(D)(E)(F)(H)(I)&(J).
3.2 Insert Dowel(4)into the pre-drilled holes on Panel(G),as shown.
Note: Arrow on Cam-Lock Nut(2)should be pointing outward.
STEP 1
Install Cam-Lock Screw(1)and Nail Leg(6)on Panel(B)&(C).
STEP 2
Install Cam-Lock Nut(2)and
Dowel(4)on Panel(A),as shown.
STEP 4
4.1 Attach Panel(H)to Panel(A)
using Screw(3).
4.2 Attach Panel(J)to Panel(D)
using Screw(3).
STEP 6
Attach Panel(D)&(J)to Panel(C)
using Cam-Lock Nut(2).
Note: Lock all Cam-Lock Nut(2)
uisng screwdriver.
Attach Panel(A)&(H)to Panel(C)
using Cam-Lock Nut(2).
STEP 5
finished
edge
unfinished
surface
(4)x4pcs
(2)x6pcs
finished
edge
finished
edge
finished
edge
finished
edge
(1)x10pcs
(1)x10pcs
(6)x2pcs
(6)x2pcs
finished
edge
finished
edge
finished
edge
unfinished
surface
unfinished surface
unfinished surface
finished
edge
finished
edge
finished
edge
finished
edge
unfinished surface
finished
edge
finished
edge
unfinished
surface
unfinished
surface
finished
edge
finished
edge
finished
edge
unfinished
surface
(4)x4pcs
(8)x4pcs
finished
edge
unfinished
surface
(4)x4pcs
(8)x4pcs
(4)x4pcs
(8)x1pcs
(1)x1pcs
(4)x2pcs
(8)x2pcs
(4)x2pcs
(8)x2pcs
(4)x4pcs
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
21pcs
6pcs
8pcs
A 1pcs
Top Panel
Screw
No Hardware List Qty No QtyParts List
Cam-Lock Screw
Cam-Lock Nut
4
5
6
26pcs
2pcs
4pcs
Nail Leg
Dowel
Bin
7
8
8pcs
15pcs
Mini Cam-Lock Nut
Power Pin
B
C
1pcs
1pcs
Right Side Panel
Left Side Panel
D
E
F
1pcs
1pcs
1pcs
Center Panel
Top Shelf Panel
Bottom Panel
G
H
1pcs
1pcs
Top Back Bar
I 1pcs
Bottom Panel
Center Shelf Panel
J 1pcs
Center Back Panel
K 1pcs
Back Panel
finished
edge
unfinished surface
(4)x2pcs
(8)x2pcs
Loading...