Funtin FTH-KBL1 User Manual

2

≤0.3 m

1~4 m

1

Product Introduction

CONTACT

Websit : https://www.funtintech.com

Tel : [phone]

eMail: [e-mail]

Address :

B201 4F Niulanqian Build Baoan District Shenzhen, China

Zip : 518000

Welcome to follow our facebook:

https://www.facebook.com/funtintech,

any questions can leave a message to tell us,

we will reply you ASAP.

THANK YOU FOR READING :)

Funtin Home natural gas detector is for natural gas, Oil liquefied
petroleum gas detection equipment. If there is gas at home, once

the concentration of the detected gas reaches the dangerous
value, the detector will send out the audible and visual alarm
signal, prompting you to take effective measures quickly to
eliminate the danger and effectively avoid the accidents such as
fire and explosion.

Sensor

The core of the original - sensors, gas-sensing electrodes with
100% pure platinum precious metal manufacturing.

Double alarm

Up to 70 dB of audible alarm, 360 ° ring warning lights.

Design

Radian design is not only simple and elegant, more to improve
the efficiency of intake, so that detectors 7x24 hours to keep
sensitive and stable.

Carefully selected polycarbonate, strict implementation of fire
safety requirements.

Just right of the matte process, the design has long been full of
sense of ether home security products.

Indicator State Description

Power indicator light is on, indicating that the detector is working
normally.
Green light flashes, indicating that the detector is self-test and
preload.
Yellow light flashes , indicating that the detector is in a fault
condition.

Red light flashes, indicating that the detector is alarming.

Instructions

Products Schematic

Installation Instructions

Installation Location

the detector and the gas stove should be located in the
same indoor space;

≥1. 2m

the detector distance may be 1 to 3 meters away from the
gas leak source is the best.

the detector should be installed in the distance from the
ceiling 30cm height of the wall fixed position.

the standard mounting position

is 30cm from the ceiling. If there

is no power outlet, install it at a

dista nce of 120cm from t he

ground.

Precautions

can not be installed from the gas stove too close to the
place!

can not be installed in the place with too much smoke!

can not be installed in the exhaust fan, doors and windows,
bathrooms and other large airflow or humidity larger place!

3

The Key Function Introduction

Self-test function: self-test key for detecting the sound
and light alarm is abnormal.

No alarm state, press the self-test button, the ring
indicator light green, red, yellow flashing, while the
buzzer sounds three times.

If the ring indicator light or buzzer is abnormal, please
repair it in time.

Funtin Home Natural Gas Detector Manual

FTH-KBL1

Natural Gas (methane - CH4)

100g

Semiconductor

59mm * 59mm * 40mm

Natural diffusion

DC 100V - 240V

0-100% LEL

180s ± 10s

7% ± 3% LEL

Visible and Audible alarm

Temperature: -20 to 40
Humidity: ≤ 95% RH (no frost)

70dB

5 years

Model

Applicable Gas

Weight

Overall Dimensions

Sampling Method

Working Voltage

Range

Self-test Time

Alarm Setpoint

Alarm

Working
Environment

Alarm Volume

Service Life

Sensor Type

5

6

Failure

Phenomenon

The power cord

is not

connected well

Power i nd icato r

has fai led

Press the self-test

button without

sound and
light alarm

Circuit failure

No response

to detection

of gas

Pre-boot program

has not ended

Circuit failure

After the

pre-start

procedure,

the detector has

been in the

alarm state

In the environment

there are a large

number of volatile

organic compounds.

Place the
detector in
a clean air

environment

and restart the

self-test

program.

Storage time

is longer

Circuit failur

Please connect

the power

cord well

Please contact

the seller

Please contact

the seller

Wait for the

program

to finish

Please
contact

the seller

Please contact

the seller

Continue to
power aging

The green power

indicator does

not light

7

Main Specifications Common faults and solutions

Failure Analysis

Treatment

Program

After-sales policy and warranty policy

THIS PRODUCT SUPPORTS ONE-YEAR FREE REPLACEMENT, BUT IF NON-

NORM AL USE DOES NO T ENJ OY THE WARRANT Y (FOR E XAMPLE:

LIGHTNING, VOLTAGE INSTABILITY, WATER AND OTHER MAN-MADE) .

4

Equipment Maintenance

1. this product after storage and long-distance transport, the first
time in need of electricity aging more than 24 hours in order to
achieve the best performance.

2. start the product self-checking function every 4-6 months.

IN THE CASE OF SAFET Y TO ENSUR E THE USE OF A KNOWN
CONCENTRATION OF GAS ON THE DETECTOR FOR IMPACT TESTING
TO CONFIRM WHETHER THE DETECTOR WORK.
BE SURE TO TEST IN A SAFE ENVIRONMENT!

3. please often use a soft brush, velvet cleaning equipment,
surface dust and oil, to ensure that its detection hole breathable,
indicating good display. When cleaning, do not use detergents,
bleach and so on.

4. This product is designed for indoor use only, please avoid
contact with rain or moisture, also need to avoid the detector
drop, do not beat, open or change it, otherwise it may lead to
product failure.

5. should not be used near the detector volatile substances, such
as alcohol, hair gel and so on. If this kind of material causes the
false report, please promptly ventilates, causes the detector to
return to the normal examination condition.

6. under normal circumstances, the maximum life of the detector
for 5 years, more than the use of the period must be replaced
with new ones.